http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
1 online resource ( xv, 443 pages) : illustrations.
Front Cover; Fundamentals of Reservoir Engineering; Copyright Page; Table of Contents; PREFACE; ACKNOWLEDGEMENTS; IN MEMORIAM; NOMENCLATURE; Chapter 1. SOME BASIC CONCEPTS IN RESERVOIR ENGINEERING; 1. Introduction; 2. Calculation of hydrocarbon volumes; 3. Fluid pressure regimes; 4. Oil recovery: recovery factor; 5. Volumetric gas reservoir engineering; 6. Application of the real gas equation of state; 7. Gas material balance: recovery factor; 8. Hydrocarbon phase behaviour; References; Chapter 2. PVT ANALYSIS FOR OIL; 1. Introduction; 2. Definition of the basic PVT parameters.
3. Collection of fluid samples4. Determination of the basic PVT parameters in the laboratory and conversion for field operating conditions; 5. Alternative manner of expressing PVT laboratory analysis results; 6. Complete PVT analysis; References; Chapter 3. MATERIAL BALANCE APPLIED TO OIL RESERVOIRS; 1. Introduction; 2. General form of the material balance equation for a hydrocarbon reservoir; 3. The material balance expressed as a linear equation; 4. Reservoir drive mechanisms; 5. Solution gas drive; 6. Gascap drive; 7. Natural water drive.
8. Compaction drive and related pore compressibility phenomenaReferences; Chapter 4. DARCY'S LAW AND APPLICATIONS; 1. Introduction; 2. Darcy's law; fluid potential; 3. Sign Convention; 4. Units: units conversion; 5. Real gas potential; 6. Datum pressures; 7. Radial steady state flow; well stimulation; 8. Two-phase flow: effective and relative permeabilities; 9. The mechanics of supplementary recovery; References; Chapter 5. THE BASIC DIFFERENTIAL EQUATION FOR RADIAL FLOW IN A POROUS MEDIUM; 1. Introduction; 2. Derivation of the basic radial flow equation; 3. Conditions of solution.
4. The linearization of equation 5.1 for fluids of small and constant compressibilityReferences; Chapter 6. WELL INFLOW EQUATIONS FOR STABILIZED FLOW CONDITIONS; 1. Introduction; 2. Semi steady state solution; 3. Steady state solution; 4. Example of the application of the stabilized inflow equations; 5. Generalized form of inflow equation under semi steady state conditions; References; Chapter 7. THE CONSTANT TERMINAL RATE SOLUTION OF THE RADIAL DIFFUSIVITV EQUATION AND ITS APPLICATION TO OILWELL TESTING; 1. Introduction; 2. The constant terminal rate solution.
3. The constant terminal rate solution for transient and semi steady state flow4. Dimensionless variables; 5. Superposition theorem: general theory of well testing; 6. The Matthews, Brons, Hazebroek pressure buildup theory; 7. Pressure buildup analysis techniques; 8. Multi-rate drawdown testing; 9. The effects of partial well completion; 10. Some practical aspects of well surveying; 11. Afterflow analysis; References; Chapter 8. REAL GAS FLOW: GAS WELL TESTING; 1. Introduction; 2. Linearization and solution of the basic differential equation for the radial flow of a real gas.
Master and use copy. Digital master created according to Benchmark for Faithful Digital Reproductions of Monographs and Serials, Version 1. Digital Library Federation, December 2002. http://purl.oclc.org/DLF/benchrepro0212 MiAaHDL
digitized 2010 HathiTrust Digital Library committed to preserve pda MiAaHDL
Includes bibliographical references and indexes.
F4A6C26F-F8D3-4F0F-A2F7-826C3DA0253E OverDrive, Inc.