http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Handbook of conveying and handling of particulate solids
1 online resource (x, 860 pages) : illustrations.
This handbook presents comprehensive coverage of the technology for conveying and handling particulate solids. Each chapter covers a different topic and contains both fundamentals and applications. Usually, each chapter, or a topic within a chapter, starts with one of the review papers. Chapter 1 covers the characterization of the particulate materials. Chapter 2 covers the behaviour of particulate materials during storage, and presents recent developments in storage and feeders design and performance. Chapter 3 presents fundamental studies of particulate flow, while Chapters 4 and 5 present transport solutions, and the pitfalls of pneumatic, slurry, and capsule conveying. Chapters 6, 7 and 8 cover both the fundamentals and development of processes for particulate solids, starting from fluidisation and drying, segregation and mixing, and size-reduction and enlargement. Chapter 9 presents environmental aspects and the classification of the particulate materials after they have been handled by one of the above-mentioned processes. Finally, Chapter 10 covers applications and developments of measurement techniques that are the heart of the analysis of any conveying or handling system.
Solids flowability measurement and interpretation in industry / T.A. Bell -- Flow properties of bulk solids : which properties for which application / J. Schwedes -- Investigation on the effect of filling procedures on testing of flow properties by means of a uniaxial tester / G.G. Enstad and K.N. Sjoelyst -- Characterization of powder flow behavior with the flexible wall biaxial tester / R.J.M. Janssen and B. Scarlett -- From discrete element simulations towards a continuum description of particulate solids / S. Luding, M. Lätzel and H.J. Herrmann -- Vibrational flow of cohesive powders / Th. Kollmann and J. Tomas -- Influence of the stress history on the time dependent behaviour of bulk solids / H. Zetzener and J. Schwedes -- Evaluation of the mechanical properties of powder for storage / M. Lubert, A. de Ryck and J.A. Dodds -- Particle adhesion and powder flow behaviour / J. Tomas -- Determination of the influence of surface coating and particle size on flow properties of organic pigment powders / P. Marjanovic, M. McGarvey and R.B. McKay -- The conversion of the analytical simple shear model for the Jenike failure locus into principal stress space and implication of the model for hopper design / A.H. Birks, M.S.A. Bradley and R. Farnish -- Modelling flooding in a small vessel compared with experiments and numerical calculation / S. Kuchii and Y. Tomita -- Analysis and application of powder compaction diagrams / P. Mort -- Axial porosity distribution in a packed bed of deformable particles : a numerical study based on DEM / Q. Li, V. Rudolph, F. Wang, S-I. Kajikawa and M. Horio -- Flow properties of bulk solids and their use in solving industrial problems / J. Schwedes -- Silo failures : case histories and lessons learned / John W. Carson -- The relationship between flow behaviour in a plane flow hopper and the Jenike design method / R.J. Berry, A.H. Birks, M.S.A. Bradley and R.J. Farnish -- Full scale silo tests and numerical simulations of the "cone in cone" concept for mass flow / Th. Schurich, Ch. Fürll and G.G. Enstad -- Stress condition of sliding bulk solids on silo walls / T. Yahiro -- Studies on thermal actions and forces in cylindrical storage silo bins / A. Lapko and J.A. Prusiel -- Silo discharge : dynamic effects of granular flow / J.-U. Böhrnsen and H. Antes -- Recent developments in feeder design and performance / A.W. Roberts -- Recent developments in belt conveying : bulk solid and conveyor belt interactions / A.W. Roberts -- Putting the pedal to the metal / G. Lodewijks, S. Kubo and A. Newman -- Mesoscopic nature of granular flows / I. Goldhirsch -- Using a kinetic theory approach incorporating interaction with the air to model granular flow down a chute / Y.H. Zhang and J.M. Reese -- Numerical and experimental studies for the impact of projectiles on granular materials / K. Tanaka, M. Nishida, T. Kunimochi and T. Takagi -- Implementation of 3D frictional contact condition / M. Klisinski and E. Postek -- Numerical simulation of 3D iron ore flow / E. Postek and M. Klisinski -- Pneumatic conveying : transport solutions, pitfalls, and measurements / G.E. Klinzing -- Dilute-phase pneumatic conveying problems and solutions / P.W. Wypych -- Latest development of the direct technique for measurement of the pneumatic conveying characteristics of bulk materials / M.S.A. Bradley, L.M. Hyder, R.J. Farnish and A.R. Reed -- Dense phase (plug) conveying : observations and projections / G.E. Klinzing -- Operating limits of low-velocity pneumatic conveying / J. Yi and P.W. Wypych -- Granular jump in low velocity pneumatic conveying of solid particles in a horizontal pipeline / Y. Tomita, K. Funatsu and S. Harada -- Two-layer model for non-suspension gas-solids flow of fine powders in pipes / D.J. Mason and A. Levy -- Pressure drop prediction of low-velocity slug-flow materials in the unstable zone / R Pan and P.W. Wypych -- Transportation boundaries for horizontal slug-flow pneumatic conveying / D.B. Hastie, R Pan, P.W. Wypych and P.R. Guiney -- The use of high pressure blow tanks for the pneumatic conveying of pelletised materials / David Mills -- Pneumatic conveying with Turbuflow-advantages against conventional dense phase conveying / M. Geweke and U. Gade -- The influence of a bend on the flow characteristics in pneumatic conveying systems / A. Levy -- A novel analytical model for the acceleration of particles following bends in pneumatic conveying systems / M.S.A. Bradley, R.J. Farnish, L.M. Hyder and A.R. Reed -- The design of pipeline systems for transporting ice into deep mines / T.J. Sheer, R. Ramsden and M. Butterworth -- Experimental studies on pneumatic conveying of wet snow / T. Kobayashi and Y. Nohguchi -- Deposition velocities for slurry flows / C.A. Shook and R.J. Sumner -- Particle motion in sheared non-Newtonian media / K.C. Wilson -- Distribution and friction of particles in pipeline flow of sand-water mixtures / V. Matoušek -- Laminar and turbulent flow of dense kaolin and ash hydromixtures / P. Vlasak and Z. Chara -- Rheological characterization of industrial kaolin slurries / A. de Pretis, A. Papo and L. Piani -- Net positive suction head requirement for centrifugal slurry pumps / L. Whitlock, A. Sellgren and K. Wilson -- Slurry and tip clearance effects on the performance of an open impeller centrifugal pump / T. Engin, M. Gur and I. Calli -- Pneumatic capsule pipelines in Japan and future developments / Sanai Kosugi -- Drag reduction in hydraulic capsule pipeline / T.R. Marrero and G.S. Kuhlman -- A contribution to hydrotransport of capsules in bend and inclined pipeline sections / P. Vlasak and V. Berman -- Recent developments in the drying technologies for the production of particulate materials / A.S. Mujumdar -- DEM simulation of industrial issues in fluidized bed reactors / M. Horio and S. Kajikawa -- Rheologic and flow properties of fluidised bulk solids / L. Kósa and A. Verba -- Drying kinetics simulation by means of artificial neural networks / E. Tomczak and W. Kaminski -- Production of powder-like material from suspension by drying on inert particles / A. Szalay, E. Pallai and T. Szentmarjay -- Segregation of powders : mechanisms, processes and counteraction / G.G. Enstad -- Countering segregation / L. Bates -- An investigation of degradation and segregation in typical coal handling processes / D. McGlinchey, P. Marjanovic and M.G. Jones -- A system for the reduction of air current segregation in silos / Are Dyrøy, Morten Karlsen, Gisle G. Enstad and Sunil de Silva -- Segregation-free particle mixing / J. Gyenis -- Bulk-solids mixing : overview / L.T. Fan -- A double stochastic model of the mixing of solid particles / Cs. Mihálykó and É.O. Mihálykó -- Investigation of flow regimes in continuous mixer tubes / J. Szépvölgyi Jr. and S. Endoh -- Description of grinding in a ball mill using statistical moments / A. Heim and T. Olejnik -- A Markov chain model to describe the residence time distribution in a stirred bead mill / H. Berthiaux, F. Espitalier, J.C. Kiefer, M. Niel and V.E. Mizonov -- Simulation of interaction of opposed gas-particle jets / S. Voropayev, D. Eskin, O. Vasilkov and I. Dorokhov -- Simulation of gas-particle flows in jet-vortex mills / D. Eskin and S. Voropayev -- Contribution to the theory of roll press design / M. Hubert, A. Molnár and I. Jaššo -- Drum granulation conditions for raw material with different particle size distributions / T. Gluba -- Fugitive and non-fugitive dust generation and control in conveying of powders : reality, technology and human attitude / M.E. Fayed -- Evaluation of air pollution level by means of artificial neural network : multilayer perceptron / W. Kaminski -- Dust explosion hazard considerations for materials handling plants / P.W. Wypych -- A de-dusting device for removing fines from pellets and granules / S.R. de Silva and F.O. von Hafenbrädl -- Assessment of a multistage gravity separation in turbulent air flow / J. Tomas and T. Gröger -- TriboMechanical classification : a new technology for size classification of bulk powders / B. Eiderman, R. Asimow, M. Voskoboinik and H.K. Levy -- Particle surface inspection with Fourier-wavelets transform / M. Takei, H. Li, M. Ochi, Y. Saito and K. Horii -- The crucial role of on-line measurement in bulk solids handling / J.R.
Pugh -- Application of non-invasive techniques for imaging fluidized beds : a review / T. Dyakowski and A.J. Jaworski -- Electrical tomography techniques for multiphase flow applications / R.C. Waterfall, W.W. Loh, Arko, J. Cory and G.P. Lucas -- Sedimentation kinetics monitor / D. Kamugasha and H. Mahgerefteh -- Effect of mass loading on gas-solids motion and particle segregation patterns / E.N. Jones, C.U. Yurteri and J.L. Sinclair -- Measurement of the dynamic behavior of bulk solids using optical flow analysis / Michael Ostendorf and Jörg Schwedes.
Master and use copy. Digital master created according to Benchmark for Faithful Digital Reproductions of Monographs and Serials, Version 1. Digital Library Federation, December 2002. http://purl.oclc.org/DLF/benchrepro0212 MiAaHDL
digitized 2010 HathiTrust Digital Library committed to preserve pda MiAaHDL
126419:127352 Elsevier Science & Technology