http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
1 online resource ( xiv, 696 pages) : illustrations (some color).
Preface -- Notes from the Editors -- Acknowledgments -- About the Authors -- Contents -- 1 -- Introduction to Rotary Drilling -- 1.1 Foreword -- 1.2 History of Drilling -- 1.3 The Drilling Team -- 1.4 Drilling Rigs -- 1.5 Drilling Rig Systems -- 1.6 Marine Drilling -- 1.7 Drilling Cost Analysis -- Problems -- Nomenclature -- Abbreviations -- References -- Appendixâ€?Simple Statistics and Least-Squares Fit -- SI Metric Conversion Factors -- 2 -- Introduction to Geomechanics in Drilling -- 2.1 Borehole Stability Analysis for Vertical Wells
2.2 Borehole Stability Analysis for Inclined Wells2.3 General Methodology for Analysis of Wellbore Stability -- 2.4 Empirical Correlations -- Problems -- Nomenclature -- References -- Further Reading and Advanced Topics -- 3 -- Drilling Fluids -- 3.1 Introduction -- 3.2 A Brief History of Drilling Fluids -- 3.3 Functions of Drilling Fluids -- 3.4 Drilling-Fluid Categories -- 3.5 Clay Chemistry -- 3.6 Estimating Drilling Fluid Properties -- 3.7 Testing of Drilling Fluids -- 3.8 Solids Control -- 3.9 Health, Safety, and Environmental (HSE) Considerations
ProblemsNomenclature -- Acknowledgments -- References -- Further Reading -- SI Metric Conversion Factors -- 4 -- Cementing -- 4.1 Composition of Portland Cement -- 4.2 Cement Testing -- 4.3 Standard and Nonstandard Drilling Cements -- 4.4 Cement Additives -- 4.5 Cement Placement Techniques -- 4.6 Well Parameters Affecting Cement Design and Operations -- Problems -- References -- Further Reading and Advanced Topics -- SI Metric Conversion Factors -- 5 -- Drilling Hydraulics -- 5.1 Introduction to Drilling Hydraulics
5.2 Hydrostatic Pressure Calculations5.3 Steady Flow of Drilling Fluids -- 5.4 Rheological Models of Drilling Fluids -- 5.5 Laminar Flow in Pipes and Annuli -- 5.6 Turbulent Flow in Pipes and Annuli -- 5.7 Frictional Pressure Drop in an Eccentric Annulus -- 5.8 Frictional Pressure Drop With Pipe Movement -- 5.9 Calculating Steady-State Pressures in a Wellbore -- 5.10 Dynamic Surge and Swab Pressures -- 5.11 Cuttings Transport -- Problems -- Nomenclature -- References -- Further Reading and Advanced Topics -- 6 -- Rotary Drilling Bits -- 6.1 Introduction
6.2 Bit Types6.3 Manufacturing and Design of Bits -- 6.4 IADC Bit-Classification System -- 6.5 IADC Bit Dull-Grading System -- 6.6 Rock-Failure Mechanism During Drilling -- 6.7 Wear Mechanism -- 6.8 ROP -- 6.9 Economics -- 6.10 Bit-Operation Practices -- Problems -- Nomenclature -- References -- SI Metric Conversion Factors -- 7 -- Casing Design -- 7.1 Introduction -- 7.2 Casing Manufacture -- 7.3 Casing Standardization -- 7.4 Line Pipe -- 7.5 Strength of Materials -- 7.6 Casing-Tube Performance Properties -- 7.7 Corrosion
editors, Robert F. Mitchell, Stefan Z. Miska ; contributors, Bernt S. Aadnoy [and others].
Includes bibliographical references and index.
Richardson, TX : Society of Petroleum Engineers, ©2011