Thimble tube thinning in Westinghouse reactors.

Steam generator tube inspection techniques.
Published: (1997)

Unexpected restriction to thermal growth of reactor coolant piping.
Published: (1992)

Westinghouse motor-operated valve performance data supplied to nuclear power plant licensees.
Published: (1992)

Steam generator tube integrity and associated technical specifications.
Published: (2006)

High-energy piping failures caused by wall thinning.
Published: (1991)

Final report on advanced nondestructive evaluation for steam generator tubing for the Second International Steam Generator Tube Integrity Program /
Published: (2003)

Supplemental information to Generic Letter 95-03 "Circumferential cracking of steam generator tubes".
Published: (1995)

Circumferential cracking of steam generator tubes.
Published: (1995)

Steam generator tube integrity issues : pressurization rate effects, failure maps, leak rate correlation models, and leak rates in restricted areas /
Published: (2009)

Safety evaluation of Westinghouse topical reports dealing with elimination of postulated pipe breaks in PWR primary main loops.
Published: (1984)

Potential for stress corrosion cracking in steam generator tube plugs supplied by Babcock and Wilcox.
Published: (1989)

Leak of reactor water to reactor building caused by scram solenoid valve problem.
Published: (1985)

Improper installation of heat shrinkable tubing.
Published: (1986)

Tube-to-tube contact resulting in wear in once-through steam generators.
Published: (2012)

Tube leakage due to a fabrication flaw in a replacement steam generator.
Published: (2004)

Weakness in emergency operating procedures found as result of steam generator tube rupture.
Published: (1993)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Assessment of eddy current testing for the detection of cracks in cast stainless steel reactor piping components /
Published: (2007)

Failure of a boiling water reactor target rock main steam safety/relief valve.
Published: (2003)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

Fabrication flaw density and distribution in repairs to reactor pressure vessel and piping welds /
by: Schuster, G. J.
Published: (2008)

Non-destructive and failure evaluation of tubing from a retired steam generator /
Published: (2007)

Requirements for steam generator tube inspections.
Published: (2004)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

In-tube steam condensation in the presence of air under transient conditions /
by: Tanrikut, A.
Published: (2007)

Inservice inspection deficiencies result in severely degraded steam generator tubes.
Published: (1994)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

Second U.S. Nuclear Regulatory Commission international steam generator tube integrity research program : final project summary report /
Published: (2003)

Steam generator tube ruptures at two PWR facilities.
Published: (1979)

Corrosion of valve-to-torque tube keys in spray pond cross connect valves.
Published: (1990)

Pipe whip restraints.
Published: (1985)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.
Published: (1995)

Use of inappropriate guidelines and criteria for nuclear piping and pipe support evaluation and design.
Published: (1995)

Valve stem corrosion failures.
Published: (1985)

Erosion-corrosion of PWR feedwater piping survey of experience, design, water chemistry, and materials /
by: Jonas, Otakar
Published: (1988)