http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
1 online resource (xxi, 870 pages) : illustrations
This handbook was written for the injection molding product designer who has a limited knowledge of engineering polymers. It is a guide for the designer to decide which resin and design geometries to use for the design of plastic parts. It can also offer knowledgeable advice for resin and machine selection and processing parameters. Manufacturer and end user satisfaction is the ultimate goal. This book is an indispensable, all inclusive, reference guide. New illustrations, graphs and equations have been included to provide additional clarity for complex ideas.
Intro -- Dedication -- Preface -- Contents -- 1 Polymeric Materials -- 1.1 Introduction to Plastic Materials -- 1.1.1 Beginning of Plastics -- 1.1.2 Polymer Families -- 1.2 Thermoplastic Polymers -- 1.2.1 Classification of Polymers by Performance -- 1.2.2 Molecular Structure of Plastic Materials -- 1.2.3 Acrylonitrile-Butadiene-Styrene (ABS) -- 1.2.4 Acetal (POM, Polyacetal) -- 1.2.5 Polymethyl Metacrylate (Acrylic, PMMA) -- 1.2.6 High Temperature Nylon (HTN) -- 1.2.7 Ionomer Polymers -- 1.2.8 Liquid Crystal Polymer (LCP) -- 1.2.9 Polyamide (PA, Nylon) -- 1.2.10 Polyetherimide (PEI)
1.2.11 Polyarylate (PAR) -- 1.2.12 Polyetherether Ketone (PEEK) -- 1.2.13 Polycarbonate (PC) -- 1.2.14 Modified Polyphenylene Oxide (PPO) -- 1.2.15 Polybutylene Terephthalate (PBT) -- 1.2.16 Polyethylene Terephthalate (PET) -- 1.2.17 Polyethylene (PE) -- 1.2.18 Polytetrafluoroethylene (PTFE) -- 1.2.19 Polyphenylene Sulfi de (PPS) -- 1.2.20 Polypropylene (PP) -- 1.2.21 Polystyrene (PS) -- 1.2.22 Polysulfone (PSU) -- 1.2.23 Polyvinyl Chloride (PVC) -- 1.2.24 Styrene Acrylonitrile (SAN) -- 1.3 Thermoplastic Elastomers (TPE) -- 1.3.1 Thermoplastic Elastomer Families
1.3.2 Thermoplastic Polyurethane Elastomer (TPU) -- 1.3.3 Styrenic Block Copolymer (SBS) -- 1.3.4 Polyolefin Thermoplastic Elastomer (TPO) -- 1.3.5 Elastomeric Alloy Thermoplastic Vulcanized (TPV). -- 1.3.6 Melt Processible Rubber (MPR) -- 1.3.7 Copolyester Thermoplastic Elastomer -- 1.3.8 Polyamide Thermoplastic Elastomer -- 1.4 Liquid Injection Molding Silicone (LIM®) -- 1.4.1 LIM® Silicone Processing -- 1.5 Thermoset Polymers -- 1.5.1 Polyester Alkyd (PAK) -- 1.5.2 Diallyl Phthalate/Isophthalate (DAP, DAIP) -- 1.5.3 Melamine Formaldehyde (MF) -- 1.5.4 Cellulosic Ester -- 1.5.5 Cyanate
1.5.6 Epoxy (EP) -- 1.5.7 Phenol Formaldehyde (Phenolic, PF) -- 1.5.8 Polybutadiene (PB) -- 1.5.9 Bismaleimide (BMI) -- 1.5.10 Unsaturated Polyester (UP) -- 1.5.11 Polyimide (PI) -- 1.5.12 Polyxylene -- 1.5.13 Polyurethane (PUR) -- 1.5.14 Silicone (SI) -- 1.5.15 Urethane Hybrid -- 1.5.16 Vinyl Ester (BPA) -- 2 Engineering Product Design -- 2.1 Understanding the Properties of Materials -- 2.1.1 Plastics Selection Guidelines -- 2.2 Structural Design of Thermoplastic Components -- 2.2.1 Stress-Strain Behavior -- 2.2.2 Tensile Testing of Viscoelastic Materials
Master and use copy. Digital master created according to Benchmark for Faithful Digital Reproductions of Monographs and Serials, Version 1. Digital Library Federation, December 2002. http://purl.oclc.org/DLF/benchrepro0212 MiAaHDL
digitized 2010 HathiTrust Digital Library committed to preserve pda MiAaHDL
Munich : Hanser Publishers ; Cincinnati : Hanser Gardner Publications, ©2006