Metallic materials : determination of forming-limit curves for sheet and strip. Part 2, Determination of forming-limit curves in the laboratory = Matériaux métalliques : détermination des courbes limites de formage pour les tôlets et bandes en laboratoire. Partie 2, Détermination des courbes limites de formage en laboratoire.
| Format: | Book |
|---|---|
| Language: | English |
| Published: |
Geneva, Switzerland :
ISO,
2021.
|
| Edition: | Second edition, 2021-02. |
| Series: | International standard ;
ISO 12004-2. |
| Subjects: |
Similar Items
Metallic materials : determination of forming-limit curves for sheet and strip.
Published: (2020)
Published: (2020)
International metallic materials cross reference /
Published: (1983)
Published: (1983)
International metallic materials cross reference 1979 /
Published: (1978)
Published: (1978)
Standards and specifications for metals and metal products. : Nationally recognized standards and specifications for ores, metals, and manufactures except machinery, vehicles, and electrical supplies /
by: Wardlaw, George Addison, 1868-
Published: (1933)
by: Wardlaw, George Addison, 1868-
Published: (1933)
Atlas of stress-strain curves /
Published: (1987)
Published: (1987)
Atlas of stress-strain curves.
Published: (2002)
Published: (2002)
Metallic materials properties development and standardization (MMPDS) : MMPDS-11, July 2016.
Published: (2016)
Published: (2016)
Metallic materials properties development and standardization (MMPDS) : ‡b MMPDS-12, July 2017.
Published: (2017)
Published: (2017)
The initial buckling behavior of flat and curved fiber metal laminate panels /
by: Verolme, K.
Published: (1998)
by: Verolme, K.
Published: (1998)
Metallic materials properties development and standardization (MMPDS) : ‡b MMPDS-14, July 2019.
Published: (2019)
Published: (2019)
Metallic materials properties development and standardization (MMPDS).
Published: (2014)
Published: (2014)
Metallic materials properties development and standardization (MMPDS).
Published: (2015)
Published: (2015)
Metallic materials properties development and standardization (MMPDS) : MMPDS-05.
Published: (2010)
Published: (2010)
Metallic materials properties development and standardization (MMPDS) : MMPDS-07, April 2012.
Published: (2012)
Published: (2012)
Metallic materials properties development and standardization (MMPDS) : MMPDS-11, July 2016.
Published: (2016)
Published: (2016)
Metallic materials properties development and standardization (MMPDS) : MMPDS-08, April 2013.
Published: (2013)
Published: (2013)
Plastichnostʹ i prochnostʹ konstrukt︠s︡ionnoĭ stali /
by: Bykov, V. A. (Vladimir Aleksandrovich)
Published: (1959)
by: Bykov, V. A. (Vladimir Aleksandrovich)
Published: (1959)
Atlas of stress-corrosion and corrosion fatigue curves /
Published: (1990)
Published: (1990)
Stress concentrations in structural steel pipe due to the presence of a single circular hole /
by: O'Neal, Nolan A. (Nolan Arthur), 1960-
Published: (1986)
by: O'Neal, Nolan A. (Nolan Arthur), 1960-
Published: (1986)
High temperature design data for ferritic pressure vessel steels /
Published: (1983)
Published: (1983)
Structural welding code--sheet steel /
Published: (1998)
Published: (1998)
MMPDS-13 : Metallic materials properties development and standardization (MMPDS).
Published: (2018)
Published: (2018)
Metallic materials specification handbook /
by: Ross, Robert B.
Published: (1992)
by: Ross, Robert B.
Published: (1992)
International metallic materials cross-reference /
Published: (1988)
Published: (1988)
Stresses in structural steel angles, with special tables /
by: Waterbury, L. A. (Leslie Abram), 1880-1918
Published: (1917)
by: Waterbury, L. A. (Leslie Abram), 1880-1918
Published: (1917)
Symposium on deformation of metals as related to forming and service /
Published: (1949)
Published: (1949)
The fracture of metals /
by: Gensamer, Maxwell, 1902-
Published: (1947)
by: Gensamer, Maxwell, 1902-
Published: (1947)
Prevention of the failure of metals under repeated stress : a handbook prepared for the Bureau of aeronautics, Navy department, by the staff of Battelle memorial institute, under the auspices of the National research council of the National academy of sciences.
Published: (1941)
Published: (1941)
Design loads on structures during construction /
Published: (2002)
Published: (2002)
Atlas of stress-strain curves.
Published: (2002)
Published: (2002)
Architectural metals : a guide to selection, specification, and performance /
by: Zahner, L. William
Published: (1995)
by: Zahner, L. William
Published: (1995)
Metallic materials specification handbook /
by: Ross, Robert B.
Published: (1992)
by: Ross, Robert B.
Published: (1992)
Atlas of stress-corrosion and corrosion fatigue curves /
Published: (1990)
Published: (1990)
Mechanics of metals /
by: D'Isa, Frank A., 1921-
Published: (1968)
by: D'Isa, Frank A., 1921-
Published: (1968)
Failures in wire baskets of ureteral stone dislodgers /
by: Christ, B. W.
Published: (1969)
by: Christ, B. W.
Published: (1969)
Unified numbering system for metals and alloys : metals and alloys currently covered by UNS numbers, July, 1974 : a joint activity of the Society of Automotive Engineers, inc., SAE J1086, American Society for Testing and Materials, ASTM DS-56.
Published: (1975)
Published: (1975)
Unified numbering system for metals and alloys : and cross index of chemically-similar specifications /
Published: (1977)
Published: (1977)
Correlation of deep-drawing press performance with tensile properties ; a report on cooperative research of the USA Committee of the International Deep Drawing Research Group.
Published: (1965)
Published: (1965)
Metals & alloys in the unified numbering system : with a description of the system and a cross index of chemically similar specifications /
Published: (1986)
Published: (1986)
Metals & alloys in the unified numbering system : with a description of the system and a cross index of chemically similar specifications.
Published: (1996)
Published: (1996)