http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Multi-Channel Receivers for Wireless and Wireline Communication Systems
The constant increase in global data generation generated by applications such as internet of things (IoT) and artificial intelligence (AI) calls for an improvement in the speeds at which data is transmitted across communication devices. This requires that wireless and wireline communication devices operate at a higher data rate. Denser and more spectral efficient modulations seem like a straightforward solution, but they pose distinct challenges to the design of these transceivers. The presence of multiple dynamic and strong interferers in the radio frequency (RF) spectrum creates a hostile environment for the receivers, which in the presence of mild nonlinearities will create intermodulation products and cause spectral regrowth that result in a significant reduction in their dynamic range that could potentially desensitize the receiver. As data rates increase in wireline communications, more systems adopt an ADC-based receiver architecture that provides a viable solution to implement more advanced equalization schemes in the DSP to overcome challenges inherent to typical electrical channels, such as high frequency-dependent loss and signal reflections. Nonetheless, these new architectures are still susceptible to sampling clock jitter that produces jitter-induced noise from sampling the signal and degrade the overall signal-to-noise ratio (SNR). Furthermore, nonlinearities in the analog front-end cause compression of the modulated signal that will pose a limit on the maximum modulation order that may be used. To help tackle the previously described obstacles in wireless and wireline communications. This dissertation presents a new digital linearization technique that uses a dual-path receiver to remove the third-order nonlinearity of a wireless receiver. Furthermore, a multicarrier architecture for high-speed wireline communications is introduced to overcome the sampling jitter problem. Finally, an alternative equalization method for wireline ADC-based receivers based on recurrent neural networks (RNNs). The RNN equalizer offers significant bit-error-rate improvement in the presence of analog front-end nonlinearities and a channel with a notch on its frequency response. The electronic version of this dissertation is accessible from https://hdl.handle.net/1969.1/197941
Doctor of Philosophy Texas A&M University 2022 https://hdl.handle.net/1969.1/197941