Cover Image

Periodic verification of leak tight integrity of pressure isolation valves.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C : United States Nuclear Regulatory Commission, 1987.
Series:	Generic letter ; 87-06.
Subjects:	Nuclear power plants > Piping > Valves.
Online Access:	https://purl.fdlp.gov/GPO/gpo155753

Similar Items

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Failures of main steam isolation valves.
Published: (1988)

Malfunction of a pressurized code safety valve.
Published: (1993)

Direction-dependent leak characteristics of containment purge valves.
Published: (1988)

Primary containment isolation valve discrepancies.
Published: (1983)

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Valve stem corrosion failures.
Published: (1985)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

LWR primary coolant system pressure isolation valves.
Published: (1980)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

Leak of reactor water to reactor building caused by scram solenoid valve problem.
Published: (1985)

Changes In pressurizer safety valve setpoints before installation.
Published: (1991)

Failures of main steam isolation check valves resulting in disc separation.
Published: (1990)

Failure of main steam isolation valves as a result of sticking solenoid pilot valves.
Published: (1995)

Multiple-subsequent actuation of safety/relief valves following an isolation event.
Published: (1978)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Problems with Copes-Vulcan pressurized power-operated relief valves.
Published: (1994)

Pressure locking of motor-operated flexible wedge gate valves.
Published: (1992)

Main steam isolation valve (MSIV) leakage.
Published: (1982)

Failure of auxiliary feedwater manual isolation valve.
Published: (1986)

Main steam isolation valve failure events.
Published: (2015)

Failure to close service water cross-connect isolation valves.
Published: (1989)

Check valve problems.
Published: (1982)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

Potentially substandard valve replacement parts.
Published: (1988)

Pressurizer safety valve reliability.
Published: (1986)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Periodic verification of design-basis capability of safety-related motor-operated valves.
Published: (1996)

Velan swing check valves.
Published: (1981)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Failure of air check valves to seat.
Published: (1985)

Nozzle ring settings on low pressure water-relief valves.
Published: (1992)

Main steam isolation valve closure logic.
Published: (1985)

Inaccuracy of safety valve set pressure determinations using assist devices.
Published: (1994)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Valve body erosion.
Published: (1989)