| Abstract: | Unconventional shale gas production in the United States has been largely improved due to the development of hydraulic fracturing technology. However, the shale gas production system is generally complex; further, such enhanced levels of production have generated great concerns on its accompanying environmental implications, especially regarding shale gas water management. To handle the complexity associated with shale gas production system and identify the sustainable water management strategy, many optimization-based approaches have been developed. However, few of them considered the hydraulic fracturing operation as a dynamic process, where the pumping profile directly determines the volume of freshwater consumed and affects the production rates of both shale gas and wastewater. Considering the significant spatiotemporal variation in water footprint of hydraulic fracturing, those obtained planning and operational decisions of shale gas production system could be suboptimal and thus need to be updated when well development strategy changes. From another perspective, one problem could be that the pumping profile is generally designed to only maximize well productivity, without considering the impact of water management. To handle these challenges, the overall objective of this research is to develop a framework for the integration of pumping profile design and water management optimization to achieve the economically viable and environmentally sustainable water management strategy along with maximizing shale gas production. To this end, we initially focus on the development of a novel controller design framework for hydraulic fracturing while explicitly taking into account the associated post-fracturing water management. In particular, a dynamic input-output model is developed to estimate the characteristics of shale gas wastewater produced; and, a mapping-based technique is proposed to estimate the total annual cost of wastewater management and total revenue from shale gas. This framework is demonstrated to be capable to balance the trade-offs between hydraulic fracturing and water management by manipulating the pumping profile. Subsequently, we further extend this study by considering the following practical considerations. First, to better understand the significant spatiotemporal variation in water footprint associated with shale gas well development, the real water-use and flowback and produced (FP) water production data for individual shale gas wells drilled in the Eagle Ford and Marcellus shale regions are collected and analyzed. Herein, a typical model of shale gas production system is utilized to demonstrate how the variation in water recovery ratio can affect the optimal design and operation decisions. Second, to better describe the complex shale gas production system, an optimization model for shale gas supply chain network (SGSCN) incorporating of hydraulic fracturing water cycle is developed. Herein, capacity planning for both large-scale conventional facility and small-scale modular device is considered to achieve a flexible and efficient water management strategy. Third, to better integrate the optimization of shale gas production system and control of hydraulic fracturing, an online integrated scheduling and control framework with two feedback loops is proposed. Herein, the offset-free model predictive control (MPC) scheme is designed to compensate for plant-model mismatch. The electronic version of this dissertation is accessible from https://hdl.handle.net/1969.1/197812 |
|---|