Cover Image

Potential design deficiency in motor-operated valve control circuitry.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, DC : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation : Office of New Reactors, 2013.
Series:	NRC information notice ; 2013-14.
Subjects:	Nuclear power plants > Piping > Valves > Defects. Nuclear power plants > Electric equipment.
Online Access:	https://purl.fdlp.gov/GPO/gpo157496

Similar Items

Potential deficiencies in environmental qualification of Limitorque motor valve operator wiring.
Published: (1986)

Potential deficiency in motor-operated valve control circuits and annunciation.
Published: (1984)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Inadequacies in the design of DC motor-operated valves.
Published: (1988)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Potential deficiency in improperly rated field wiring to solenoid valves.
Published: (1984)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Vibration-induced valve failures.
Published: (1983)

Potentially undersized valve actuators.
Published: (1988)

Check valve failures.
Published: (1981)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Recent NRC-sponsored testing of motor-operated valves.
Published: (1989)

Results of NRC-sponsored testing of motor-operated valves.
Published: (1990)

Failures of Rockwell International globe valves.
Published: (1984)

Failures of nut-locking devices in check-valves.
Published: (1993)

Failure of DC motor-operated valves to develop rated torque because of improper cable sizing.
Published: (1989)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)

Recent Identified problems with Limitorque motor operators.
Published: (1986)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Failure of soft seat valve seals.
Published: (1984)

Horizontally-installed motor-operated gate valves.
Published: (1992)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Deficiency in design modification to address faliures of Hiller actuators upon a gradual loss of air pressure.
Published: (1992)

Main steam isolation valve (MSIV) leakage.
Published: (1982)

Potentially substandard valve replacement parts.
Published: (1988)

Failure of yokes installed on Walworth gate and globe valves.
Published: (1993)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Check valve failures on diesel generator engine cooling system.
Published: (1982)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Valve stem corrosion failures.
Published: (1985)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Motor-operated valve actuator thrust variations measured with a torque thrust cell and a strain gage.
Published: (1993)