http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
a unified approach to processing of metals, ceramics, and polymers
Materials Processing: A Unified Approach to Processing of Metals, Ceramics and Polymers, Second Edition is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles.
Intro -- Materials Processing: A Unified Approach to Processing of Metals,Ceramics and Polymers -- Copyright -- Dedicated to Mark and Carolyn -- Contents -- Preface and acknowledgments to the second edition -- Preface and acknowledgments to the first edition -- Chapter 1: Introduction to Materials Processing -- 1.1. Materials Processing: Definition and Scope -- 1.2. Three Approaches to Materials Processing -- 1.3. Materials Processing Steps -- 1.4. Processing of Metals -- 1.5. Processing of Ceramics -- 1.6. Processing of Polymers -- 1.7. Summary -- Cited References -- Bibliography and Recommended Reading -- Chapter 2: Starting Materials -- 2.1. What Is a Starting Material? -- 2.2. Metals -- 2.2.1. Introduction -- 2.2.2. Bulk Metal Starting Materials -- 2.2.3. Metal Powder Starting Materials -- 2.3. Ceramics -- 2.3.1. Introduction -- 2.3.2. Ceramic Powder Starting Materials -- 2.3.3. Glass Starting Materials -- 2.4. Polymers -- 2.4.1. Introduction -- 2.4.2. Thermoplastic Polymer Starting Materials -- 2.4.3. Thermoset Polymer Starting Materials -- 2.5. Summary -- Questions and Problems -- Questions -- Problems -- Cited References -- Bibliography and Recommended Reading -- 2.2 Metals -- 2.3 Ceramics -- 2.4 Polymers -- Chapter 3: Melt Processes -- 3.1. Introduction -- 3.2. Fundamentals -- 3.2.1. Melt Structure and Surface Tension -- 3.2.2. Melt Rheology -- 3.2.3. Flow Fundamentals -- 3.2.4. Heat Transfer Fundamentals -- 3.2.5. Solidification -- 3.3. Metal Melt Shape Casting -- 3.3.1. Process Overview -- 3.3.2. Metal Melt Preparation -- 3.3.3. Sand Casting -- 3.3.4. Permanent Mold Casting -- 3.3.5. Die Casting -- 3.3.6. Postprocessing of Cast Metal Parts -- 3.4. Melt Casting of Flat Glass Sheets -- 3.4.1. Process Overview -- 3.4.2. Glass Melt Preparation -- 3.4.3. Float Glass Process -- 3.4.4. Fusion Downdraw Process.
3.4.5. Postprocessing Operations for Glass Sheets -- 3.5. Polymer Extrusion -- 3.5.1. Process Overview -- 3.5.2. Melting and Flow in a Single Screw Extruder -- 3.5.3. Die Flow -- 3.5.4. Single Screw Extruder Operating Diagram -- 3.5.5. Twin Screw Extrusion -- 3.5.6. Die Exit Effects -- 3.5.7. Extruded Products and Solidification -- 3.6. Polymer Injection Molding -- 3.6.1. Process Overview -- 3.6.2. The Injection Molding Machine and Cycle -- 3.6.3. Mold Flow -- 3.6.4. Packing and Solidification -- 3.6.5. Reaction Injection Molding -- 3.7. Blow Molding -- 3.7.1. Process Overview -- 3.7.2. Blow Molding of Glass -- 3.7.3. Blow Molding of Polymers -- 3.8. Melt-Based Additive Processes -- 3.8.1. Process Overview -- 3.8.2. Fused Filament Fabrication -- 3.8.3. Inkjet Printing of Melts -- 3.8.4. Wire Arc Additive Manufacturing -- 3.9. Summary -- Questions and Problems -- Questions -- Problems -- Cited References -- Bibliography and Recommended Reading -- 3.2. Fundamentals -- 3.3. Shape Casting of Metal Melts -- 3.4 Melt Casting of Flat Glass Sheets -- 3.5 Polymer Extrusion and 3.6 Polymer Injection Molding -- 3.7 Blow Molding -- 3.8 Melt-Based Additive Processes -- Chapter 4: Solid Processes -- 4.1. Introduction -- 4.2. Fundamentals -- 4.2.1. Deformation and Plastic Flow Under Uniaxial Tension -- 4.2.2. Effects of Temperature and Strain Rate on Deformation -- 4.2.3. Deformation and Yielding Under Triaxial Stresses -- 4.2.4. Friction -- 4.2.5. Efficiency and Temperature Rise -- 4.3. Bulk Metal Deformation Processes -- 4.3.1. Process Overview -- 4.3.2. Metal Wire Drawing -- 4.3.3. Extrusion of Solid Metals -- 4.3.4. Forging -- 4.3.5. Rolling -- 4.3.6. Postprocessing after Metal Parts after Deformation Processing -- 4.4. Sheet Deformation Processes -- 4.4.1. Process Overview -- 4.4.2. Bending -- 4.4.3. Thermoforming -- 4.4.4. Superplastic Forming.
4.5. Solid-Based Additive Processes -- 4.5.1. Process Overview -- 4.5.2. Additive Friction Stir Deposition -- 4.6. Summary -- Questions and Problems -- Questions -- Problems -- Appendix: Stress in a Spherical Pressure Vessel -- Cited References -- Bibliography and Recommended Reading -- 4.2 Fundamentals -- 4.3 Bulk Metal Deformation Processing -- 4.4 Sheet Deformation Processing -- 4.5 Solid-Based Additive Processes -- Chapter 5: Powder Processes -- 5.1. Introduction -- 5.2. Fundamentals -- 5.2.1. Powder Characteristics and Flow -- 5.2.2. Sintering and Microstructure Development -- 5.2.3. Dimensional Changes During Densification -- 5.3. Pressing of Ceramic and Metal Powders -- 5.3.1. Process Overview -- 5.3.2. Powder Preparation -- 5.3.3. Uniaxial Pressing -- 5.3.4. Isostatic Pressing -- 5.3.5. Postprocessing of Green Pressed Parts -- 5.3.6. Hot Pressing and Hot Isostatic Pressing -- 5.4. Rotational Molding of Polymers -- 5.4.1. Process Overview -- 5.4.2. Powder Preparation -- 5.4.3. Rotational Molding Process Steps -- 5.5. Powder-Based Additive Processes -- 5.5.1. Process Overview -- 5.5.2. Selective Laser Sintering (Melting) -- 5.5.3. Binder Jet Printing -- 5.5.4. Powder-Based Directed Energy Deposition -- 5.6. Summary -- Questions and Problems -- Questions -- Problems -- Cited References -- Bibliography and Recommended Reading -- 5.2 Fundamentals -- 5.3 Pressing of Ceramic and Metal Powders -- 5.4 Rotational Molding of Polymers -- 5.5 Powder-Based Additive Processes -- Chapter 6: Dispersion and Solution Processes -- 6.1. Introduction -- 6.2. Fundamentals -- 6.2.1. Colloidal Dispersions -- 6.2.2. Polymer Solutions -- 6.2.3. Rheology of Dispersions and Solutions -- 6.2.4. Characteristics of Volatile Liquids for Dispersions and Solutions -- 6.2.5. Drying -- 6.2.6. Curing of Liquid Monomers -- 6.3. Ceramic Dispersion Shape Casting.
6.3.1. Process Overview -- 6.3.2. Capillary Action -- 6.3.3. Predicting Cast Layer Thickness -- 6.3.4. Postprocessing Operations -- 6.3.5. Slip-Casting Process Considerations -- 6.4. Coating and Tape Casting -- 6.4.1. Process Overview -- 6.4.2. Coating Methods -- 6.4.3. Polymer Coatings -- 6.4.4. Tape Casting of Ceramics -- 6.5. Extrusion and Injection Molding of Dispersions -- 6.5.1. Process Overview -- 6.5.2. Extrusion of Concentrated Dispersions -- 6.5.3. Powder Injection Molding -- 6.6. Dispersion and Solution-Based Additive Processes -- 6.6.1. Process Overview -- 6.6.2. Direct Ink Write -- 6.6.3. Vat Photopolymerization Methods -- 6.6.4. 3D Inkjet Printing With Liquid Monomers -- 6.7. Summary -- Questions and Problems -- Questions -- Problems -- Acknowledgments -- Cited References -- Bibliography and Recommended Reading -- 6.2 Fundamentals -- 6.3 Ceramic Dispersion Shape Casting -- 6.4 Coating and Tape Casting -- 6.5 Extrusion and Injection Molding With Dispersions -- 6.6 Dispersion and Solution-Based Additive Processes -- Chapter 7: Vapor Processes -- 7.1. Introduction -- 7.2. Fundamentals -- 7.2.1. Kinetic Theory of Gases and Its Relationship to Vapor Processes -- 7.2.2. Thin Film Microstructures -- 7.2.3. Epitaxial Growth of Single Crystal Films -- 7.3. Evaporation -- 7.3.1. Process Overview -- 7.3.2. Thermodynamics of Evaporation -- 7.3.3. Evaporation of Alloys and Compounds -- 7.3.4. Transport Phenomenon and Film Uniformity -- 7.3.5. Processes Related to Evaporation -- 7.4. Sputtering -- 7.4.1. Process Overview -- 7.4.2. Plasma Physics -- 7.4.3. Magnetron Sputtering -- 7.4.4. Radio Frequency (RF) Sputtering -- 7.4.5. Reactive Sputtering -- 7.4.6. Optimizing Sputtered Rates -- 7.5. Chemical Vapor Deposition -- 7.5.1. Process Overview -- 7.5.2. Thermodynamics of Formation Reactions -- 7.5.3. Types of Reactions -- 7.5.4. Kinetics of CVD.
7.5.5. Deposition Rate and Uniformity -- 7.6. Postprocessing of Films and Vapor-Based Additive Processes -- 7.6.1. Annealing -- 7.6.2. Patterning by Subtractive Processes -- 7.6.3. Nanoscale Additive Manufacturing -- 7.7. Summary -- Questions and Problems -- Questions -- Problems -- Cited References -- Bibliography and Recommended Reading -- 7.2 Fundamentals -- 7.3 Evaporation -- 7.4 Sputtering -- 7.5 Chemical Vapor Deposition -- 7.6 Postprocessing of Films and Vapor-Based Additive Processes -- Appendix A -- Index.