Steam generator channel head and tubesheet degradation.

Steam generator feedwater distribution piping damage.
Published: (1991)

Second U.S. Nuclear Regulatory Commission international steam generator tube integrity research program : final project summary report /
Published: (2003)

Degradation of steam generator internals.
Published: (1997)

Tube-to-tube contact resulting in wear in once-through steam generators.
Published: (2012)

Cracking of the upper shell-to-transition cone girth welds in steam generators.
Published: (1990)

Steam generator tube ruptures at two PWR facilities.
Published: (1979)

Potential failure of Westinghouse steam generator tube mechanical plugs.
Published: (1989)

Congressional request for information concerning steam generator tube integrity.
Published: (1982)

Operation with steam generator tubes seriously degraded.
Published: (1992)

Draft NUREG-1477, "Voltage-based interim plugging criteria for steam generator tubes".
Published: (1993)

Problems with the reliable detection of intergranular attack (IGA) of steam generator tubing.
Published: (1991)

Steam generators for nuclear power plants /
Published: (2025)

Potential problem with main steamline break analysis for main steam vaults/tunnels.
Published: (1993)

Steam Generators for Nuclear Power Plants.
by: Riznic, Jovica
Published: (2017)

Industrial boilers and heat recovery steam generators : design, applications, and calculations /
by: Ganapathy, V.
Published: (2003)

Industrial Boilers and Heat Recovery Steam Generators: Vol. 149: Design, Applications, and Calculations.
by: Ganapathy, V.
Published: (2002)

Potential steam generator related generated requirements.
Published: (1982)

Steam line break analysis using RELAP5/MOD3.3 for steam generator blowdown load assessment /
by: Jung, Han-Sik
Published: (2017)

Recent incidents involving rapid increases in primary-to-secondary leak rate.
Published: (1991)

Buildup of deposits in steam generators.
Published: (2007)

Feedwater line break analysis using RELAP5/MOD3.3 for steam generator blowdown load assessment /
by: Jung, Han-Sik
Published: (2016)

Steam generator tube inspection techniques.
Published: (1997)

Steam generator tube integrity and associated technical specifications.
Published: (2006)

Supplemental information to Generic Letter 95-03 "Circumferential cracking of steam generator tubes".
Published: (1995)

Steam generator tube integrity issues : pressurization rate effects, failure maps, leak rate correlation models, and leak rates in restricted areas /
Published: (2009)

Potential inconsistency in the assessment of the radiological consequences of a main steam line break associated with the implementation of steam generator tube voltage-based repair criteria.
Published: (1997)

Crack growth in steam generator girth welds.
Published: (1985)

Tube leakage due to a fabrication flaw in a replacement steam generator.
Published: (2004)

Stability of circumferential flaws in once-through steam generator tubes under thermal loading during LOCA, MSLB, and FWLB /
by: Majumdar, S. (Saurindranath)
Published: (2017)

Steam generator tube degradation at Diablo Canyon.
Published: (2003)

Non-destructive and failure evaluation of tubing from a retired steam generator /
Published: (2007)

Circumferential cracking of steam generator tubes.
Published: (1995)

Internal combustion and steam plant in combination.
Published: (1987)

Weaknesses in plant-specific emergency operating procedures for refilling the secondary side of dry once-through steam generators.
Published: (1997)

Weakness in emergency operating procedures found as result of steam generator tube rupture.
Published: (1993)

Chemical cleaning of steam generators at Millstone 2.
Published: (1985)