Improved models for predicting the modulus of rupture of lumber under third point loading /

Bibliographic Details
Main Author:	Verrill, S. P. (Author)
Format:	Government Document eBook
Language:	English
Published:	[Madison, Wis.] : United States Department of Agriculture, Forest Service, Forest Products Laboratory, 2021.
Series:	Research paper FPL-RP ; 712.
Subjects:	Weibull distribution. Lumber > Measurement. Strength of materials. Lumber > Grading. Specific gravity. Stress-strain curves.
Online Access:	https://purl.fdlp.gov/GPO/gpo190467

Similar Items

Atlas of stress-strain curves.
Published: (2002)

Estimated probability of breakage of lumber of a fixed "grade" can vary greatly from mill to mill and time to time /
by: Verrill, S. P.
Published: (2020)

Relation between specific gravity and iron content of rocks from the Red Mountain Formation, Alabama /
by: Sheldon, Richard Porter, 1923-
Published: (1964)

LORCAT : a log recovery analysis tool for hardwood sawmill efficiency /
by: Thomas, R. Edward, et al.
Published: (2021)

An evaluation of a proposed revision of the ASTM D 1990 grouping procedure /
by: Verrill, S. P.
Published: (2013)

Gripped-end effect in tension proof testing of dimension lumber /
Published: (1991)

Tests of prestressed cellular slabs (Slab Nos. 1, 2, 3, and 4) /
by: Chi, M.
Published: (1955)

Statistical considerations in duration of load research /
by: Link, Carol L.
Published: (1988)

Monitoring of visually graded structural lumber /
by: Kretschmann, David E., et al.
Published: (1999)

Properties of southern pine in relation to strength grading of dimension lumber /
by: Doyle, D. V., et al.
Published: (1966)

Distribution of wheel loads on timber bridges /
by: Erickson, E. C. O., et al.
Published: (1965)

Conditioning stress development and factors that influence the prong test /
by: Fuller, James
Published: (1995)

Large strain finite element method : a practical course /
by: Munjiza, Antonio A., et al.
Published: (2015)

Stresses around rectangular cut-outs in skin-stringer panels under axial loads - II /
by: Kuhn, Paul
Published: (1943)

Elastostatic fields in a crack tip neighborhood : measurements and uniqueness /
by: Schmidt, Joseph Henry
Published: (1978)

Mechanics of materials. an introduction to the mechanics of elastic and plastic deformation of solids and structural materials /
by: Hearn, E. J. (Edwin John)
Published: (1997)

Description of stress-strain curves by three parameters /
by: Ramberg, Walter
Published: (1943)

Mean and tolerance limit stresses and stress modeling for compression perpendicular to grain in hardwood and softwood species /
by: Bendtsen, B. A., et al.
Published: (1979)

Small-sample solution to the two-sample problem for quantiles using melded random confidence intervals /
by: Arvanitis, Matthew A.
Published: (2022)

Dynamic loadings due to waves and ship motions /
by: Lewis, Edward V
Published: (1975)

Douglas fir use book : structural data and design tables.
Published: (1958)

Structural and stress analysis /
by: Megson, T. H. G.
Published: (2000)

Bending of rectangular plates with large deflections /
by: Wang, Chi-Teh
Published: (1948)

Stress and strain concentration at a circular hole in an infinite plate /
by: Stowell, Elbridge Z.
Published: (1950)

Critical-stress of thin-walled cylinders in axial compression /
by: Batdorf, S. B., et al.
Published: (1947)

Theory of notch stresses : principles for exact calculation of strength with reference to structural form and material.
by: Neuber, Heinz
Published: (1961)

Theory of couple-stresses in bodies with constrained rotations /
by: Sokołowski, Marek
Published: (1972)

Fatigue technology assessment and strategies for fatigue avoidance in marine structures : appendices /
by: Capanoglu, Cuneyt C
Published: (1992)

The strength and stiffness of shear webs with and without lightening holes /
by: Kuhn, Paul
Published: (1942)

Equipment and test procedure for determining multiaxial tensile and combined tensile-compressive strength of concrete /
by: Saucier, K. L.
Published: (1974)

Characterization of physical and mechanical properties of 2 by 4 truss lumber /
Published: (1983)

Finite element techniques for orthotropic plane stress and orthotropic plate analysis /
by: Maki, A. C.
Published: (1968)

Stress and distortion measurements in a 45 degree swept box beam subjected to bending and to torsion /
by: Zender, George
Published: (1948)

Grading options for Western hemlock "pulpwood" logs from Southeastern Alaska /
by: Green, David W. (David William), 1944-2019
Published: (2000)

A solid-inclusion borehole probe to determine three-dimensional stress changes at a point in a rock mass : development and laboratory testing of a solid-inclusion borehole instrument and the mathematical bases for reduction of the three-dimensional data produced by the instrument /
by: Nichols, Thomas C., et al.
Published: (1968)

Elements of Experimental stress analysis /
by: Hendry, A. W. (Arnold W.), 1921-2013
Published: (1977)

Square plate with clamped edges under normal pressure producing large deflections /
by: Levy, Samuel
Published: (1942)

The strength of shell bodies-- theory and practice /
by: Ebner, H.
Published: (1937)

Deformation analysis of wing structures /
by: Kuhn, Paul
Published: (1947)

Theory of elastic stability /
by: Timoshenko, Stephen, 1878-1972
Published: (2009)