Cover Image

Single failures in auxiliary feedwater systems.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1987.
Series:	Information notice ; no. 87-34.
Subjects:	Nuclear power plants > Piping > Valves. Feed-water pumps > Defects.
Online Access:	https://purl.fdlp.gov/GPO/gpo149363

Similar Items

Failure of auxiliary feedwater manual isolation valve.
Published: (1986)

Disablement of turbine-driven auxiliary feedwater pump due to closure of one of the parallel steam supply valves.
Published: (1989)

Failure of main feedwater check valves causes loss of feedwater system integrity and water-hammer damage.
Published: (1986)

Failure of main feedwater check valves causes loss of feedwater system integrity and water-hammer damage.
Published: (1986)

Overspeed of the turbine-driven auxiliary feedwater pumps and overpressurization of the associated piping systems.
Published: (1990)

Operating experience regarding entrainment of gas or debris into auxiliary feedwater systems.
Published: (2007)

Thermal stratification in feedwater system piping.
Published: (1991)

Significant unexpected erosion of feedwater lines.
Published: (1987)

Check valve failures.
Published: (1981)

Temporary strainers left installed in pump suction piping.
Published: (1985)

Failures of Rockwell International globe valves.
Published: (1984)

Failures of nut-locking devices in check-valves.
Published: (1993)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Failure of turbine-driven main feedwater pump to trip because of contaminated oil.
Published: (1993)

Failures of Hiller actuators upon gradual loss of air pressure.
Published: (1982)

Check valve failures on diesel generator engine cooling system.
Published: (1982)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Failure of soft seat valve seals.
Published: (1984)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

Inoperability of auxiliary and emergency feedwater auto-start circuits on loss of main feedwater pumps.
Published: (2015)

Failure of yokes installed on Walworth gate and globe valves.
Published: (1993)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Undetected unavailability of the turbine-driven auxiliary feedwater train.
Published: (1984)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

Main steam isolation valve (MSIV) leakage.
Published: (1982)

Loss of feedwater isokinetic sampling probes at Dresden units 2 and 3.
Published: (2004)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Vibration-induced valve failures.
Published: (1983)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Systems interaction event resulting in reactor system safety relief valve opening following a fire-protection deluge system malfunction.
Published: (1985)

Failure of safety/relief valves to open at BWR--final report.
Published: (1983)

Deficiency in design modification to address faliures of Hiller actuators upon a gradual loss of air pressure.
Published: (1992)

Repetitive failures of Limitorque operator SMB-4 motor-to-shaft key.
Published: (1981)

IEB 80-23 failures of solenoid valves manufactured by Valcor Engineering Corporation.
Published: (1980)

Valve stem corrosion failures.
Published: (1985)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)