http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Wallpaper lining with nickel-chromiummolybdenum alloys
The material presented in this publication has been prepared for the general information of the reader and should not be used or relied on for specific applications without first securing competent advice. The Nickel Institute, its members, staff, and consultants do not represent or warrant its suitability for any general or specific use and assume no liability or responsibility of any kind in connection with the information herein. This document is made available by the Nickel Institute to assist Contractors and Fabricators concerned with the design and manufacture of flue gas desulphurisation process equipment. It is intended as a guide for the wallpapering or sheet lining of carbon steel or alloy vessels, ductwork, or chimney liners (stacks) where resistance to corrosion by an aggressive environment such as that encountered in flue gas systems is necessary. Those interested in wallpapering or sheet lining should also refer to AMPP Recommended Practice SP0292, "Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment."
Guide to the use of nickel-containing alloys ; no. 11020