Advanced materials and structural engineering : proceedings of the International Conference on Advanced Materials and Engineering Structural Technology (ICAMEST 2015), 25-26 April 2015, Qingdao, China /
| Corporate Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Conference Proceeding eBook |
| Language: | English |
| Published: |
Boca Raton :
CRC Press,
2016.
|
| Subjects: | |
| Online Access: | Connect to the full text of this electronic book |
Table of Contents:
- Front Cover
- Table of contents
- Preface
- Organization
- Advanced material and application
- Production of external thread by means of enveloping with hob cutter
- Comparing between OECD member countries based on S & T innovation capacity
- Dependence of the coercive force on the size of the core/shell nanoparticles magnetite/titanomagnetite
- The interaction between contacting barrier materials for containment of radioactive wastes
- Structural and technological patterns of formation of surface nanostructured layers TiNiZr by high-speed flame spraying
- Determination of a constitutive relation for damage of Al-Si-Cu alloy (ADC12)
- Study on phase transition of metallic materials by Specific Volume Difference Method
- A review on research and application development of Super Absorbent Polymer in cement-based materials
- The effect of reducing agents on GO/manganese oxide composites for super-capacitors
- The properties of cementitious materials in prolonged curing
- Dynamic tensile behavior of Flattened Brazilian Disc of TiB2-B4C composites
- Dibenzothiophene adsorption on Activated Carbons and its water effect
- The preparation and desulfurization performance of carbon aerogels in-situ loaded with copper for fuel oils
- Synthesis of Ni-loaded carbon aerogels by in-situ and incipient wetness methods and their adsorption performance for dibenzothiophene in model fuel oil
- An experimental technique to investigate gas-turbine blades dry-friction dampers efficiency
- A nonlinear compressive response of polypropylene
- Comparative investigation into the catalytic efficiency of Ni and Fe in the formation of carbon coils
- The effect of orifice head loss coefficient on the discharge of throttled surge tank
- Effect of an enclosed cage structure on the chain characteristics of TSP-POSS/PU hybrid composites.
- Influence of low firing temperature on the characteristics of Positive Temperature Coefficient of Resistance and the Ni internal electrode of multilayer Ba1.005(Ti1-xNbx)O3 ceramics
- Effects of interstitial impurity content on the plastic deformation behavior in austenitic steel monocrystals
- An experimental method of the cutting force coefficient estimation of grey cast iron FC25
- Changes in the state of stress in enclosing panels after additional thermal insulation
- Slag from Biomass Combustion (BCS)-chemical properties in accordance with BCS utilization in cement concrete
- Fundamental thermo-elastic solutions for 2D hexagonal Quasicrystal
- Effect of induction heating power on zinc-coating quality
- High-temperature deformation and strain measurement for aircraft materials using digital image correlation
- Material selection of auto-body plates based on simplified models
- MFC/NFC aerogel-Ag composite and its application
- Nanopaper with Ag composite and its application
- Effective thermal conductivity of multiple-phase transversely isotropic material having coupled thermal system
- Using optical methods to determine high resolution Coefficient of Thermal Expansion of materials
- Study on the properties of W-C infiltrated strengthening layer on H13 steel surface formed by plasma alloying
- Petrographic and chemical assessment of siliceous limestone for cement production suitability
- Structural and civil engineering
- A study on the fatigue strength of a truck in railway applications
- A method for constructing a simplified model of wire strand cable
- Synergistic interaction of scaling and abrasion on the fly ash concretes
- Performance comparison analysis of SUP-13 Lucobit asphalt mixture
- Quantitative inspection of ferroconcrete damage by using ground-penetrating radar.
- Properties of the advanced sulfur-bituminous pavements
- Application research on concrete recycled aggregate of construction waste in the road base
- Design an angle-inserting joint for steel sandwich panel
- Green Building Development system modeling and simulation
- Corrosion measurement of galvanic cell-type concrete sensor
- The analysis of air flows near the windbreak constructions on offshore structures
- Research on the construction technique for integrated control of embankment settlement due to extending of pile platform into subgrade
- Research on the construction technology of self-water stopping pit support structure of pre-stressed pipe piles
- Incentive contract design of construction engineering time based on the principal-agent model
- Studying of the influence to property of road base with cement stabilized gravel by the iron tailings sand
- Durability of concrete to sulfate attack under different environments
- Experimental study on particle drift velocity in single-stage double-vortex collecting plate ESP
- Synthesis and modification of polyurethane type track
- Recognition of traffic signs using local feature multi-layer classification
- Detection of traffic signs based on multi-feature high credibility regions
- The role of cementitious materials in building materials
- Time-domain buffeting analysis of suspension bridge under non-stationary typhoon excitation
- Mechanism analysis for punching shear strength of hollow flat slabs
- Establishing a Decision Support Module for bridge maintenance in Taiwan
- Strut-and-Tie Model for shear capacity of squat shear walls
- Abnormal vibration analysis of a metro vehicle
- Structure health monitoring using the matched chaotic excitation
- Evaluation of consulting firms for Mass Rapid Transit projects.
- Flexural behavior of hollow deck-plate slabs with simplified construction procedure
- Diffusion model and damage development of concrete exposed to freeze-thaw cycles
- Fundamental properties of lightweight foam soil concrete using high volume Supplementary Cementitious Materials
- Fatigue stress-strain relationship of normaland light-weight concrete mixtures under axial compression
- Performance parameters of concrete and asphalt-concrete surfaces
- Pedestrian-induced vibrations in footbridges: A Fully Synchronized Force Model
- Shrinkage of phosphoaluminate cement concrete
- Road surface micro- and macrotexture evolution in relation to asphalt mix composition
- Effect of welding speed on the micro-hardness and corrosion resistance of similar laser welded (304/304) stainless steels and dissimilar (304/A36) stainless and carbon steels
- Mechanical and industrial engineering
- Reliability of detection of Glass Break in Intrusion and Hold-Up Alarm Systems
- A system utility analysis of Multiple Launcher Rocket System
- The influence of sintering temperature on microstructure and electrical performances of (1-x)BCZT-xCuO lead-free ceramics
- Effect of Li on the microstructure and electrical properties of BCZT-xLi lead-free piezoelectric ceramics
- The key controlling factors of tight sandstone reservoir of the lower Shihezi formation in Linxing area in eastern Ordos Basin
- Q & P process in manufacture of hollow products
- Generalized-K (GK) distribution: An important general channel model for mobile fading channels
- Thin-layer element modeling method of aero-engine bolted joints
- The effect of controlled cooling after hot rolling on the microstructure and mechanical properties of LX72A
- A finger-interaction-based LED control system
- Development of a SMPS system using LLC resonant converter for high efficiency LED driver.