http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Intro -- Contents -- Preface -- The Authors -- The Editor -- The Co-Authors -- 1 Introduction -- Dr. Ruben Schlutter -- 1.1 Defect Patterns in Injection Molding -- 1.2 Preparation of a Specification Sheet and Functional Specification Sheets -- 2 Tool Steels and Their Coatability -- Markus Pothmann -- 2.1 Introduction -- 2.1.1 Definition of Tool Steels -- 2.1.2 Development of Tool Steels -- 2.1.3 Types of Tool Steels -- 2.2 Injection Molding Tool Steels -- 2.2.1 Introduction -- 2.2.2 Properties of Injection Molding Tool Steels -- 2.2.3 Composition of Injection Molding Tool Steels
2.2.4 Heat Treatment of Injection Molding Tool Steels -- 2.2.5 Surface Treatment of Injection Molding Tool Steels -- 2.2.6 Maintenance and Care of Injection Molding Tool Steels -- 2.3 Selection of Injection Molding Tool Steels -- 2.3.1 Factors that Influence the Choice of Material for Injection Molding Tool Steels -- 2.3.2 Challenges in the Selection of Injection Molding Tool Steels -- 2.3.3 Selecting Materials for Injection Molding Tool Steels -- 2.3.4 Future Development of Injection Molding Tool Steels -- 3 Fundamentals of Coating Technologies
3.1 Electrolytically Deposited Metallic Layers and Hybrid Systems -- Dr. Orlaw Massler -- 3.1.1 Background and Challenges -- 3.1.2 Galvanic Layers -- 3.1.2.1 Challenges and Actions -- 3.1.3 Electroless Separation -- 3.1.3.1 Electroless Nickel Plating -- 3.1.3.2 Principle of Electroless Nickel Plating -- 3.1.3.3 Electroless Nickel Coatings with Solid Additives (Dispersion) -- 3.1.3.4 Dispersion Layers as a Special Case -- 3.1.3.5 Friction-Increasing Layers -- 3.1.3.6 Sensor- and Indicator Layers -- 3.1.4 Loading Types -- 3.1.5 Coating-Compatible Design -- 3.2 Physical Vapor Deposition
Dr. Ruben Schlutter -- 3.2.1 Introduction -- 3.2.2 Process Variants -- 3.2.2.1 Evaporation -- 3.2.2.2 Sputtering -- 3.2.2.3 Ion Plating -- 3.2.3 Layer Growth and Adhesion Mechanisms for PVD Coatings -- 3.2.4 Multilayer Coating Systems -- 3.3 Chemical Vapor Deposition -- 3.3.1 Metalorganic Chemical Vapor Deposition -- Vanessa Frettlöh -- 3.3.1.1 Classification of the Technology -- 3.3.1.2 Processes during MOCVD-coating -- 3.3.1.3 Requirements for Organometallic Precursors -- 3.3.1.4 Structure of an MOCVD System -- 3.3.1.5 Gap mobility and 3D capability of the coatings
3.3.2 Solid-Based Chemical Vapor Deposition -- Dr. Ruben Schlutter -- 3.3.2.1 Basics of CVD with Solid Precursors -- 3.3.2.2 Transport of the Solid Precursor -- 3.3.3 Plasma-Based Chemical Vapor Deposition -- Patrick Engemann -- 3.3.3.1 Plasmas -- 3.3.3.2 Plasma-Activated Chemical Vapor Deposition -- 3.3.4 Precursors -- Molecular Sources for Functional Materials -- Prof. Dr. Sanjay Mathur, Dr. Veronika Brune, and Dr. Thomas Fischer -- 3.3.4.1 Chemical Strategies in Material Synthesis -- 3.3.4.2 Outlook -- 3.4 Simulation of Layer Deposition -- Ameya Kulkarni -- 3.4.1 Introduction
Description based upon print version of record.
3.4.2 Theoretical Principles and Experimental Setup