Cover Image

Inadequate seismic qualification of diaphragm valves by mathematical modeling and analysis.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1987.
Series:	Information notice ; no. 87-02.
Subjects:	Nuclear power plants > Piping > Valves > Mathematical models. Diaphragms (Mechanical devices) > Mathematical models. Earthquakes.
Online Access:	https://purl.fdlp.gov/GPO/gpo148946

Similar Items

Replacement diaphragms for Robertshaw valve (model no. VC-210).
Published: (1981)

Diaphragm failure in scram outlet valve causing rod insertion.
Published: (1986)

Degradation of static "O" ring pressure switches.
Published: (1987)

Flat and Corrugated Diaphragm Design Handbook /
by: Di Giovanni
Published: (2017)

The diaphragm cell ; theory and practice of the diaphragm cell for liquid diffusion measurements /
by: Mills, R. (Reginald), 1917-
Published: (1968)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Problems with diaphragms in safety-related tanks.
Published: (1991)

Measured opening characteristics of an electromagnetically opened diaphragm for the Langley expansion tunnel /
by: Moore, John A.
Published: (1976)

The strength of stiffened box girder diaphragms /
by: Puthli, R. S.
Published: (1977)

Flat and corrugated diaphragm design handbook /
by: Di Giovanni, Mario, 1911-
Published: (1982)

Slow five percent scram insertion times caused by viton diaphragms in scram solenoid pilot valves.
Published: (1996)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

inadequate main steam safety valve (MSSV) setpoints and performance issues associated with long MSSV inlet piping.
Published: (1997)

Valve stem corrosion failures.
Published: (1985)

Qualification life of solenoid valves.
Published: (1989)

Effects of diaphragms in continuous slab and girder highway bridges /
by: Wong, A. Y. C.
Published: (1973)

Inadequate inservice testing of main steam isolation valves.
Published: (1985)

Water hammer and possible piping damage caused by misapplication of Kerotest packless metal diaphragm globe valves.
Published: (1988)

Results of the NRC-sponsored qualification methodology research test on ASCO solenoid valves.
Published: (1984)

Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)

Check valve problems.
Published: (1982)

Potentially substandard valve replacement parts.
Published: (1988)

Velan swing check valves.
Published: (1981)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Inadequate surveillance and postmaintenance and postmodification system testing.
Published: (1985)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Failure of air check valves to seat.
Published: (1985)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Potential deficiencies in environmental qualification of Limitorque motor valve operator wiring.
Published: (1986)

Valve body erosion.
Published: (1989)

Check valve failures.
Published: (1981)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Malfunction of a pressurized code safety valve.
Published: (1993)

Failures of nut-locking devices in check-valves.
Published: (1993)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Inadequate testing to detect failures of safety-related pneumatic components or systems.
Published: (1986)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)