http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
1 online resource (xxi, 574 pages) : illustrations
Front Cover; Progress in Rubber Nanocomposites; Copyright Page; Contents; List of contributors; Woodhead publishing series in composites science and engineering; 1 General introduction to rubber compounding; Abbrevations; 1.1 Compounding and its importance; 1.2 Introduction to compounding ingredients; 1.2.1 Elastomers; 1.2.1.1 Natural rubber; Latex concentrate; Technically specified rubber (TSR) and sheet rubber; Properties of natural rubber; Applications; 1.2.1.2 Synthetic rubbers; General purpose synthetic rubbers; Styrene-butadiene rubber (SBR); Applications; Polybutadiene (PBR/PBD).
Properties of PBDApplication; Polyisoprene rubber (IR); Properties IR; Applications; Special purpose and speciality synthetic rubbers; Butyl Rubbers (IIR-isobutylene isoprene rubber); Properties; Applications; Ethylene-propylene rubber (EPM/EPDM); Properties; Application; Nitrile rubber (NBR); Applications; Polychloroprene rubber (CR); Types of Neoprene rubber; Properties; Applications; Silicone rubber (Q rubber); Types of silicone polymers; Properties; Limitations of silicones; Applications; Ethylene-vinyl Acetate copolymer (EVA); Fluorocarbon rubber (FKM); Examples; Properties; Applications.
Chlorosulfonated polyethylene (CSM)Properties of CSM; Applications; Polyurethane rubbers (PUR); Polyacrylate rubbers (ACM); Polysulfide rubber (T rubber); Properties; Applications; 1.2.1.3 Thermoplastic elastomers (TPE); 1.2.2 Peptizers; 1.2.3 Activators; 1.2.4 Fillers; 1.2.4.1 One-dimensional nanofiller; 1.2.4.2 Two-dimensional nanofillers; 1.2.4.3 Three-dimensional nanofillers; 1.2.4.4 Reinforcing and non reinforcing fillers; Reinforcing Fillers; Nonreinforcing fillers; 1.2.5 Processing aids; 1.2.5.1 Plasticizers; Petroleum-based; Ester plasticizers; 1.2.5.2 Other processing aids.
1.2.6 Accelerators1.2.6.1 Accelerators based on chemical structures; 1.2.6.2 Accelerators based on functional action; 1.2.7 Antidegradents; 1.2.7.1 Antioxidants; 1.2.7.2 Antiozonants; 1.2.8 Curing agents; 1.2.8.1 Sulfur; Sulfur donors (sulfur bearing chemicals); 1.2.8.2 Peroxides; 1.2.8.3 Resin curing; 1.2.8.4 Metal oxides curing; 1.2.9 Special purpose additives; 1.2.9.1 Blowing agents; 1.2.9.2 Silane coupling agents; 1.2.9.3 Antistatic agents; 1.2.9.4 Flame retardants; 1.3 Rubber processing equipments; 1.3.1 Mixing equipments; 1.3.1.1 Two roll mill; 1.3.1.2 Internal mixer.
1.3.1.3 Continuous mixers1.3.2 Molding equipments; 1.3.2.1 Compression molding; 1.3.2.2 Transfer molding; 1.3.2.3 Extrusion molding; Calendering; 1.4 Different vulcanization methods; 1.5 Testing of compounded rubber; 1.5.1 Processability of rubber compounds; 1.5.2 Cure studies and viscosity; 1.5.3 Mechanical properties of compounded rubber; 1.5.3.1 Tensile and tear properties; 1.5.3.2 Hardness (ASTM D 2240, ASTM D 1415); 1.5.3.3 Set properties; 1.5.3.4 Abrasion resistance (ASTM D 5963); 1.6 New trends in rubber compounding; 1.6.1 Green compounding; 1.6.2 REACH regulations.
Includes bibliographical references and index.
Technical & Manufacturing Industries & Trades
Woodhead Publishing series in composites science and engineering ; no. 75