http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Proceedings of the International Symposium on Reduction and Casting of Aluminum, Montreal, Canada, August 28-31, 1988
International Symposium on Reduction and Casting of Aluminum (1988 : Montréal, Quebéc)
1 online resource (vii, 338 pages) : illustrations
The International Symposium on Reduction and Casting of Aluminum is sponsored by the newly founded Light Metals Section. The Symposium will feature casthouse process control, operations, structure and grain refining, carbon, cast alloy modifications, alumina and aluminum - controls and measurements, process and operations.
Front Cover; Reduction and Casting of Aluminum; Copyright Page; Table of Contents; PART I: CASTHOUSE STRUCTURE AND GRAIN REFINING; CHAPTER 1. INFLUENCE OF BASE METAL GRAIN SIZE ON THE ALUMINUM WELD BEAD STRUCTURE -- INTRODUCTION; PROCEDURES; RESULTS AND DISCUSSION; CONCLUSIONS; REFERENCES; CHAPTER 2. INJECTION OF NON-WETTING PARTICLES INTO MELTS -- INTRODUCTION; MODELLING CRITERIA; APPARATUS AMD EXPERIMENTAL PROCEDURE; RESULTS; DISCUSSION AND CONCLUSION; ACKNOWLEDGEMENT; REFERENCES; CHAPTER 3. IMPACT OF LIQUID METAL PROCESSING AND NEW ALLOY DEVELOPMENT ON MAGNESIUM MARKETS
Chapter 4.the refining of hypoeutectic al-si alloys by fractional solidificationintroduction; theory; experimental; results and discussion; summary; acknowledgements; references; chapter 5.effect of be on the precipitation kinetics of al-0.75%mg-0.5%si alloy -- introduction; experimental; results and discussion; acknowledgement; references; chapter 6.the utilization of niobium as aluminum grain refiner -- introduction; experimental procedures; results and discussions; conclusions; references.
CHAPTER 7. INFLUENCE OF MOULD GEOMETRY ON THE REFINEMENT OF ALUMINUM-12% SILICON ALLOY BY CONTROLLING HEAT EXTRACTION RATES DURING DURING SOLIDIFICATIONINTRODUCTION; EXPERIMENTAL DETAILS; MATHEMATICAL MODEL; RESULTS AND DISCUSSION; CONCLUSIONS; LIST OF SYMBOLS; REFERENCES; PART II: CARBON; CHAPTER 8. PERFORMANCE OF A PASTE WITH A HIGH SOFTENING POINT PITCH FOR SODERBERG ANODES -- INTRODUCTION; LAB RESULTS; PASTE PRODUCTION 1 (Kitimat); POTLINE TEST 1; RESULTS 1; PASTE PRODUCTION 2 (Grande Baie); POTLINE TEST 2; RESULTS 2; DISCUSSION; REFERENCES.
Chapter 9.the horizontal flue ring furnace in a new functional and constructive conceptchapter 10.new design to increase service life of horizontal flue ring furnace -- introduction; choice of anode size; choice of furnace size; a furnace with minimal deformation; deformation of concrete shell; new design of furnace; furnace structure calculation; conclusion; references; chapter 11. modelling of the coke calcining kiln -- 1. the carbon calcining process; 3. past kiln modelling; 1 new steady-state lumped-parameter model; 5. results; 6. conclusion; 7. acknowledgements; references.
Chapter 12. vertical flue ring furnaces: energetical implications of the correlations between operational characteristicspart iii: casthouse process control and operations; chapter 13.mathematical modelling of flows in holding furnaces containing molten aluminum -- introduction; preliminary analysis; the natural convection problem; numerical methods used; results a n d discussion; conclusions; references; chapter 14. a quick melting unit for non-ferrous metals -- introduction; traditional furnaces in the foundry; description of the qmu; operation of the qmu; conclusion.
Master and use copy. Digital master created according to Benchmark for Faithful Digital Reproductions of Monographs and Serials, Version 1. Digital Library Federation, December 2002. http://purl.oclc.org/DLF/benchrepro0212 MiAaHDL
digitized 2010 HathiTrust Digital Library committed to preserve pda MiAaHDL
Includes bibliographical references and index.
Technical & Manufacturing Industries & Trades
Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy ; vol. 8