Implementation of regulatory guide 1.150, Ultrasonic testing of reactor vessel welds during preservice and inservice examinations, revision 1.
| Format: | Government Document eBook |
|---|---|
| Language: | English |
| Published: |
Washington, D.C. :
United States Nuclear Regulatory Commission,
1983.
|
| Series: | Generic letter ;
no. 83-15. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/gpo155093 |
Similar Items
Surface crack and subsurface indications in the weld of a reactor vessel head.
Published: (1990)
Published: (1990)
Methodology for estimating fabrication flaw density and distribution, reactor pressure vessel welds /
by: Schuster, G. J.
Published: (2009)
by: Schuster, G. J.
Published: (2009)
Cracks in shroud support access hole cover welds.
Published: (1988)
Published: (1988)
Hydrogen gas burn inside pressurizer during welding.
Published: (1994)
Published: (1994)
Irradiation Embrittlement of Reactor Pressure Vessels in Nuclear Power Plants.
Published: (2014)
Published: (2014)
Welding defects in replacement steam generators.
Published: (2010)
Published: (2010)
Defects in load-bearing welds on lifting devices for vessel head and internals.
Published: (1983)
Published: (1983)
Guide to the periodic inspection of nuclear reactor steel pressure vessels. : Report of a meeting on periodic inspection of nuclear reactor steel pressure vessels held in Stockholm, Sweden, 21-25 Oct. 1968.
Published: (1969)
Published: (1969)
Flaw assessment in pressure equipment and welded structures : PD6493 to BS7910 /
Published: (2000)
Published: (2000)
Master curve approach to monitor fracture toughness of reactor pressure vessels in nuclear power plants.
Published: (2009)
Published: (2009)
Recurring inspection of nuclear reactor steel pressure vessels. : Report of a Panel, held in Pilsen, Czechoslovak Socialist Republic, 3-7 Oct. 1966 /
Published: (1968)
Published: (1968)
International review of nuclear reactor pressure vessel surveillance programs /
Published: (2018)
Published: (2018)
Dynamic range uncertainties in the reactor vessel level instrumentation.
Published: (1997)
Published: (1997)
Recent experience with degradation of reactor pressure vessel head.
Published: (2002)
Published: (2002)
Inadvertent reactor vessel overfill.
Published: (1988)
Published: (1988)
Boiling water reactor licensees use of the BWRVIP-05 report to request relief from augmented examination requirements on reactor pressure vessel circumferential shell welds.
Published: (1998)
Published: (1998)
Possible indicators of ongoing reactor pressure vessel head degradation.
Published: (2002)
Published: (2002)
Design of reactor containment systems for nuclear power plants : Safety guide /
Published: (2004)
Published: (2004)
Thermal shock to reactor pressure vessels.
Published: (1981)
Published: (1981)
Design of the reactor pressure vessel support system.
Published: (1978)
Published: (1978)
Pressure vessel codes : their application to nuclear reactor systems /
Published: (1966)
Published: (1966)
Quasi-laminar indicators in reactor pressure vessel forgings.
Published: (2013)
Published: (2013)
Primary water stress corrosion cracking of high-chromium, nickel-base welds near dissimilar metal weld interfaces /
by: Alexandreanu, B.
Published: (2018)
by: Alexandreanu, B.
Published: (2018)
Reliability of reactor pressure components : proceedings of an International Symposium on Reliability of Reactor Pressure Components /
Published: (1983)
Published: (1983)
Reactor vessel atypical weld material.
Published: (1978)
Published: (1978)
Guidelines for application of the master curve approach to reactor pressure vessel integrity in nuclear power plants.
Published: (2005)
Published: (2005)
Trends in reactor pressure vessel and circuit development /
Published: (1980)
Published: (1980)
Failure to properly pressure test reactor vessel flange leak-off lines.
Published: (2014)
Published: (2014)
Regulatory guide 1.190 : calculational and dosimetry methods for determining pressure vessel neutron fluence.
Published: (2001)
Published: (2001)
Resolution of generic issue 79, "Unanalyzed reactor vessel (PWR) thermal stress during natural convection cooldown".
Published: (1992)
Published: (1992)
Improper seating of reactor vessel surveillance capsules.
Published: (2016)
Published: (2016)
Assuring structural integrity of steel reactor pressure vessels /
Published: (1980)
Published: (1980)
NUREG-0744 rev, 1, pressure vessel material fracture toughness.
Published: (1982)
Published: (1982)
Pressurized thermal shock in nuclear power plants : good practices for assessment : deterministic evaluation for the integrity of reactor pressure vessel.
Published: (2010)
Published: (2010)
Analysis of the behaviour of advanced reactor pressure vessel steels under neutron irradiation : final report of IAEA co-ordinated research programme, 1977-1983.
Published: (1986)
Published: (1986)
NRC position on radiation embrittlement of reactor vessel materials and its impact on plant operations.
Published: (1988)
Published: (1988)
Post-refueling outage reactor pressure vessel leak testing before core criticality.
Published: (1998)
Published: (1998)
Radiation embrittlement and surveillance of nuclear reactor pressure vessels : an international study : a conference /
Published: (1983)
Published: (1983)
Severe accidents and other topics in the RPV design, 2000 : presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000 /
Published: (2000)
Published: (2000)
Partial bypass of shutdown cooling flow from the reactor vessel.
Published: (1996)
Published: (1996)