Cover Image

IEB 80-21 valve yokes supplied by Malcolm Foundry Company, Inc.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1980.
Series:	Generic letter ; 80-92.
Subjects:	Nuclear power plants > Piping > Valves.
Online Access:	https://purl.fdlp.gov/GPO/gpo154422

Similar Items

IEB 80-23 failures of solenoid valves manufactured by Valcor Engineering Corporation.
Published: (1980)

IEB 80-01 operability of ADS valve pneumatic supply.
Published: (1980)

Failure of yokes installed on Walworth gate and globe valves.
Published: (1993)

Valve stem corrosion failures.
Published: (1985)

IEB 85-03 evaluation of motor-operators identifies improper torque switch settings.
Published: (1986)

Check valve problems.
Published: (1982)

Potentially substandard valve replacement parts.
Published: (1988)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Velan swing check valves.
Published: (1981)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Failure of air check valves to seat.
Published: (1985)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Valve body erosion.
Published: (1989)

Check valve failures.
Published: (1981)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Malfunction of a pressurized code safety valve.
Published: (1993)

Failures of nut-locking devices in check-valves.
Published: (1993)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Failures of main steam isolation valves.
Published: (1988)

Failures of Rockwell International globe valves.
Published: (1984)

Valve-stem failure caused by embrittlement.
Published: (1992)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Misapplication of valves by throttling beyond design range.
Published: (1983)

Check valve inservice testing program deficiencies.
Published: (1988)

Problems with incorrectedly-installed swing-check valves.
Published: (2001)

Testing and operations-induced degradation of 3-stage Target Rock safety/relief valves.
Published: (2018)