http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Contractor's Guide for Installation of Gasketed PVC Pipe for Water
Contractor's Guide for Installation of Gasketed PVC Pipe for Sewer
This guide is the most concise and authoritative available for the installation of PVC gasket-joint pressure and non-pressure pipes and fittings. Written and sponsored by the Uni-Bell PVC Pipe Association, it contains up-to-date information and comes complete with practical associated tables and figures that will help users to be more effective and efficient at installing PVC piping systems. This work provides preferred methods of installation based on field experience, published reports, and other industry sources. The guide's unique, easy-to-use reversible-book format provides two valuable guides in one--for working on water pipes or sewer pipes--making it easy for readers to quickly access the specific information they are seeking, be it on the job, in training, or studying for certification. Benefits of the Guide The Contractor's Guide provides value to several stakeholders: Contractors--Following this work's recommendations can improve job efficiency, reduce potential pipeline problems, and help ensure maximum performance. Owners--Proper installation helps ensure the maximum service life for piping systems. Workers (Training)--This guide can serve as a reference prior to undertaking a pipeline project. Workers (Certification)--In jurisdictions where installers are required to be certified, this work can serve as an invaluable study resource.
Cover (Contractor's Guide for Installation of Gasketed PVC Pipe for Water and Sewer); Water; Front Matter; Title Page; Copyright; Contents; Tables; Introduction; General Information; Safety; Project Types; Potable Water; Reclaimed Water; Sewer Force Mains; Irrigation; Rural Water; Standards; Sizes, Pressure Ratings, and OD Types; Colors; Print Line; PVC Fittings; Machined Couplings; Injection-Molded Fittings; Fabricated Fittings; Products; Iron Fittings; Mechanical-Joint Fittings; Push-on Fittings; Flanged Fittings; Valves and Hydrants; Pipe Arrival at the Job Site; Receiving and Inspection
UnloadingMaterials on the Job Site; Storage; Handling; Stringing; Pipe Trench; Trench Cross-Section; Trench Width; Depth of Trench; Foundation; Bedding; Haunching; Initial Backfill; Final Backfill; Support of Trench Walls; Stockpiling Excavated Material; Soils Report and Soils Engineer; Rock Conditions; Unstable Soils; Bottom of the Trench; Walls of the Trench; Dewatering; Buoyancy; Insertion Lines; Lowering Pipe into the Trench; Gasketed PVC Pipe Assembly; Assembly of Pipe to Pipe; Assembly of Pipe to Gasketed PVC Fittings; Assembly of PVC Fittings 12-inch (300mm) and Smaller
Assembly of PVC Fittings 14-inch (350mm) and LargerAssembly of Pipe to Iron Fittings; Assembly of Pipe to Iron Fittings with Mechanical Joints; Assembly of Pipe to Iron Fittings with Push-on Joints; Assembly of Pipe to Valves; Assembly of Pipe to Hydrants; Field-Cutting; Equipment; Straight Cut; Beveling; Adding Insertion Lines; Large-Diameter Pipe; Installed Pipe; Changes in Direction; Fittings; Deflecting the Pipe at a Joint; Bending the Pipe Barrel; Thrust Restraint; Concrete Thrust Blocks; Mechanical Restraint Devices; External Mechanical Joint Restraints; At PVC Fittings
At Iron FittingsAt Pipe-to-Pipe Joints; At Valves/Hydrants; At Reductions in Pipe Size; Internally Restrained Joints; Spline-Lock Gasketed Joint; Grip-Ring Gasketed Joint; Pin-and-Groove Gasketed Joint; Resisting Thrust in Low-Strength Soils; Resisting Vertical Thrust; Flanged Joints; Service Connections; Tapped Couplings; Tapping PVC Pressure Pipe; Safety Considerations; Temperature Considerations; Coupon; Smooth Coupon; Striations; Crown; Punch-Through; Problem Correction; Lubrication; Threads; Direct Tapping; Direct-Tapping Equipment; Tapping Machine; Cutting/Tapping Tool
Procedures for Direct TappingPlanning a Direct Tap; Position of the Tap; Considerations for Direct Tapping; Making a Direct Tap; Mounting the Machine; Cutting the Hole and Tapping the Threads; Inserting the Corporation Stop; Saddle Tapping; Saddle-Tapping Equipment; Saddle-Tapping Machine; Saddle-Tapping Cutting Tool; Procedures for Saddle Tapping; Planning a Saddle Tap; Position of the Tap; Considerations for Saddle Tapping; Making a Saddle Tap; Sleeve Tapping; Sleeve-Tapping Equipment; Tapping Sleeve; Tapping Valve; Tapping Machine; Cutting Tool; Procedures for Sleeve Tapping
Planning a Tap through a Sleeve and Valve
Includes bibliographical references and index.
Contractor's Guide for Installation of Gasketed PVC Pipe for Water / for Sewer
La Vergne : Industrial Press, Inc., ©2019