http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology.
Front Cover; Adhesives Technology Handbook; Copyright Page; Contents; Preface to Third Edition; Preface to Second Edition; Acknowledgments; 1 Introduction and Adhesion Theories; 1.1 Definition of Adhesives and Adhesive Bonding; 1.2 Functions of Adhesives; 1.3 Classification of Adhesives; 1.4 Advantages and Disadvantages of Joining Using Adhesives; 1.4.1 Advantages; 1.4.2 Disadvantages; 1.5 Requirements of a Good Bond; 1.5.1 Proper Choice of Adhesive; 1.5.2 Good Joint Design; 1.5.3 Cleanliness; 1.5.4 Wetting; 1.5.5 Adhesive Bonding Process; 1.6 Introduction to Theories of Adhesion.
1.6.1 Mechanical Theory1.6.2 Electrostatic (Contact Charging) Theory; 1.6.3 Diffusion Theory; 1.6.4 Wetting Theory; 1.6.5 Chemical Bonding; 1.6.5.1 Acid-Base Theory; 1.6.6 Weak Boundary Layer Theory; 1.7 Definition of Failure Modes; 1.8 Mechanisms of Bond Failure; References; 2 Surface Tension and Its Measurement; 2.1 Introduction; 2.2 What Is an Interface?; 2.3 Surface Tension; 2.4 Surface Free Energy; 2.4.1 Surface Energy of Solids; 2.4.2 Work of Adhesion; 2.5 Contact Angle (Young's Equation); 2.6 Effect of Temperature on Surface Tension; 2.7 Surface Tension Measurement.
2.7.1 Measurement for Liquids: du Nouy Ring and Wilhelmy Plate Methods2.7.2 Measurement for Solids: Liquid Homolog Series; References; 3 Material Surface Preparation Techniques; 3.1 Introduction; 3.2 General Considerations; 3.3 Surface Treatment of Metals; 3.4 Cleaning (Degreasing) Metals; 3.4.1 General Sequence of Cleaning; 3.4.1.1 Solvent Cleaning; Vapor Degreasing; Ultrasonic Vapor Degreasing; Ultrasonic Cleaning with Liquid Rinse; Safety; 3.4.1.2 Intermediate Cleaning; Grit Blasting (Contributed by Dr. Laurence W. McKeen); 3.4.1.3 Chemical Treatment; 3.5 Priming; 3.6 Sol-Gel Process.
3.7 Surface Treatment of Plastics3.7.1 Effect of Treatment on Plastic Surfaces; 3.7.2 Surface Cleaning; 3.7.3 Mechanical Treatment (Surface Roughening); 3.7.4 Corona Treatment; 3.7.4.1 Three-Dimensional Corona Treatment; 3.7.4.2 Corona Treatment Under Chemical Atmosphere; 3.7.5 Flame Treatment; 3.8 Methods for Evaluating Effectiveness of Surface Preparation; 3.8.1 Dyne Liquids; 3.8.2 Water-Break Test; 3.8.3 Contact-Angle Test; 3.9 Surface Exposure Time; References; 4 Classification of Adhesives and Compounds; 4.1 Introduction; 4.2 Adhesive Composition Formulation.
4.2.1 Adhesive Base or Binder4.2.2 Hardener (for Thermosetting Adhesives); 4.2.3 Solvents; 4.2.4 Diluents; 4.2.5 Fillers; 4.2.6 Carriers or Reinforcements; 4.2.7 Other Additives; 4.3 Classification of Adhesives; 4.3.1 Source: Natural vs. Synthetic Adhesives; 4.3.1.1 Natural Adhesives; Starch and Dextrin; Gelatine (Animal, Fish, Vegetable Glues); Asphalt and Bitumen; Natural Rubber; Resins, Shellac; 4.3.1.2 Synthetic Adhesives; 4.3.2 Classification by Chemical Composition; 4.3.2.1 Thermosetting Adhesives; 4.3.2.2 Thermoplastic Adhesives; 4.3.2.3 Elastomeric Adhesives; 4.3.2.4 Adhesive Alloys.
Includes bibliographical references and index.