http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Advanced processing and manufacturing technologies for structural and multifunctional materials III
a collection of papers presented at the 33rd International Conference on Advanced Ceramics and Composites, January 18-23, 2009 Daytona Beach, Florida
Advanced processing and manufacturing technologies for structural and multifunctional materials 3
International Conference on Advanced Ceramics and Composites 2009 : Daytona Beach, Fla.)
International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems 2009 : Daytona Beach, Fla.)
Solid-state reactive sintering of polycrystalline Nd:YAG ceramic laser host materials using an 83 GHz millimeter wave system / Ralph W. Bruce ... [et al.] -- Microwave assisted large scale sintering of multilayer electroceramic devices / B. Vaidhyanathan ... [et al.] -- Influence of the secondary phase composition on the microwave sintering process / Masaki Yasuoka, Takashi Shirai, and Koji Watari -- Optimization of microwave-assisted rapid debinding of CIM parts in multi-mode applicators / Roberto Rosa, Paolo Veronesi, and Cristina Leonelli -- Characterization of a potential superplastic zirconia-spinel nanocomposite processed by spark plasma sintering / Mahmood Shirooyeh ... [et al.] -- Densification enhancement of alumina by sandwich process design / Osayande L. Ighodaro, Okenwa I. Okoli, and Ben Wang -- Processing factors involved in sintering [beta]-Si₃N₄-based ceramics in an air atmosphere furnace / Kevin P. Plucknett -- Pressureless sintering of boron carbide in an Ar atmosphere containing gaseous metal species / Hiroyuki Miyazaki ... [et al.] -- Processing strategy for producing ultra-highly porous cordierite / Manabu Fukushima, Masayuki Nakata and Yu-ichi Yoshizawa -- Issues in the synthesis and fabrication of refractory carbides, borides, silicides and their mixtures / A.K. Suri, N. Krishnamurthy, and C. Subramanian -- Shrinkage reduction of clay through addition of alumina / K. Hbaieb -- ITO thin film coatings obtained from developed ceramic rotary sputtering targets / E. Medvedovski ... [et al.] -- Ultrasonic non-destructive testing of ceramic sputtering targets / Eugene Medvedovski and Christopher J. Szepesi -- Morphology control of metal oxides for environmental sensors / Yoshitake Masuda ... [et al.] -- Basic study of joint interface formation in magnetic pressure seam welding / Hisashi Serizawa ... [et al.] -- Joining of silicon nitride by slurry or paste / Naoki Kondon, Hideki Hyuga, and Hideki Kita -- Segregation mechanism in (M=Al, Ga) Zn[subscript x-1]M[subscript x]O ceramics and its influence on the thermoelectric properties / J.P. Wiff, Y. Kinemuchi, and K. Watari -- Production of novel architectures through controlled degradation of electrospun precursors / Satya Shivkumar and Xiaoshu Dai -- Millimeter wave properties of titania photonic crystals with diamond structures fabricated by using micro-stereolithography / M. Kaneko and S. Kirihara -- Sintering kinetic study of 2Y-TZP/Al₂O₃ composite during initial stage of sintering / Abhijit Ghosh ... [et al.] -- Investigations of phenolic resins as carbon precursors for C-fiber reinforced composites / H. Mucha, B. Wielage, and W. Krenkel -- Aluminum nitride multi-walled nanotube (MWNTs) nanocomposite by direct in-situ growth of CNTs on aluminum nitride particles / Amit Datye ... [et al.] -- Microstructural characterization of C/C-SiC composites after oxidation with oxyacetylene gas in open atmosphere / V.K. Srivastava and Shraddha Singh -- The effect of interparticle interaction son the rheological properties of paraffin-wax suspensions / Aleš Dakskobler and Tomaž Kosmač -- Preparation of highly concentrated nanosized alumina suspensions for spray-drying / S. Cottrino, J. Adrien and Y. Jorand.
edited by Tatsuki Ohji, Mrityunjay Singh ; volume editors, Dileep Singh, Jonathan Salem.
"The 3rd International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials (APMT) was held during the 33rd International Conference on Advanced Ceramics and Composites, in Daytona Beach, FL January 18-23, 2008 [ie. 2009]"--P. ix.
Includes bibliographical references and index.
International Conference on Advanced Ceramics and Composites (33rd : 2009 : Daytona Beach, Fla.).
Hoboken, N.J. : Wiley ; [Chichester : John Wiley, distributor], c2010
Ceramic engineering and science proceedings ; v. 30, no. 8