Implementation of TMI action item II.K.3.5, "Automatic trip of reactor coolant pumps".

Excessive reactor coolant leakage following a seal failure in a reactor coolant pump or reactor recirculation pump.
Published: (1993)

Degradation of reactor coolant pump studs.
Published: (1980)

Determination of Westinghouse reactor coolant pump seal failure.
Published: (1993)

Monitoring vibration to detect circumferential cracking of reactor coolant pump and reactor recirculation pump shafts.
Published: (2005)

Failures of RHR pump motors and pump internals.
Published: (1986)

Stress corrosion cracking of reactor coolant pump bolts.
Published: (1990)

Potential for residual heat removal pump damage caused by parallel pump interaction.
Published: (1990)

Clarification of TMI action plan item II.k.3.31.
Published: (1983)

Potential RHR pump loss.
Published: (1987)

Failures of reactor coolant pump thermal barriers and check valves in foreign plants.
Published: (1997)

Loss of flow from the residual heat removal pump during refueling cavity breakdown.
Published: (1992)

Second reactor coolant pump shaft failure at Crystal River.
Published: (1989)

Failure of residual heat removal pump bearings due to high thrust loading.
Published: (1993)

Reactor coolant pump lube oil fire.
Published: (1994)

Part 21--inadequately staked capscrew renders residual heat removal pump inoperable.
Published: (2003)

Reactor coolant pump shaft failure at Crystal River.
Published: (1986)

Charging pump trip during a loss-of-coolant event caused by low suction pressure.
Published: (1994)

Potential for common-mode failure of high pressure safety injection pumps or release of reactor coolant outside containment during a loss-of-coolant accident.
Published: (1990)

Undetected loss of reactor coolant.
Published: (1987)

Overpressurization of reactor coolant system.
Published: (1982)

Coolant technology of water cooled reactors : an overview.
Published: (1993)

Undetected accumulation of gas in reactor coolant system.
Published: (1994)

Emergency net positive suction head of emergency core cooling and containment heat removal pumps under design basis accident conditions.
Published: (1996)

Assurance of sufficient net positive suction head for emergency core cooling and containment heat removal pumps.
Published: (1997)

Assessment of a reactor coolant pump trip for TRILLO NPP with RELAP5/MOD3.2 /
by: Lozano, M. F.
Published: (2000)

Depressurization of reactor coolant systems in pressurized-water reactors.
Published: (1987)

Inter-system discharge of reactor coolant.
Published: (1990)

Failure of the bolt-locking device on the reactor coolant pump turning vane.
Published: (1995)

Centrifugal pumps for sodium cooled reactors /
by: Kale, R. D., et al.
Published: (2024)

Organic liquids as reactor coolants and moderators. : Report of a panel, held in Vienna, 9-13 May, 1966 /
Published: (1967)

Loss of decay heat removal due to loss of fluid levels in reactor coolant system.
Published: (1986)

Loss of high head safety injection emergency boration and reactor coolant makeup capability.
Published: (1982)

Inadequate control of reactor coolant system conditions during shutdown.
Published: (1993)

Recent operating experience on loss of reactor coolant inventory while In a shutdown condition.
Published: (1990)

Recent events involving reactor coolant system inventory control during shutdown.
Published: (1997)

Isolation of reactor coolant system from low-pressure systems outside containment.
Published: (1984)