Use of seal cap enclosures to mitigate leakage from joints that use A-286 bolts.

"Bolting degration or failure in nuclear power plants".
Published: (1991)

Bolted connection strength and bolt hold size /
by: Wilkinson, Thomas Lee
Published: (1993)

A laboratory method of measuring slip in bolted connections /
by: Moss, D. S.
Published: (1968)

Choice of technique in bolt and nut manufacture /
by: McBain, N. S.
Published: (1982)

Bolted-connection design /
by: Soltis, Lawrence A.
Published: (1987)

Fatigue of anchor bolts /
by: Frank, Karl H.
Published: (1978)

Comparative evaluation of conventional and resin bolting systems /
by: Karabin, George J., et al.
Published: (1976)

Development length for anchor bolts /
by: Breen, J. E. (John Edward), 1932-
Published: (1964)

Handbook of bolts and bolted joints /
Published: (2025)

Bolts, nuts & screws ; a collection of practical discussions on engineering /
by: Peterka, August E. R., 1900-
Published: (1941)

Stress corrosion cracking of reactor coolant pump bolts.
Published: (1990)

Tightening of high strength metric bolts /
by: Gilroy, Michael J.
Published: (1997)

Axial tension fatigue strength of anchor bolts /
by: Fischer, Franklin L.
Published: (1977)

The design and construction of a strain-gaged resin bolt for the measurement of in-situ axial loads /
by: Sawyer, Stephen Gerard, et al.
Published: (1976)

Analysis of bolted joints-1999 : presented at the 1999 ASME Pressure Vessels and Piping Conference : Boston, Massachusetts, August 1-5, 1999 /
Published: (1999)

Analysis of bolted joints, 2000 : presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000 /
Published: (2000)

A guide to the selection of high-strength anchor bolt materials /
by: Hasselwander, Gerard B.
Published: (1974)

Potential problems with the use of freeze seals.
Published: (1991)

Strength and behavior of anchor bolts embedded near edges of concrete piers /
by: Hasselwander, Gerard B.
Published: (1977)

Cracking of reactor vessel internal baffle former bolts in foreign plants.
Published: (1998)

Recommendations and suggestions of Bureau of Standards regarding standards for bolt heads, nuts, and screw heads.
Published: (1922)

Failure of steam generator support bolting.
Published: (1980)

Handbook of bolts and bolted joints /
Published: (1998)

Specification for structural joints using ASTM A325 or A490 bolts /
Published: (1980)

Square, hex, heavy hex, and askew head bolts and hex, heavy hex, hex flange, lobed head, and lag screws (inch series) /
Published: (2013)

New-York Screw Bolt Mills.
Published: (1849)

Turn-of-the-nut tightening of anchor bolts /
by: Richards, Jason Halbert, 1979-
Published: (2004)

Bolt, nut and rivet standards /
Published: (1941)

Field verification of load transfer mechanics of fully grouted roof bolts /
by: Signer, S. P. (Stephen P.)
Published: (1990)

Failure of soft seat valve seals.
Published: (1984)

Use of sealing compounds in an operating system.
Published: (1985)

Tightening procedures for large-diameter anchor bolts /
Published: (1997)

Plow bolts.
Published: (1925)

Counterfeit bolts and fasteners : hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundred First Congress, first session, April 5, 1989.
Published: (1989)

Bent anchor bolts in boiling water reactor torus supports.
Published: (1989)

Strength of bolted timber connections with steel side members /
by: Wilkinson, Thomas Lee
Published: (1992)