Cover Image

Mechanics of bonded and adhesively-bonded joints /

Mechanics of Bonded and Adhesively Bonded Joints provides an overview of the most effective analytical solutions for common bonded and adhesively bonded joints. In each type of joint analyzed, the analytical stress solution is formulated and final numerical results are provided for easy use and self...

Full description

Bibliographic Details
Main Author: Wu, Xiang-Fa (Author)
Corporate Author: ScienceDirect (Online service)
Format: eBook
Language:English
Published: Amsterdam ; Cambridge, MA : Elsevier, [2025]
Subjects:
Adhesive joints.
Assemblages collés.
Electronic books.
Online Access:Connect to the full text of this electronic book
Table of Contents:
  • Front Cover
  • Mechanics of Bonded and Adhesively Bonded Joints
  • Copyright Page
  • Contents
  • 1 Introduction to joining technology and classification of joints
  • 1.1 Historical development of joining technology
  • 1.2 Stress and strength analysis of joined structures
  • 1.3 Adhesives
  • 1.4 Design and failure criteria
  • References
  • 2 Fundamentals to elasticity
  • 2.1 Introduction
  • 2.2 Stress
  • 2.3 Plane-stress transformation
  • 2.3.1 Uniaxial stress state
  • 2.3.2 Pure shear stress state
  • 2.3.3 Biaxial-stress state
  • 2.4 Principal stresses, principal directions, and maximum shear stress in plane-stress state
  • 2.5 Spatial stress transformation
  • 2.6 Principal stresses, principal directions, and maximum shear stress in spatial stress
  • 2.7 Strain
  • 2.8 Constitutive laws of linearly elastic material models
  • 2.9 Stress equilibrium equations
  • 2.10 Solutions to plane elasticity problems
  • 2.10.1 Basic plane elasticity equations and solutions in Cartesian coordinate system
  • 2.10.1.1 In the case of plane-strain loading
  • 2.10.1.2 In the case of plane-stress loading
  • 2.10.2 Basic plane elasticity equations and solutions in polar coordinate system
  • 2.10.2.1 Axisymmetric problems
  • 2.11 Variational principles of elasticity
  • 2.11.1 Strain energy density of elastic bodies
  • 2.11.2 Fundamental variational principles of elasticity
  • 2.11.2.1 Theorem of virtual displacements
  • 2.11.2.2 Theorem of minimum potential energy
  • 2.11.2.3 Theorem of virtual work
  • 2.11.2.4 Theorem of minimum complimentary energy
  • 2.11.2.5 Castigliano's (second) theorem
  • References
  • 3 Introduction to fracture mechanics
  • 3.1 Basic concepts of fracture mechanics
  • 3.2 Linear and nonlinear elastic fracture mechanics
  • 3.2.1 Crack modes, stress intensity factor, strain energy release rate, and J-integral
  • 3.2.1.1 Crack modes.
  • 3.2.1.2 Stress intensity factor
  • 3.2.1.3 Energy release rate
  • 3.2.2 Energy release rate in a cracked plate in load-control fracture test
  • 3.2.3 Energy release rate in a cracked plate in displacement-control fracture test
  • 3.2.4 Nonlinear energy release rate J
  • 3.2.5 Path-independent J-integral
  • 3.2.6 Calculation of strain energy release rate and mode partition
  • 3.2.6.1 Calculation of energy release rate and applications
  • 3.2.7 Method of energy release rate partition
  • 3.2.8 Relationship between stress intensity factor (K) and energy release rate (G)
  • 3.3 Crack tip plasticity
  • 3.3.1 Strip-yield model-Dugdale-Barenblatt model
  • 3.3.2 Plastic zone profile
  • 3.4 Interfacial fracture
  • 3.4.1 Stress intensity factor and energy release rate
  • 3.4.2 Phase angle of stress intensity factor and oscillating stresses
  • 3.4.3 Mode angle
  • 3.4.4 Small-scale contact
  • References
  • 4 Selected analytic solutions to interfacial stresses and strength of bonded and adhesively bonded joints
  • 4.1 Introduction
  • 4.2 Selected analytical solutions for ABJs
  • 4.2.1 Elementary strength-of-material model
  • 4.2.2 Volkersen model
  • 4.2.3 Goland and Reissner model
  • 4.2.4 Hart-Smith model
  • 4.2.5 Obalvo and Eidinoff model
  • 4.2.6 Bigwood and Cromcombe model
  • 4.2.7 Chang's interfacial-stress series expansion method
  • 4.2.8 Adam and Peppiatt tubular joint model
  • 4.2.9 Chen and Cheng tubular joint model
  • 4.3 Conclusions
  • References
  • 5 Stress-function variational method for interfacial stress analysis of bonded joints
  • 5.1 Introduction
  • 5.2 Interfacial stresses of single-sided joints
  • 5.2.1 Static equilibrium equations and deformation compatibility
  • 5.2.2 Stress resultants in adherends
  • 5.2.3 Stress components in adherends
  • 5.2.3.1 Stresses in reinforcing patch
  • 5.2.3.2 Stresses in substrate bar.
  • 5.2.4 Governing ordinary differential equation of interfacial stress functions and solution
  • 5.2.5 Interfacial stresses of single-sided joints under mechanical loads
  • 5.2.6 Interfacial stresses in a bimaterial thermostat due to thermal loads
  • 5.3 Interfacial stresses of single-sided strip joints
  • 5.3.1 Stress resultants in adherends
  • 5.3.2 Planar stress components in adherends
  • 5.3.2.1 Planar stresses in the cover layer
  • 5.3.2.2 Planar stresses in the substrate layers
  • 5.3.3 Governing ordinary differential equations of interfacial stress functions and solution
  • 5.3.4 Interfacial stresses in single-sided strap joints under mechanical loads
  • 5.3.5 Thermomechanical interfacial stresses in a bimaterial thermostat
  • 5.3.6 Scaling analysis of interfacial stresses of single-sided strap joints
  • 5.3.6.1 Scaling analysis of interfacial stresses due to mechanical loads
  • 5.3.6.2 Scaling analysis of interfacial stresses due to a pure temperature change
  • 5.4 Interfacial stresses of bonded single-lap joints
  • 5.4.1 Traction boundary conditions and stress resultants in adherends
  • 5.4.2 Stress components in adherends
  • 5.4.2.1 Stress components in the upper adherend
  • 5.4.2.2 Stress components in the lower adherend
  • 5.4.3 Governing ordinary differential equations of interfacial stress functions and solution
  • 5.4.4 Interfacial stresses in bonded single-lap joints free of shear force
  • 5.4.5 Interfacial stresses in bonded single-lap joints under shear and bending
  • 5.4.6 Scaling analysis of interfacial stresses under mechanical loads
  • 5.5 Conclusion
  • Appendix
  • References
  • 6 Applications of stress-function variational method for adhesively bonded joints
  • 6.1 Introduction
  • 6.2 Interfacial stresses of adhesively single-sided strap joints.
  • 6.2.1 Static equilibrium equations, stress resultants, and traction boundary conditions
  • 6.2.1.1 Static equilibrium equations
  • 6.2.1.2 Stress resultants and traction boundary conditions
  • 6.2.2 Planar stresses in adherends and adhesive layer
  • 6.2.2.1 Planar stresses in the upper adherend
  • 6.2.2.2 Planar stresses in the lower adherends
  • 6.2.2.3 Planar stresses in the adhesive layer
  • 6.2.3 Governing ordinary differential equations of interfacial stress functions and solution
  • 6.2.4 Interfacial stresses in adhesively single-sided strap joints under mechanical loads
  • 6.2.5 Thermomechanical interfacial stresses in adhesively bonded thermostats
  • 6.2.6 Scaling analysis of interfacial stresses in adhesively single-sided strap joints
  • 6.2.6.1 Scaling analysis of interfacial stresses due to mechanical loads
  • 6.3 Interfacial stresses of adhesively bonded single-lap joints
  • 6.3.1 Traction boundary conditions and stress results in adherends
  • 6.3.2 Planar stresses in adherends and adhesive layer
  • 6.3.3 Governing ordinary differential equations of interfacial stress functions and solution
  • 6.3.4 Interfacial stresses in adhesively bonded single-lap joint under shearing
  • 6.3.5 Scaling analysis of interfacial stresses of adhesively bonded single-lap joints
  • 6.4 Interfacial stresses of adhesively single-sided joints
  • 6.4.1 Stress resultants in adherends and adhesive layer
  • 6.4.2 Planar stresses in adherends and adhesive layer
  • 6.4.3 Interfacial stresses of adhesively single-sided joints under uniaxial tension
  • 6.4.4 Scaling analysis of thermomechanical interfacial stresses in adhesively single-sided joints
  • 6.5 Conclusion
  • Appendix
  • MATLABTM scripts for interfacial stress analysis of an adhesively bonded single-lap joint
  • MATLAB code
  • References
  • 7 Strength and toughness of bonded and adhesively bonded joints.
  • 7.1 Introduction
  • 7.2 Strength of materials criteria and joint design
  • 7.2.1 Adhesive failure criteria
  • 7.2.1.1 Maximum principal stress and strain based criterion
  • 7.2.1.2 Zone-based criteria (finite-zone criteria)
  • 7.2.1.3 Strain energy-density-based criteria
  • 7.2.2 Adherend failure criteria
  • 7.2.2.1 Failure criteria for laminated composite adherends
  • 7.2.2.2 Criteria for interlaminar fracture of laminated composite adherends
  • 7.3 Fracture mechanics criteria
  • 7.3.1 Debonding criteria of structural joints
  • 7.3.2 Computational methods for strain energy release rates
  • 7.3.3 Examples of strain energy release rate of joints
  • 7.4 Cohesive zone model of joint debonding
  • 7.4.1 Introduction of cohesive zone model
  • 7.4.2 Cohesive zone model-based finite element analysis of joint debonding
  • 7.5 Conclusions
  • References
  • 8 Mechanical behavior of adhesives
  • 8.1 Introduction
  • 8.2 Basic linearly viscoelastic models
  • 8.3 Stress relaxation, creeping, and spring back
  • 8.3.1 Maxwell model
  • 8.3.2 Kevin model
  • 8.3.3 Three-parameter standard linear solid models
  • 8.4 Dynamic and thermal effects in viscoelastic materials
  • 8.4.1 Complex modulus and complex compliance of viscoelastic materials
  • 8.4.2 Principle of time-temperature superposition of adhesives
  • 8.5 Viscoelastic fracture of a double cantilever beam
  • 8.6 Conclusion
  • Appendix
  • References
  • 9 Applications of joining theories
  • 9.1 Introduction
  • 9.2 Progressive cracking analysis of surface coatings
  • 9.2.1 Problem formulation and solution
  • 9.2.1.1 Stress field and strain energy of a surface-cracked coating system
  • 9.2.2 Progressive cracking analysis
  • 9.2.2.1 Critical loading and temperature change for appearance of first cracking in surface coating layers
  • 9.2.2.2 Progressive cracking and crack spacing in surface coating layers.