Cover Image

IEB 80-23 failures of solenoid valves manufactured by Valcor Engineering Corporation.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Atlanta, Georgia : United States Nuclear Regulatory Commission, Region II, 1980.
Series:	Generic letter ; 80-97.
Subjects:	Nuclear power plants > Piping > Valves > Defects. Solenoids. Valcor Engineering Corporation.
Online Access:	https://purl.fdlp.gov/GPO/gpo154427

Similar Items

Malfunction of solenoid valves manufactured by VALCOR Engineering Corporation.
Published: (1980)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Potential deficiency in improperly rated field wiring to solenoid valves.
Published: (1984)

Solenoid valve problems.
Published: (1988)

Solenoid-operated valve failures resulted in turbine overspeed.
Published: (1991)

Operating problems with solenoid operated valves at nuclear power plants.
Published: (1986)

Qualification life of solenoid valves.
Published: (1989)

Results of the NRC-sponsored qualification methodology research test on ASCO solenoid valves.
Published: (1984)

Possible sticking of ASCO solenoid valves.
Published: (1985)

Scram solenoid pilot valve (SSSPV) rebuild kit problems.
Published: (1986)

Potential effect of line-induced vibration on certain target rock solenoid-operated valves.
Published: (1985)

Reduced service life of Automatic Switch Company (ASCO) solenoid valves with Buna-N material.
Published: (2003)

Leak of reactor water to reactor building caused by scram solenoid valve problem.
Published: (1985)

Operating experience feedback report, solenoid-operated valve problems at U.S. reactors.
Published: (1991)

Check valve failures.
Published: (1981)

Failures of nut-locking devices in check-valves.
Published: (1993)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Failures of Rockwell International globe valves.
Published: (1984)

Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)

Failure of soft seat valve seals.
Published: (1984)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

IEB 80-21 valve yokes supplied by Malcolm Foundry Company, Inc.
Published: (1980)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Failure of yokes installed on Walworth gate and globe valves.
Published: (1993)

Failure of Borg-Warner gate valves to close against differential pressure.
Published: (1989)

Check valve failures on diesel generator engine cooling system.
Published: (1982)

Failure of main steam isolation valves as a result of sticking solenoid pilot valves.
Published: (1995)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Vibration-induced valve failures.
Published: (1983)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Failure 17-7 PH stainless steel springs in Valcor valves due to hydrogen embrittlement.
Published: (1986)

Main steam isolation valve (MSIV) leakage.
Published: (1982)

Diaphragm failure in scram outlet valve causing rod insertion.
Published: (1986)

Valve stem corrosion failures.
Published: (1985)

Failure of safety/relief valves to open at BWR--final report.
Published: (1983)