Crack-like indications at dents/dings and in the freespan region of thermally treated alloy 600 steam generator tubes.

Indications in thermally treated alloy 600 steam generator tubes and tube-to-tubesheet welds.
Published: (2005)

Unanticipated crack in a particular heat of alloy 600 used for Westinghouse mechanical plugs for steam generator tubes.
Published: (1994)

Axial outside-diameter cracking affecting thermally treated alloy 600 steam generator tubing.
Published: (2002)

Potential inconsistency in the assessment of the radiological consequences of a main steam line break associated with the implementation of steam generator tube voltage-based repair criteria.
Published: (1997)

Degradation of steam generator internals.
Published: (1997)

Failure to detect freespan cracks in PWR steam generator tubes.
Published: (2003)

Steam generator tube end cracking.
Published: (1998)

Cracking of the upper shell-to-transition cone girth welds in steam generators.
Published: (1990)

Non-destructive and failure evaluation of tubing from a retired steam generator /
Published: (2007)

Resolution of Generic Safety Issue 188 : steam generator tube leaks or ruptures concurrent with containment bypass from main steam line or feedwater line breaches /
by: Reichelt, E.
Published: (2009)

Control of cracking in concrete structures /
Published: (2001)

Report on thermal and volume change effects on cracking of mass concrete /
Published: (2007)

U.S. operating experience with thermally treated alloy 600 steam generator tubes through December 2013 /
by: Karwoski, K. J. (Kenneth J.)
Published: (2016)

Thermal fatigue cracking of feedwater piping to steam generators.
Published: (1993)

Brittle-like cracking in plastic pipe for gas service.
Published: (1998)

Causes, evaluation and repair of cracks in concrete structures /
Published: (1998)

Stress corrosion cracking in PWR steam generator tubes.
Published: (1990)

Voltage based repair criteria for Westinghouse steam generator tubes affected by outside diameter stress corrosion cracking.
Published: (1995)

Weakness in emergency operating procedures found as result of steam generator tube rupture.
Published: (1993)

Intergranular stress corrosion cracking leading to steam generator tube failure.
Published: (1984)

Cracks in stiffening rings on 48-Inch-diameter UF6 cylinders.
Published: (1987)

Axial (longitudinal) oriented cracking in piping.
Published: (1980)

Unisolable crack in high-pressure injection piping.
Published: (1997)

Generic activity A-10 BWR cracks.
Published: (1980)

Recent foreign and domestic esperience with degradation of steam generator tubes and internals.
Published: (2001)

Degradation in small-radius u-bend regions of steam generator tubes.
Published: (1997)

Potential for stress corrosion cracking in steam generator tube plugs supplied by Babcock and Wilcox.
Published: (1989)

U.S. operating experience with thermally treated alloy 600 steam generator tubes /
by: Karwoski, K. J.
Published: (2003)

Cracking in low pressure turbine discs.
Published: (1979)

Assessment of eddy current testing for the detection of cracks in cast stainless steel reactor piping components /
Published: (2007)

Operational experience on steam generator tube leaks and tube ruptures.
Published: (1994)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

Potential loss of redundant safety-related equipment because of the lack of high-energy line break barriers.
Published: (2000)

Steam generator tube inspection techniques.
Published: (1997)

A report on a failure of 100% paved corrugated metal pipe in Salinas, California /
by: Heyward, Harvey C.
Published: (1959)

Cracking In feedwater lines.
Published: (1979)