Degradation of leak-chase channel systems for floor welds of metal containment shell and concrete containment metallic liner.

Containment integrated leak rate tests.
Published: (1985)

Degradation of prestressing tendon systems in prestressed concrete containments.
Published: (1999)

Degradation of prestressing tendon systems in prestressed concrete containments.
Published: (1999)

Potential degradation of secondary containment.
Published: (1990)

Degradation of steel containments.
Published: (1986)

Risk-informed assessment of degraded containment vessels /
Published: (2006)

Steel containment degradation and associated license renewal aging management issues.
Published: (2011)

Degraded coatings and corrosion of steel containment vessels.
Published: (1989)

Direction-dependent leak characteristics of containment purge valves.
Published: (1988)

Potential for Teflon® material degradation in containment penetrations, mechanical seals and other components.
Published: (2014)

Potential containment leak paths through hydrogen analyzers.
Published: (1996)

Containment concrete surface condition examination frequency and acceptance criteria.
Published: (2010)

Degradation of containment isolation capability by a high-energy line break.
Published: (1989)

Inoperable containment atmosphere sensing systems.
Published: (1983)

The Role of nuclear reactor containment in severe accidents : report /
Published: (1989)

Debris in containment and the residual heat removal system.
Published: (1994)

Improper closure of primary containment access hatches.
Published: (1979)

Mark I containment long-term program.
Published: (1980)

Potential blockage of safety-related strainers by material brought inside containment.
Published: (1995)

Effects of degradation on the severe accident consequences for a PWR plant with a reinforced concrete containment vessel /
by: Petti, J. P.
Published: (2013)

Inservice inspection programs for prestressed concrete containment structures.
Published: (1980)

Acceptance criteria for the Mark I containment long term program.
Published: (1979)

Deficiencies In outside containment flooding protection.
Published: (1987)

Schedule for implementation and resolution of Mark I containment long term program.
Published: (1979)

Isolation of reactor coolant system from low-pressure systems outside containment.
Published: (1984)

Advances in containment design and analysis : presented at ASME/ANS joint conference, Portland, Oregon, July 26-28, 1982 /
Published: (1982)

Confirmatory requirements relating to condensation oscillation loads for the Mark I containment long term program.
Published: (1979)

Inadvertent isolation of containment spray systems.
Published: (1984)

New information regarding insulation material performance and debris blockage of PWR containment sumps.
Published: (1990)

Breach of containment integrity.
Published: (1979)

Environmental qualification deficiency for cables and containment penetration pigtails.
Published: (1997)

Design of the reactor containment systems in nuclear power plants : a safety guide.
Published: (1985)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

Potential for degradation of the emergency core cooling system and the containment spray system after a loss-of-coolant accident because of construction and protective coating deficiencies and foreign material in containment.
Published: (1998)

Shield building concrete subsurface laminar cracking caused by moisture intrusion and freezing.
Published: (2013)

Containment structures of U.S. nuclear power plants : background, regulations, codes and standards, and other considerations /
by: Ashar, Hansraj
Published: (2013)