http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013)
a collection of papers presented during the 13th biennial worldwide congress on refractories, September 10-13, 2013, Victoria, British Columbia, Canada
Unified International Technical Conference on Refractories 2013 : Victoria, B.C.)
Proceedings containing 231 manuscripts that were submitted and approved for the 13th biennial worldwide refractories congress recognized as the Unified International Technical Conference on Refractories(UNITECR), held September 10-13, 2013.
Cover; Title Page; Copyright Page; Contents; Preface; Advanced Installation Techniques and Equipment; DEVELOPMENT OF AUTOMATIC REPAIR TECHNOLOGY BY CONTINUOUS AND QUICK MIXING TECHNOLOGY; ABSTRACT; 1 PREFACE; 2 FEATURES OF TFIE GUNNING EQUIPMENT; 2-1 Conventional gunning methods; 2-2 Features and advantages of the QMS method; 1) The system of the QMS method; 2) The Continuous Quick Mixing device; 3) Principle and mechanical structure of the gunning; 3 EVALUATION OF THE MIXING EFFECT; 4 FEATURES OF THE REFRACTORY MATERIALS FOR QMS; 5 AUTOMATIC CONTROL OF REPAIR WORK.
6 durability of the material applied with the qms method in hot ladles7 the automatic repair equipment for steel ladles; 8 conclusions; reference; development of continuous quick mixing & repairing technology; abstract; issues in conventional gunning application and the solution for that; issues in concentional gunning application; the solution for the issues; h-qmi systrm; mechanism; the gunning system; the effect of continuous quick mixing; application in the converter repair; outline of the gunning repair system for converters; the gunning material for converter repair.
GUNNING PERFORMANCE IN A HOT CONVERTERPPLICATION IN THE STEEL LADLE REPAIR; OUTLINE OF THE REPAIR SYSTEM FOR STEEL LADLES; THE GUNNING MATERIALS FOR STEEL LADLE REPAIR; GUNNING PERFORMANCE IN A HOT STEEL LADLE; SUMMARY OF INTRODUCING H-QMI METHOD TO SEVERAL HOT FURNACES; CONCLUSION; REFERENCE; THE NEXT GENERATION OF MONOLITHIC INSTALLATION TECHNOLOGY: CONTINUOUS MIXING OF LOW CEMENT CASTABLES FOR WET SHOTCRETING APPLICATIONS; ABSTRACT; 1. INTRODUCTION; 2. EXPERIMENTAL; 2.1 Materials; 2.2 Equipment; 2.3 Methods; 2.4 Experimental Detail; 3. RESULTS AND DISCUSSION; 3.1 Placing Properties.
3.2 Physical Properties4. CONCLUSIONS; 5. FUTURE WORK; 6. ACKNOWLEDGEMENTS; REFERENCES; TAPHOLES REPAIR ON CSN'S BLAST FURNACE 3: CORE & CAST AND CORE & PLUG; ABSTRACT; INTRODUCTION; MATERIALS AND METHODS; Tapholes Evaluation; Core & CastTM Repair Method; Core & PlugTM Repair Method; RESULTS AND DISCUSSION; CONCLUSION; REFERENCES; GUNNING ROBOTS FOR THE HOT REPAIR; ABSTRACT; LADLES; EAF; RH-DEGASSERS; Advanced Testing of Refractories; CHARACTERIZATION METHODS OF ZIRCONIA AND THE IMPACT OF STABILIZING AGENTS ON ITS FUNCTIONALITY; ABSTRACT; INTRODUCTION; MICROSTRUCTURAL INVESTIGATION.
CRYSTALLOGRAPHYSPECTROSCOPY; DISCUSSION AND CONCLUSIONS; ACKNOWLEDGEMENTS; REFERENCES; CHARACTERIZATION OF THE MECHANICAL BEHAVIOR OF MAGNESIA SPINEL REFRACTORIES USING IMAGE CORRELATION; ABSTRACT; INTRODUCTION; EXPERIMENTAL PROCEDURES; values of material properties correspond to the average value.; RESULTS AND DISCUSSION; CONCLUSION; ACKNOWLEDGEMENT; REFERENCES; TEMPERATURE DEPENDENT THERMO-MECHANICAL BEHAVIOR OF NOVEL ALUMINA BASED REFRACTORIES; ABSTRACT; INTRODUCTION; EXPERIMENTAL; RESULTS AND DISCUSSION; SUMMARY AND CONCLUSIONS.
edited by Dana G. Goski, Jeffrey D. Smith.
Includes bibliographical references and author index.
UNITECR 2013: Proceedings of the Unified International Technical Conference on Refractories