Cover Image

High Temperature Miniature Specimen Test Methods.

Bibliographic Details
Main Author: Sun, Wei
Corporate Author: ScienceDirect (Online service)
Other Authors: Yue, Zhufeng, Zhou, Guoyan, Wen, Zhixun, Li, Ming
Format: eBook
Language:English
Published: San Diego : Elsevier, 2023.
Subjects:
Materials > Testing.
Materials > Creep.
Matériaux > Essais.
Matériaux > Fluage.
creep.
Electronic books.
Online Access:Connect to the full text of this electronic book
Table of Contents:
  • Front Cover
  • High Temperature Miniature Specimen Test Methods
  • High Temperature Miniature Specimen Test Methods
  • Copyright
  • Contents
  • About the authors
  • Foreword
  • 1
  • Introduction
  • 1.1 Conventional creep test specimen requirements
  • 1.1.1 Full-size cylindrical uniaxial specimen test
  • 1.1.2 Subsize cylindrical uniaxial specimen test
  • 1.2 Need to extract material properties from small volume of material
  • 1.3 Requirements for material evaluation and structural integrity
  • 1.3.1 General background
  • 1.3.2 Fusion materials
  • 1.3.3 Condition monitoring and life management
  • 1.3.4 Gas turbine blades
  • 1.4 Scope of the book
  • References
  • 2
  • Basic material behavior models for creep and viscoplasticity
  • 2.1 Introduction
  • 2.2 Norton power law secondary creep model
  • 2.2.1 The model
  • 2.2.2 Estimating material constants
  • 2.3 Creep damage mechanics models
  • 2.3.1 The models
  • 2.3.1.1 Kachanov creep damage model
  • 2.3.1.2 Liu and Murakami creep damage model
  • 2.3.1.3 Three-parameter creep damage (Dyson) model
  • 2.3.2 Estimating material constants
  • 2.3.2.1 Experimental data
  • 2.3.2.2 Parameter identification
  • 2.3.2.3 Model calibration
  • 2.4 Unified viscoplasticity model
  • 2.4.1 The basic model
  • 2.4.2 Estimating material constants
  • 2.4.2.1 Experimental data
  • 2.4.2.2 Parameter identification
  • 2.4.2.3 Model calibration
  • 2.5 Other models
  • Nomenclature
  • References
  • Further reading
  • 3
  • Small punch test
  • 3.1 Background and test standards
  • 3.1.1 Background
  • 3.1.2 Test standards
  • 3.2 Small punch tensile test
  • 3.2.1 Data interpretation method
  • 3.2.1.1 Force-deflection curve parameters
  • 3.2.1.2 Empirical correlations of yield stress and ultimate tensile strength
  • 3.2.1.3 Determination of Fe
  • 3.2.2 Typical test data
  • 3.3 Small punch creep test
  • 3.3.1 Data interpretation method
  • 3.3.2 Typical test data
  • 3.4 Practical applications, complexities, and limitations
  • 3.4.1 Practical applications
  • 3.4.2 Complexities
  • 3.4.2.1 Stress states
  • 3.4.2.2 Effect of friction
  • 3.4.2.3 Effect of initial plasticity straining
  • 3.4.2.4 Effect of clamping and constant volume
  • 3.4.3 Limitations
  • Nomenclature
  • Appendix 3.1 Summary of Chakrabarty's membrane stretching theory
  • Appendix 3.2 Cone model for equivalent stress and punch displacement
  • Appendix 3.3 Membrane stretching-based creep damage analytical solutions
  • A3.3.1 Creep damage constitutive equations
  • A3.3.2 Stresses
  • A3.3.3 Creep damage evolution and failure life
  • A3.3.4 Punch displacement and minimum displacement rate
  • Strain energy formulations
  • Punch displacement-time solution
  • Minimum displacement rate
  • References
  • 4
  • Impression creep test with a rectangular indenter
  • 4.1 Background
  • 4.2 Data interpretation method
  • 4.2.1 Data conversion of impression creep test
  • 4.2.2 Reference stress method
  • 4.2.3 Use of rectangular indenter