http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Front Cover -- Fatigue in Additive Manufactured Metals -- Copyright Page -- Contents -- List of contributors -- 1 Introduction -- 2 Introduction to metal additive manufacturing and unique aspects relating to fatigue -- 2.1 Introduction -- 2.2 Metal additive manufacturing processes and materials -- 2.3 Porosity -- 2.4 Surface roughness and texture -- 2.5 Residual stress -- 2.6 Microstructure -- 2.7 Manufacturing errors -- 2.8 Postprocessing -- 2.9 Conclusion -- References -- 3 Low-cycle fatigue of additive manufactured metals -- Nomenclature -- 3.1 Introduction -- 3.2 Literature review -- 3.3 Cyclic stress-strain behavior -- 3.4 Stable stress-strain response -- 3.5 Fatigue life relationships -- 3.6 Fracture surfaces and failure mechanisms -- 3.7 Cyclic plasticity modeling -- 3.8 Fatigue life prediction -- Acknowledgments -- References -- 4 Fatigue and corrosion-fatigue crack growth behavior of wire arc additively manufactured parts -- Nomenclature -- 4.1 Introduction -- 4.2 Materials and fabrication method -- 4.3 Test set-up -- 4.3.1 Fatigue crack growth tests -- 4.3.1.1 Crack length estimation technique -- 4.3.1.2 Data analysis method -- 4.3.2 Corrosion-fatigue crack growth tests -- 4.3.2.1 Crack growth monitoring technique -- 4.3.2.2 Data analysis method -- 4.4 Experimental results and discussion -- 4.5 Conclusions -- Acknowledgments -- References -- 5 Fatigue behavior in the presence of defects -- Nomenclature -- 5.1 Introduction on defects and additive manufacturing -- 5.2 Brief classification of additive manufacturing defects -- 5.3 Influence of defects on the fatigue response -- 5.3.1 Fatigue response from defects of additive manufacturing parts without post-treatments -- 5.3.2 Effect of additive manufacturing process and post-treatments on the defect size and on the fatigue response.
5.4 Modeling the fatigue strength in the presence of defects -- 5.4.1 Fatigue strength and fatigue limit -- 5.4.2 S-N curves -- 5.5 Implications on the design against fatigue failures -- 5.5.1 Methods to assess defect size -- 5.5.2 Most critical defect: inspection techniques -- 5.5.3 From the most critical defect to the design against fatigue failure -- 5.6 Concluding remarks -- References -- 6 Analytical methods and computational approaches for modeling the fatigue behavior of additively manufactured materials -- 6.1 Analytical methods on the effect of volumetric defects -- 6.2 Analytical methods on the effect of surface defects -- 6.3 Numerical approaches on the effect of microstructure -- 6.4 An outlook on future enhanced hybrid defect/microstructure-sensitive fatigue models -- 6.5 Summary -- References -- 7 Very high cycle fatigue of additive manufacturing metals -- Nomenclature -- 7.1 Introduction to very high cycle fatigue -- 7.2 AlSi12 -- 7.3 AlSi10Mg and AlSi7Mg -- 7.4 Ti6Al4V -- 7.5 Inconel 718 -- 7.6 Stainless steel 316L -- 7.7 Conclusions and final remarks -- References -- 8 Defects in additive manufacturing and their influence on structural integrity -- 8.1 Additive manufacturing processes -- 8.2 Powder bed fusion category -- 8.3 Process parameters -- 8.4 Type of defects in additive manufacturing components -- 8.4.1 Porosity -- 8.4.2 Lack of fusion defects -- 8.4.3 Residual stress and thermal-induced micro-cracks -- 8.4.4 Surface roughness -- 8.5 Impact of defects on mechanical performances -- 8.6 Conclusions -- References -- 9 Post treatments for improving fatigue performance -- 9.1 Introduction -- 9.2 Surface post treatments -- 9.2.1 Subtractive methods -- 9.2.2 Nonsubtractive/additive methods -- 9.3 Heat treatments -- 9.4 Summary and conclusions -- References.
10 A review of the effects of laser shock peening on properties of additively manufactured Ti6Al4V -- 10.1 Introduction -- 10.2 Laser shock peening parameters -- 10.2.1 Laser power density -- 10.2.2 Spot size -- 10.2.3 Overlapping rate -- 10.3 Effects of laser shock peening on Ti6Al4V -- 10.3.1 Effect on microstructure -- 10.3.2 Effect on fatigue performance -- 10.4 Summary and recommendations for future work -- References -- 11 Mechanical properties of lattice materials for fatigue-tolerant design and fabrication -- 11.1 Introduction -- 11.2 Geometry and monotonic behavior of lattice structures -- 11.3 Experimental evaluation of fatigue behavior of lattice structures -- 11.4 Experimental assessment of fatigue-related aspects -- 11.4.1 Surface condition -- 11.4.2 Geometrical deviation -- 11.4.3 Internal defects -- 11.4.4 Residual stresses -- 11.4.5 Microstructure -- 11.5 Design against fatigue -- 11.5.1 Design and production -- 11.5.2 Post-treatments -- 11.6 Fatigue prediction methodologies -- 11.6.1 Global failure -- 11.6.2 Local failure -- 11.6.3 Fatigue crack growth life -- 11.6.4 Damage accumulation -- 11.7 Advanced design of additive manufacturing lattice structures against fatigue -- 11.8 Summary and outlook -- References -- Index -- Back Cover.
Filippo Berto and Anton Du Plessis, editors.
Additive Manufacturing Materials and Technologies Series