http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures
21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures
Conference on Composites, Advanced Ceramics, Materials, and Structures
Composites, advanced ceramics, materials, and structures
Conference on Composites, Advanced Ceramic Materials, and Structures 1997 : Cocoa Beach, Fla.)
1 online resource (2 online resources) : illustrations
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
[pt. A/no. 3]. High temperature structural silicides / John J. Petrovic -- Advanced ceramics in the U.S. for the 21st century : prospects and challenges / Stephen W. Freiman, George Y. Onoda Jr. -- Synthesis and characterization of mullite and YAG fibers grown from deeply undercooled melts / Dong Zhu, Mohammad H. Jilavi, Waltraud M. Kriven -- Solar reflector coatings for space applications / Yoshiro Harada, Mukund Deshpande -- Passivation of inner surfaces of chemical process reactor tubes by chemical vapor deposition / Terence J. Clark -- Synthesis and thermal stability of a Si-N-(O) fiber / Ulrich Vogt, Georg Chollon, Karl Berroth -- Fabrication and mechanical properties of polymer melt spun yttrium aluminum garnet (YAG) fiber / Dragan Popovich, John L. Lombardi, Bruce H. King -- Scaling technogy for production of continuous ceramic fiber / J.J. Biernacki -- Piezoelectric fibers produced by the fibrous monolith technique / Gene A. Danko, Dragan Popovich, Fatih Dogan -- Creep and subcritical crack growth of Nextel 720 alumino silicate fibers as received and after heat treatment at 1300°C / J. Göring, H. Schneider -- Microstructure and interfacial properties of laser ablation coated, fiber-reinforced ceramic composite / Dong Zhu, Helen Chung, Mohammad H. Jilavi, Waltraud M. Kriven -- Thermal stability and chemical corrosion resistance of newly developed continuous Si-Zr-C-O Tyranno fiber / Kiyoshi Kumagawa, Hiroyuki Yamaoka, Masaki Shibuya, Takemi Yamamura -- On the statistical strength of Nicalon fibers and its characterization / Yuntian T. Zhu, Seth T. Taylor, Michael G. Stout, Darryl P. Butt, William R. Blumenthal, Terry C. Lowe -- Polymer architecture and crystallization behavior of SiCN-fiber precursors / D. Suttor, J. Hacker, S. Trassl, H. Müller, H.-J. Kleebe, G. Ziegler -- High temperature contraction behavior of polymer-derived SiC fibers / Hee Mann Yun, James A. Dicarlo -- Structure and properties of Sylramic silicon carbide fiber : a polycrystalline, stoichiometric [beta]-SiC composition / J. Lipowitz, J.A. Rabe, A. Zangvil, Y. Xu -- Joining of silicon carbide based ceramics by reaction forming approach / M. Singh -- Electrically insulating joining of carbon-carbon composites for high temperature applications / Liang A. Xue -- oining ceramic composites using active metal/HPCS preceramic polymer slurries / W.J. Sherwood, C.K. Whitmarsh, J.M. Jacobs, L.V. Interrante -- Intra-granular strengthening and toughening by brittle nanoparticles in ceramic nanocomposites / Tatsuki Ohji -- Thermal shock resistance of mullite and mullite-ZrO₂-SiC-whisker composites / William H. Kelly, Anthony N. Palazotto, Robert Ruh, Jonas K. Heuer, Avigdor Zangvil -- Grain size control and phase transformations in nanophase Al₂O₃-ZrO₂ / Bridget M. Smyser, Jane F. Connelly, Richard D. Sisson Jr., Virgil Provenzano -- Fracture toughness and reliability of Si₃N₄ whisker-reinforced Si₃N₄ ceramics / Célio A. Costa, Judith A. Todd -- Sinter-plus-HIPing of zirconia and zirconia-toughened alumina (ZTA) ceramic matrix composites / A.G. Solomah -- Spark-erosion process effects on the properties and performance of a TiB₂ particulate-reinforced/SiC matrix ceramic composite / M. Ramulu, M.G. Jenkins, J.A. Daigneault -- Solid-particle erosion of an Al₂O₃-SiC-TiC composite / Ming Jiang, K.C. Goretta, Dileep Singh, J.L. Routbort -- Fractal analysis of a multilayered composite DCB specimen / J. Cuneo, Z. Chen, J.J. Mecholsky Jr., T.L. Jessen -- Stress relaxation around crack tip in ceramic composites / Hidenari Baba, Seijiro Hayashi, Akihiko Suzuki -- Characterization of grain-boundary fracture in ceramics / T. Nishida, K. Maruyama, N. Muraki, H.-J. Kleebe, G. Pezzotti -- Monazite interface coatings in polymer and sol-gel derived ceramic matrix composites / A. Cazzato, M. Colby, D. Daws, J. Davis, P. Morgan, J. Porter, S. Butner, B. Jurf -- Isotropic complex oxides as fiber coatings for oxide-oxide CFCC / Richard W. Goettler, Sankar Sambasivan, Vinayak P. Dravid -- Liquid MOCVD precursors and their application to fiber interface coatings / Paul V. Chayka -- Microstructural characterization of a 2-D woven Nicalon/SiC ceramic composite by scanning electron microscopy line-scan technique / Wei Zhao, Peter K. Liaw, David C. Joy -- Effect of the surface structure of Si-Ti-C-O fiber on the properties of 3-dimensional fiber reinforced silicon carbide composites / T. Tanaka, N. Tamari, I. Kondo, M. Iwasa -- Evaluation of fibre-matrix interfacial strength in a SiC fibre-reinforced Ti-6Al-4V composite / R. Berriche, P. Saxena, A.K. Koul, J. Beddoes -- The characterisation and properties of coatings on high volume fraction metal matrix composites / S.M. Nuttall, P.M. Mummery, R.M.K. Young -- Microstructure and mechanical properties for alumina/copper nanocomposites / Sung-Tag Oh, Tohru Sekino, Koichi Niihara -- Studies of NbC-WC solid solution-graphite composites / Yoshiro Harada, Mukund Deshpande -- The role of crack morphology on the failure behavior of laminated composites / S.B. Biner -- Mechanical performance of multi-layered silicon nitride / Tatsuki Ohji, Kiyoshi Hirao, Shuzo Kanzaki -- Effects of oil degradation on the friction and wear properties of silicon nitride/M-50 steel sliding couples / Robert Sabia, David Mitchell, James H. Adair -- Alumina woven fibre-reinforced composites produced by directed melt oxidation / X. Gu, E.G. Butler -- Effects of interface modification on mechanical behavior of Hi-Nicalon fiber-reinforced celsian matrix composites / Narottam R Bansal, Jeffrey I. Eldridge -- Processing and performance of CFCCs using vacuum assisted resin transfer molding and Blackglas preceramic polymer pyrolysis / M.N. Ghaseminejhad, Jocelyn K. Bayliss, R. Leung, J.G. Sikonia -- Effects of lamina stacking sequence on the in-plane elastic stress distribution of a plain-weave Nicalon fiber reinforced SiC laminated composite with a lay-up of [0/30/60] / Wei Zhao, Peter K. Liaw, Niann-I Yu -- Fabrication and properties of SiC/SiC composites derived from Ceraset SN preceramic polymer / David V. Miller, Donald L. Pommell, Gerhard H. Schiroky -- Fabrication and mechanical properties of reaction sintered silicon carbide matrix composite / T. Kameda, A. Sayano, N. Amiji, H. Ichikawa, H. Hamada, A. Fujita, T. Uozumi -- Structure and characterization of SiC matrix composite via slurry and pulse CVI joint process / K. Suzuki, K. Nakano -- Redistribution of internal stresses in composites : an approach for increasing the matrix cracking stress / Edgar Lara-Curzio, Christiana M. Russ -- Modeling strength degradation of hypervelocity impacted windows for the space shuttle / G.-Q. Zhu, J.E. Ritter, K. Jakus -- Multiaxial internal variable modeling of the creep deformation and fracture of an advanced silicon nitride / R.M. Hazime, C.S. White -- An analysis of creep crack growth of interface cracks in layered/graded materials / S.B. Biner -- Prediction of SiAlON diesel valve failure probability using Allied Signal's ceramic and Erica life prediction codes / A.A. Wereszczak, T.P. Kirkland, M.K. Ferber, M.J. Andrews -- Numerical modeling of the mechanical response of a continuous fiber ceramic composite in flexure / K.Y. Mark, M.G. Jenkins -- Error in flexure testing of advanced ceramics under cyclic loading / Sung R. Choi -- Fracture in unidirectional off-axis ceramic matrix composite / Alex S. Selvarathinam, Y.J. Weitsman.
Effects of coal slag corrosion on the mechanical properties of sintered [alpha]-silicon carbide / Sophie E. Hannel, Kristin Breder, Debra L. Joslin -- Environmental durability of BN-based interphases (for SiCf/SiCm composites) in H₂O containing atmospheres at intermediate temperatures / G.N. Morscher, D.R. Bryant, R.E. Tressler -- Silicon nitride at very high temperatures : bubble and pit formation / K.G. Nickel, E. Butchereit -- Stressed oxidation of C/SiC composites / Michael C. Halbig, David N. Brewer, Andrew J. Eckel, James D. Cawley -- Thermal-mechanical fatigue of fiber-reinforced ceramics / David J. Weinberg, Frank K. Myers, John W. Holmes -- Processing and oxidation behavior of Y₅Si₃ / J. Williams, M. Akine -- The effect of neutron irradiation on silicon carbide fibers / G.A. Newsome -- Effect of irradiation on thermal expansion of SiCf/SiC composites / D.J. Senor, D.J. Trimble, G.A. Newsome, J.J. Woods -- Oxidation and hot corrosion of Dupont Lanxide enhanced SiC/SiC and HITCO SiC/C Composites / George Y. Richardson, Robert W. Kowalik -- Fabrication and properties of quasi-isotropic silicon nitride-boron nitride fibrous monoliths / Gene A. Danko, Gregory E. Hilmas, John W. Halloran, Bruce King -- Silicon nitride composites materials with an improved high temperature oxidation resistance / Hagen Klemm, Mathias Herrmann, Christian Schubert -- Selective material characterisation of ceramic matrix composites for advanced gas turbines / K. Iffländer, G.C. Gualco, F. Rosatelli, S. Hampshire, E.H. Van Brug, A. Ferrière, G.P. Rodriguez, R.J. Fordham, P. Dupel, N. Mason, M. Nedele -- The behavior of two Si3N₄ and two SiC ceramics subject to oxidation environments / H.S. Rho, N.L. Hecht, G.A. Graves -- Prediction of the oxidation behaviour of carbon fibre-based high temperature composites for hypersonic flight and power generation / K. Iffländer, K. Keller -- Hypervelocity micrometeorite damage in fused silica space shuttle windows / J. Lankford, K. Edelstein, Lyndon B. Johnson -- Effects of material removal process on the high-temperature performance of an oxide-matrix CFCC / K.R. Fehlmann, M.G. Jenkins -- Creep behavior of compositionally varied Si/SiC composites / Hong Zhou, James E. Webb, Raj N. Singh -- High-temperature load transfer in Nicalon/BMAS glass-ceramic matrix composites / Sujanto Widjaja, Karl Jakus, John E. Ritter, Edgar Lara-Curzio, Ellen Y. Sun, Thomas R. Watkins, John J. Brennan -- The effect of high temperature on the microstructure and properties of Nicalon-reinforced zirconium phosphate composites / Barry A. Bender, Roy J. Rayne, Todd L. Jessen, Scott Browning -- Effect of fiber architecture on mechanical behavior of SiC(f)/SiC composites / Dileep Singh, Jitendra P. Singh, Manish Sutaria -- Development of engineered inhomogeneities for mechanical behavior studies of unidirectional CFCMCs / Todd L. Jessen, Victor A. Greenhut, Barry A. Bender -- Thermal-shock behavior of advanced ceramic/composite hot-gas filters / J.P. Singh, M. Sutaria, W. Bielke -- Tensile tests of miniature fiber reinforced ceramic composites for screening process-property relations / S.T. Gonczy, R.C. Sprandel, K.T. Faber -- The effect of static and cyclic tensile stress and temperature on failure for precracked Hi-Nicalon/BN/CVD SiC minicomposites in air / Gregory N. Morscher -- The monotonic and fatigue behavior of a Nicalon/alumina composite at ambient and elevated temperatures / N. Miriyala, P.K. Liaw, C.J. McHargue, L.L. Snead, J.A. Morrison -- Effect of abrasive wear on interfacial shear sliding resistance in SiC fiber-reinforced Al₂O₃ matrix composite / H. Kakisawa, Y. Kagawa -- Thermo-mechanical fatigue behavior of cross-ply ceramic matrix composite under tension-tension loading / D.G. Allen, S. Mall -- Structure and properties of Si-Ti-C-O fiber-bonded ceramics / Toshihiro Ishikawa, Shinji Kajii, Yasuhiko Kohtoku, Takemi Yamamura -- Some mechanical properties of SiC(Hi-Nicalon) fiber-reinforced SiC matrix Nicaloceram composites / M. Takeda, Y. Imai, H. Ichikawa, Y. Kagawa, H. Iba, H. Kakisawa -- Optmechanical fiber-reinforced glass matrix composite : fabrication and properties / H. Iba, T. Chang, Y. Kagawa.
[pt. B/no. 4]. Hot pressing analysis of ceramic powders with green density gradients / Sandeepan Bhattacharya, Karl Jakus, Ian Grosse -- Micro-gas turbine engine materials and structures / S.M. Spearing, K.S. Chen -- Superplasticity in silicon nitride / J.A. Schneider, A.K. Mukherjee -- Synthetic low-shrinkage oxide-matrices from filled polymeric siloxanes / D. Suttor, H.-J. Kleebe, G. Ziegler -- Fabrication and properties of erbium oxide / A. Neuman, M. Platero, R. Romero, K.J. McClellan, J.J. Petrovic -- Tensile creep performance of a developmental, in-situ reinforced silicon nitride / A.A. Wereszczak, T.P. Kirkland, H.-T. Lin, M.K. Ferber, C.-W. Li, J.A. Goldacker -- Interstitial chemistry effects on sintering of Ti₅Si₃ / Andrew J. Thom, Mufit Akinc -- Viscous slip at grain boundaries in highly covalent ceramics / G. Pezzotti, K. Maruyama, K. Ota, H.-J. Kleebe, T. Nishida -- Characterization of innovatively synthesized low cost NZP powders / J.A. Curtis, R. Nageswaran, S.Y. Limaye, C.R. Hubbard, W.D. Porter, S.T. Misture -- Characterizing the performance of advanced rolling element materials / D.J. Mitchell, R. Sabia, E.D. Whitney, J.H. Adair -- Characterization of machining-induced sub-surface damage of a high strength silicon nitride / R.D. Ott, K. Bredert, T.R. Watkins, M.K. Ferbert, J.M. Rigsbee -- Synthesis and microstructure of powder and porous ZrO₂ from hydrolysis process / Masakuni Ozawa, Suguru Suzuki, C.-K. Loong, P. Thiyagarajan -- Laminated object manufacturing, a new process for the direct manufacture of monolithic ceramics and continuous fiber CMCs / Don Klosterman, Richard Chartoff, Nora Osborne, George Graves -- The sintering effects of time, temperature, and ZNO additions on CMZP ceramics / J.R. Clarke, D.A. Hirschfeld -- Microstructure and mechanical evaluation of yttrium phosphate-containing and lanthanum phosphate-containing zirconia laminates / Dong-Hau Kuo, Waltraud M. Kriven -- Brazing of heat sink attachments for new electronic ceramic substrates / Wendy B. Hanson, John A. Fernie, Norman R. Stockham -- The use of compact tension specimens to measure slow crack growth in continuous-fiber composites at elevated temperatures / C.A. Lewinsohn, C.H. Henager Jr., R.H. Jones -- Fracture toughness of ceramics using the SEVNB method : preliminary results / Jakob Kübler -- Fracture toughness by the surface crack in flexure (SCF) method : new test results / George D. Quinn, Jeffrey J. Swab, Michael D. Hill -- Investigation of halos associated with fracture toughness precracks / Jeffrey J. Swab, George D. Quinn -- Micro-strength evaluation of alumina using biaxial flexure technique / A. Okada, H. Kawamoto, H. Usami -- Use of indentation technique to measure elastic modulus of plasma-sprayed zirconia thermal barrier coating / J.P. Singh, M. Sutaria, M. Ferber -- Gas evolution from advanced ceramics during fracture under ultra high vacuum / S. Kitaoka, H. Matsubara, H. Kawamoto, H. Yanagida, M. Matsumoto, M. Kanno -- Stress-rupture of Nicalon/SiC at intermediate temperatures / Edgar Lara-Curzio, P.F. Tortorelli, K.L. More -- Application of continuous fiber reinforced silicon carbide matrix composites to a ceramic gas turbine model for automobiles / Yutaka Sanokawa, Yasuji Ido, Yoshio Sohda, Norio Nakazawa, Hiroshi Kaya -- Testing of monolithic ceramics and fiber reinforced ceramic composites for gas turbine combustors / Jane F. Simpson, Vijay M. Parthasarathy, Anthony Fahme -- Shear strength and non-destructive evaluation of thermally shocked CFCC's / James E. Webb, Raj N. Singh, Peter B. Nagy, Richard A. Lowden -- Piezoelectric composite oscillator method for modulus and internal friction evaluation of ceramic / Masakuni Ozawa, Suguru Suzuki, Masahiko Inagaki -- A correlation of air-coupled ultrasonic and thermal diffusivity data for CFCC materials / T.A.K. Pillai, W.A. Ellingson, J.G. Sun, T.E. Easler, A. Szweda -- Magnetic resonance imaging of gel-cast ceramic composites / S.L. Dieckman, K.M. Balss, J.A. Jendrzejczyk, A.C. Raptis -- Three new nondestructive evaluation tools based on high flux neutron sources / Camden R. Hubbard, Dudley Raine, Roberta Peascoe, Michael Wright, Paul M. Whaley, Paul Koehler -- Laser-based optical scattering detection of surface and subsurface defects in machined Si₃N₄ components / J.G. Sun, M. Shirber, W.A. Ellingson -- Ultrashort laser pulse scattering by optmechanical composites for analysis of light-transmission / H. Iba, Y. Kagawa -- Nondestructive evaluation of Nicalon/Sic composites by ultrasonics and X-ray computed tomography / J. Kim, P.K. Liaw, D.K. Hsu, D.J. McGuire -- Mechanism-based design of composite structures program overview and accomplishments / George J. Dvorak -- Software framework for mechanism-based design of composite structures / R. Wentorf, M.S. Shephard, G.J. Dvorak, J. Fish, M.W. Beall, R. Collar, K.-L. Shek -- Modeling and adaptive numerical techniques for oxidation of ceramic composites / S. Adjerid, M. Aiffa, J.E. Flaherty, J.B. Hudson, M.S. Shephard -- Modeling and simulation of failure processes in composites / Jacob Fish, Kamlun Shek, Said Gomaa, Mark S. Shephard, George J. Dvorak, William E. Bachrach, Amr M. Wafa -- Dynamic and transient characterization of ceramic fibers at elevated temperatures / S.S. Sternstein, R. Warren -- Improved properties of silicide matrix composites / S. Augustin, M. Broglio, P. Lipetzky, N.S. Stoloff, M. Nazmy -- Multi-axial response of a woven continuous-fiber composite / P. Lipetzky, G.J. Dvorak, N.S. Stoloff -- Atmospheric effects on high-temperature lifetime of ceramic composites / P. Lipetzky, N.S. Stoloff, G.J. Dvorak -- Effect of salt corrosion on mechanical properties of a SiC-SiC composite in dry and moist high-temperature environment / P. Lipetzky, M. Lieblich, W. Hillig, D. Duquette -- Behavior of SiC-fiber/Al₂O₃ composite with Na-based salts in dry and moist oxidizing environments / P. Lipetzky, M. Lieblich, W. Hillig, D. Duquette.
The use of secondary ion mass spectrometry (SIMS) in the analysis of alumina-boria-silica ceramic / E.A. Leone, S.S. Campbell -- The effect of processing parameters on the surface nitridation of Nextel 312 ceramic / Scott Campbell, Edgar Leone, Mike McNallan -- Synthesis and thermal stability of nitrogen-containing Blackglas ceramic / Roger Y. Leung, Michael Glazier, Mary Ann Meador -- Development of mechanistic model for Blackglas pyrolysis : comparison of theory and experiment / W.N. Gill, A. Kulkarni, F. Wang, Y.W. Lee, J. Madsen, A. Tobin, T. Donnellan -- Characterization of Blackglas/BN/Nicalon composites / Gang Qi, W. Roger Cannon, Stephen C. Danforth -- Thermal wave nondestructive evaluation of ceramic matrix composite components / P. Khandelwal, S.M. Shepard, T. Ahmed -- Effect of powder characteristics on the [alpha]-to-[beta] Si₃N₄ transformation kinetics / T.N. Tiegs, F.C. Montgomery, J.L. Schroeder, D.L. Barker, P.A. Menchhofer -- Phase transformation and microstructure in the mixed cations of [alpha]/[beta]-SiAlON composite / Tzer-Shin Sheu -- Optimization of sintering aids in silicon nitrides for cutting tool application / R.D. Nixon, P.K. Mehrotra -- Porous silicon nitride with oriented anisotropic pores / Yasuhiro Shigegaki, Manuel E. Brito, Kiyoshi Hirao, Motohiro Toriyama, Shuzo Kanzaki -- The influence of carbon on the structure of preceramic polymer derived SiC / Lynne E. Kolaya, Nathan Lewis -- High temperature characteristics of Si₃N₄/BN fibrous monolithic ceramics / Shi Woo Lee, Do Kyung Kim -- Effect of sintering atmosphere on the microstructure evolution and mechanical properties of silicon carbide ceramics / Hyung-Woo Jun, Hae-Weon Lee, Gyeung-Ho Kim, Heu-Sup Song, Byung-Ho Kim -- Novel microstructure of microwave-sintered silicon nitride doped with Al₂O₃ and Y₂O₃ / Yoon Chang Kim, Do Kyung Kim, Chong Hee Kim, Kang Bai, Jun Whan Yang -- Correlation between microstructure and mechanical properties in silicon nitride ceramics / Hiroshi Hohjo, Nobuo Kamiya, Takashi Miyata -- Modelling of the sintering behaviour of Al₂O₃ with a neural network / H. Hofmann -- International Symposium on Advanced Synthesis and Processing : preface / Kathryn V. Logan, Zuhair A. Munir, Richard M. Spriggs -- Developments in microwave processing technologies / D.E. Clark, D.C. Folz -- Microwave joining and repair of ceramics and ceramic composites / Ki-Yong Lee, Eldon D. Case, Donnie Reinhard -- Microwave heating rates of silicon carbide/alumina cement susceptors / K.S. Leiser, R.R. Di Fiore, A.D. Cozzi, D.E. Clark -- Microwave induced reduction/oxidation of powders to form ceramic-metal composites / R.R. Di Fiore, D.E. Clark -- Shock synthesis of materials : effects of starting materials and shock conditions / Toshimori Sekine -- Shock reactive synthesis of refractory metal aluminides and silicides / Tatsuhiko Aizawa -- High-speed bulk mechanical alloying for solid-phase synthesis of fine-grained and exotic materials / Tatsuhiko Aizawa -- Bulk mechanical alloying of Co-Cu / Tatsuhiko Aizawa, Zhao Cheng, Kazuto Tokumitsu, Junji Kihara -- Efficient grinding of silicon nitride / Y. Nagano, M. Mizuno -- Effects of pre-existing silicon nitride in the direct nitridation process of liquid silicon / Tzer-Shin Sheu -- Titanium effects on sintering and grain boundary mobility of alumina / J.D. Powers, A.M. Glaeser -- Simultaneous combustion synthesis and densification of SiC, TiC, and SiC-TiC composites / B.M. Karwoski, D.W. Readey, J.J. Moore -- Controlled combustion synthesis in the Ti-B system / Z.X. Peng, S.B. Bhaduri -- Combustion synthesis of nanocrystalline powders in Al₂O₃-MgO binary system / S. Bhaduri, E. Zhou, S.B. Bhaduri -- Development of phases in combustion synthesized nanocrystalline-ZrO₂ / E. Zhou, S. Bhaduri, S.B. Bhaduri -- Preparation of nanocrystalline silicon nitride composite with nano-size particles of titanium nitride / Takashi Matsuura, Akira Yamakawa -- Fabrication and properties of Nano-Sized Bn-particulate-dispersed SiAlON ceramics / T. Mizutani, T. Kusunose, M. Sando, K. Niihara -- Preparation of mullite coated SiC particulates as precursors for mullite-SiC nanocomposites / U.S. Hareesh, G.M. Anilkumar, A.D. Damodaran, K.G.K. Warrier -- Potential of nanosized ceramic powder for functional applications / H. Hofinann, J. Dutta, S. Scholz-Odermatt, R. Vacassy, J.-Ch. Valmalette -- Synthesis of submicron [beta]-SiC powders / Sai V. Cattamanchi, Rasit Koc -- Kinetics and phase evolution during carbothermal synthesis of titanium carbide / Rasit Koc -- A novel non-oxide sol-gel process to Si-C-N ceramics / Andreas O. Gabriel, Ralf Riedel -- Recent advances in rapid vapor-phase densification of high-temperature fiber-matrix composites Ilan Golecki -- Manufacturing of plasma-sprayed graded structures / M.I. Mendelson -- The design of a piezoelectric based sensor for applications at high temperature / B.R. Jooste, S. Schroeder, H.J. Viljoen -- Hydrothermal synthesis of diamond : challenges and opportunities / Y.G. Gogotsi, K.G. Nickel -- Thermal diffusivity mapping of 4D carbon-carbon composites / H. Wang, R.B. Dinwiddie -- Characterization of tri-axially reinforced 3-D C/C composites / T. Ozaki, T. Honda.
Electronic reproduction. [Place of publication not identified] : HathiTrust Digital Library, 2011. MiAaHDL
Master and use copy. Digital master created according to Benchmark for Faithful Digital Reproductions of Monographs and Serials, Version 1. Digital Library Federation, December 2002. http://purl.oclc.org/DLF/benchrepro0212 MiAaHDL
digitized 2011 HathiTrust Digital Library committed to preserve pda MiAaHDL
Includes bibliographical references and indexes.
Conference on Composites, Advanced Ceramic Materials, and Structures (21st : 1997 : Cocoa Beach, Fla.).
Westerville, Ohio : American Ceramic Society, ©1997
Ceramic engineering and science proceedings ; v. 18, no. 3-4