Steel containment degradation and associated license renewal aging management issues.

Degradation of steel containments.
Published: (1986)

Degraded coatings and corrosion of steel containment vessels.
Published: (1989)

Materials' ageing and degradation in light water reactors : mechanisms and management /
Published: (2013)

Degradation of leak-chase channel systems for floor welds of metal containment shell and concrete containment metallic liner.
Published: (2014)

Corrosion of steel containment and containment liner.
Published: (2004)

Containment liner corrosion.
Published: (2010)

Risk-informed assessment of degraded containment vessels /
Published: (2006)

Shield building concrete subsurface laminar cracking caused by moisture intrusion and freezing.
Published: (2013)

The Role of nuclear reactor containment in severe accidents : report /
Published: (1989)

Torus shells with corrosion and degraded coatings in BWR containments.
Published: (1988)

Isolation of reactor coolant system from low-pressure systems outside containment.
Published: (1984)

Potential blockage of safety-related strainers by material brought inside containment.
Published: (1995)

Effects of degradation on the severe accident consequences for a PWR plant with a reinforced concrete containment vessel /
by: Petti, J. P.
Published: (2013)

Inoperable containment atmosphere sensing systems.
Published: (1983)

Debris in containment and the residual heat removal system.
Published: (1994)

Improper closure of primary containment access hatches.
Published: (1979)

Mark I containment long-term program.
Published: (1980)

Acceptance criteria for the Mark I containment long term program.
Published: (1979)

Degradation of containment isolation capability by a high-energy line break.
Published: (1989)

Schedule for implementation and resolution of Mark I containment long term program.
Published: (1979)

Aluminum chemistry in a prototypical post-loss-of-coolant-accident, pressurized-water-reactor containment environment /
Published: (2006)

Confirmatory requirements relating to condensation oscillation loads for the Mark I containment long term program.
Published: (1979)

New information regarding insulation material performance and debris blockage of PWR containment sumps.
Published: (1990)

Final results of the hydrogen igniter experimental program /
by: Lowry, W. E., et al.
Published: (1982)

Safeguards techniques and equipment.
Published: (2011)

Deficiencies In outside containment flooding protection.
Published: (1987)

Advances in containment design and analysis : presented at ASME/ANS joint conference, Portland, Oregon, July 26-28, 1982 /
Published: (1982)

Degradation of reactor coolant pump studs.
Published: (1980)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

Containment integrated leak rate tests.
Published: (1985)

Assessment and management of ageing of major nuclear power plant components important to safety : BWR pressure vessel internals.
Published: (2005)

Potential common-mode post-accident failure of containment coolers.
Published: (1996)

Design of the reactor containment systems in nuclear power plants : a safety guide.
Published: (1985)

Installation of a hardened wetwell vent.
Published: (1989)

Potential for degradation of the emergency core cooling system and the containment spray system after a loss-of-coolant accident because of construction and protective coating deficiencies and foreign material in containment.
Published: (1998)

Inadvertent isolation of containment spray systems.
Published: (1984)