Heat-transfer calculations /
| Other Authors: | |
|---|---|
| Format: | Book |
| Language: | English |
| Published: |
New York :
McGraw-Hill,
[2006]
|
| Series: | McGraw-Hill calculations.
|
| Subjects: | |
| Online Access: | ebrary Knovel Table of contents Available to Stanford-affiliated users at: Available to Stanford-affiliated users. Contributor biographical information Publisher description |
Table of Contents:
- PART 1. INTRODUCTORY CALCULATIONS
- Multiphase films and phase change / Greg F. Naterer
- Industrial heat-transfer calculations / Mohammad G. Rasul
- PART 2. STEADY-STATE CALCULATIONS
- Heat-transfer and temperature results for a moving sheet situated in a moving fluid / John P. Abraham, Ephraim M. Sparrow
- Solution for the heat-transfer design of a cooled gas turbine airfoil / Ronald S. Bunker
- Steady-state heat-transfer problem: cooling fin / David R. Dearth
- Cooling of a fuel cell / Jason M. Keith
- Turbogenerator rotor cooling calculation / James T. McLeskey, Jr.
- Heat transfer through a double-glazed window / P.H. Oosthuizen, David Naylor
- PART 3. TRANSIENT AND CYCLIC CALCULATIONS
- Use of Green's function to solve for temperatures in a bimaterial slab exposed to a periodic heat flux applied to corrosion detection / Larry W. Byrd
- Lumped-capacitance model of a tube heated by a periodic source with application to a PDE tube / Larry W. Byrd [and others]
- Calculation of decoking intervals for direct-fired gas and liquid cracking heaters / Alan Cross
- Transient heat-transfer problem: tape pack cooling / David R. Dearth
- Calculation of the transient response of a roof to diurnal heat load variations / Jack M. Kleinfeld
- Jack M. Kleinfeld
- Transient heating of a painted vehicle body panel in automobile assembly plant paint shop oven / Thomas M. Lawrence, Scott Adams
- Thermal system transient response / James E. Marthinuss, Jr., George Hall
- Thermal response of laminates to cyclic heat input from the edge / Wataru Nakayama
- Simple calculation procedure for transient heat and mass transfer with phase change: moist air example / Pedro J. Mago, S.A. Sherif
- Calculation procedure for first- and second-law efficiency optimization of refrigeration cycles / J.S. Tiedeman, S.A. Sherif
- Transient analysis of low temperature, low energy carrier (LoTEC) / Francis C. Wessling
- Parameter estimation of low temperature, low energy carrier (LoTEC) / Francis C. Wessling, James J. Swain
- PART 4. HEAT-TRANSFER-COEFFICIENT DETERMINATION
- Calculation of convective heat-transfer coefficeint using semi-infinite solid assumption / Srinath V. Ekkad
- Determination of heat-transfer film coefficients by the Wilson analysis / Ronald J. Willey
- PART 5. TUBES, PIPES, AND DUCTS
- Calculation of local inside-wall convective heat-transfer parameters from measurements of local outside-wall temperatures along an electrically heated circular tube / Afshin J. Ghajar, Jae-yong Kim
- Two-phase pressure drop in pipes / S. Dyer Harris
- Heat-transfer calculations for predicting solids deposition in pipeline transportation of "waxy" crude oils / Anil K. Mehrotra, Hamid O. Bidmus
- Heat transfer in a circular duct / Nicholas Tiliakos
- PART 6. HEAT EXCHANGERS
- Air cooling of a high-voltage power supply using a compact heat exchanger / Kirk D. Hagen
- Energy recovery from an industrial clothes dryer using a condensing heat exchanger / David Naylor, P.H. Oosthuizen
- Sizing of a crossflow compact heat exchanger / Dusan P. Sekulic
- Single-phase natural circulation loops: an analysis methodology with an example (numerical) calculation for an air-cooled heat exchanger / Daniel M. Speyer
- Evaluation of condensation heat transfer in a vertical tube heat exchanger / Karen Vierow
- Heat-exchanger design using an evolutionary algorithm / Keith A. Woodbury
- PART 7. FLUIDIZED BEDS
- Fluidized-bed heat transfer / Charles J. Coronella, Scott A. Cooper
- PART 8. PARAMETER AND BOUNDARY ESTIMATION
- Estimation of parameters in models / Ashley F. Emery
- Upper bounds of heat transfer from boxes / Wataru Nakayama
- Estimating freezing time of foods / R. Paul Singh
- PART 9. TEMPERATURE CONTROL
- Precision temperature control using a thermoelectric module / Marc Hodes
- PART 10. THERMAL ANALYSIS AND DESIGN
- Thermal design and operation of a portable PCM cooler / R. Letan, G. Ziskind
- First-order thermal analysis of ballon-borne air-cooled electronics / Angela Minichiello
- Thermal analysis of convectively cooled heat-dissipating components on printed-circuit boards / Hyunjae Park
- Design of a fusion bonding process for fabricating thermoplastic-matrix composites / F. Yang, R. Pitchumani
- PART 11. ECONOMIC OPTIMIZATION
- Economic optimization of heat-transfer systems / Thomas M. Adams
- Turkey oven design problem / Jason M. Keith.