IEB 80-17 supplement 1 failure of control rods to insert during a scram at a BWR.

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1985)

Alternate rod Insertion for BWR scram represents a potential path for loss of primary coolant.
Published: (1981)

BWR post-scram drywell pressurization.
Published: (1984)

BWR scram discharge system, clarification of diverse instrumentation requirement.
Published: (1981)

Torus shells with corrosion and degraded coatings in BWR containments.
Published: (1988)

Suppression pool temperature limits for BWR containments : generic technical activity A-39 /
by: Su, T. M.
Published: (1981)

Potential failure of BWR backup manual scram capability.
Published: (1980)

Investigation of distorted-geometry simulation of pool dynamics in horizontal-vent BWR containments /
by: Ruggieri, N. G., et al.
Published: (1980)

IEB 80-07 BWR jet pump assembly failure.
Published: (1980)

Potential for unacceptable interaction between the control rod drive scram function and non-essential control air at certain GE BWR facilities.
Published: (1980)

BWR control rod failures.
Published: (1980)

Hydrogen combustion events in foreign BWR piping.
Published: (2002)

Safety/relief valve quencher loads : evaluation for BWR Mark II and III containments.
Published: (1982)

Vacuum relief system for boiling water reactor Mark I and Mark II containments.
Published: (1985)

The alternate mitigation strategies study of Chinshan BWR/4 by using the LOCA and SBO analysis of TRACE /
by: Wang, Jong-Rong
Published: (2014)

Partial plugging of suppression pool strainers at a foreign BWR.
Published: (1992)

BWR feedwater nozzle and control rod drive return line nozzle cracking (NUREG-0619).
Published: (1981)

Implementation of NUREG-0313, technical report on material selection & processing GL for BWR coolant press boundary piping.
Published: (1981)

BWR anticipated transients without scram in the MELLLA+ expanded operating domain /
by: Cheng, Lap-Yan
Published: (2015)

Potential failure of all control rod groups to insert in a bolling water reactor due to a fire.
Published: (2007)

BWR high-pressure coolant injection (HPCI) initiation seal-in and indication.
Published: (1984)

Generic activity A-10 BWR cracks.
Published: (1980)

Torus cracking in a BWR mark 1 containment.
Published: (2006)

BWR ECCS pump suction concerns following a LOCA /
by: Krotiuk, W. J.
Published: (2016)

Potential problems with BWR level instrumentation backfill modifications.
Published: (1993)

Failures of scram discharge volume vent and drain valves.
Published: (1986)

Modifications to boiling water reactor control rod drive systems.
Published: (1980)

Guidebook to light water reactor safety analysis /
Published: (1985)

BWR operation with indicated flow less than natural circulation.
Published: (1996)

Thermal stratification of water in BWR reactor vessels.
Published: (1993)

The establishment and assessment of Chinshan (BWR/4) Nuclear Power Plant TRACE/SNAP model /
by: Wang, Jong-Rong
Published: (2014)

Design vulnerability in BWR reactor vessel level instrumentation backfill modification.
Published: (2002)

The development and application of Kuosheng (BWR/6) nuclear power plant TRACE/SNAP model /
by: Shih, Chunkuan
Published: (2014)