Optimal shutdown control of nuclear reactors /

Inaccurate reactor water level indication and inadvertent draindown during shutdown.
Published: (1996)

Inadequate shutdown margins.
Published: (1984)

Partial bypass of shutdown cooling flow from the reactor vessel.
Published: (1996)

Potential loss of required shutdown margin during refueling operations.
Published: (1989)

Inadvertent control rod withdrawal event while shutdown.
Published: (2010)

Potential for loss of shutdown cooling while at low reactor coolant levels.
Published: (1990)

Outage planning and scheduling--impacts on risk.
Published: (2005)

Inadvertent reduction in primary coolant inventory in boiling water reactors during shutdown and startup.
Published: (1984)

Undetected accumulation of gas in reactor coolant system and inaccurate reactor water level indication during shutdown.
Published: (1996)

Recent operating experience on loss of reactor coolant inventory while In a shutdown condition.
Published: (1990)

Turbine overspeed and reactor cooldown during shutdown evaluation.
Published: (1994)

Operational issues identified in boiling water reactor trip and transient.
Published: (2000)

Unrecognized reactivity addition during plant shutdown.
Published: (1997)

Optimal shutdown control of nuclear reactors.
by: Ash, Milton S.
Published: (1966)

Reactor trip followed by unexpected events.
Published: (1994)

Failure of remote shutdown system instrumentation because of incorrectly installed components.
Published: (1991)

Credit for control rods without scram capability in the calculation of the shutdown margin.
Published: (1989)

Degradation of residual heat removal (RHR) system.
Published: (1981)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

Safe shutdown potentially challenged by unanalyzed internal flooding events and inadequate design.
Published: (2005)

Failure to ensure that post-fire shutdown procedures can be performed.
Published: (2010)

Loss of reactor coolant inventory and associated potential for loss of emergency mitigation functions while in a shutdown condition.
Published: (1998)

Effects of crud buildup and boron deposition on power distribution and shutdown margin.
Published: (1997)

inadvertent reactor trip and partial safety injection actuation due to tin whisker.
Published: (2005)

Actuation of ECCS in the recirculation mode while in hot shutdown.
Published: (1980)

Potential for loss of remote shutdown capability during a control room fire.
Published: (1992)

Risk impact study regarding maintenance during low-power operation and shutdown.
Published: (1995)

Potential loss of safe shutdown equipment due to premature silicon controlled rectifier failure.
Published: (1988)

Shutdown order issued because licensed operators asleep while on duty.
Published: (1987)

Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)

Level instrumentation inaccuracies observed during normal plant depressurization.
Published: (1993)

Physics of nuclear reactors /
Published: (2021)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Loss of reactor coolant inventory and potential loss of emergency mitigation functions while in a shutdown condition.
Published: (1995)

Nuclear reactor kinetics and control /
by: Lewins, Jeffery
Published: (1978)

Nuclear reactor kinetics and control /
by: Lewins, Jeffery
Published: (1978)