Cover Image

Fixed gauge shutter failures due to operating in harsh working environments.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, DC : United States. Nuclear Regulatory Commission, Office of Federal and State Materials and Environmental Management Programs, 2011.
Series:	NRC information notice ; 2011-09.
Subjects:	Pressure gages > Defects. Nuclear power plants > Instruments > Defects.
Online Access:	https://purl.fdlp.gov/GPO/gpo157142

Similar Items

Performance of required shutter checks and reporitng of gauge shuttle failures.
Published: (2009)

Failures in turbine exhaust lines.
Published: (1982)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Safety injection pipe failure.
Published: (1988)

Failure of ITE model K-600 circuit breaker.
Published: (1981)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Failures of General Electric type HFA relays.
Published: (1982)

Check valve failures.
Published: (1981)

Failures of Rockwell International globe valves.
Published: (1984)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Failure of steam generator primary side manway closure studs.
Published: (1982)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Sheared pinion gear-to-shaft keys in Limitorque motor actuators.
Published: (1990)

Defective motor shaft keys in Limitorque motor actuators.
Published: (1988)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Incorrect configuration of breaker operating springs in General Electric AK-Series metal-clad circuit breakers.
Published: (1991)

Failures of Class 1E safety-related switchgear circuit breakers to close on demand.
Published: (1983)

Defects in load-bearing welds on lifting devices for vessel head and internals.
Published: (1983)

Failure of automatic sprinkler system valves to operate.
Published: (1984)

Failures of AGASTAT CR 0095 relay sockets.
Published: (1982)

Update of failure of automatic sprinkler system valves to operate.
Published: (1986)

Failures of Hiller actuators upon gradual loss of air pressure.
Published: (1982)

Potential loss of safe shutdown equipment due to premature silicon controlled rectifier failure.
Published: (1988)

Pipe cracks in stagnant borated water systems at PWR plants.
Published: (1979)

Mechanical failure of indicating-type fuses.
Published: (1987)

Failure of soft seat valve seals.
Published: (1984)

Vibration-induced valve failures.
Published: (1983)

Failures of the undervoltage, trip function of reactor trip system breakers.
Published: (1983)

Failures of nut-locking devices in check-valves.
Published: (1993)

Electrical component failure due to degradation of polyvinyl chloride wire insulation.
Published: (1994)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Potentially substandard slip-on, welding neck, and blind flanges.
Published: (1992)

Failure of yokes installed on Walworth gate and globe valves.
Published: (1993)

Compliance with 10 CFR Part 21, "Reporting of Defects and Noncompliance".
Published: (1991)

Check valve failures on diesel generator engine cooling system.
Published: (1982)

Defect in safety-related pump parts due to inadequate heat treatment.
Published: (1995)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

Station battery problems.
Published: (1985)

Potential problems in identifying causes of emergency diesel generator malfunctions.
Published: (1991)

Potential failure of fire water supply pumps to automatically start due to a fire.
Published: (2009)