Loss of safety injection capability.
| Format: | Government Document eBook |
|---|---|
| Language: | English |
| Published: |
Washington, D.C. :
United States Nuclear Regulatory Commission, Office of Inspection and Enforcement,
1986.
|
| Series: | Information notice ;
86-63. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/gpo148280 |
Similar Items
Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)
Published: (1991)
Flow blockage of cooling water to safety system components.
Published: (1988)
Published: (1988)
Inadequate flow of essential service water to room coolers and heat exchangers for engineered safety-feature systems.
Published: (1990)
Published: (1990)
Loss of high head safety injection emergency boration and reactor coolant makeup capability.
Published: (1982)
Published: (1982)
Safety analysis of WWER-440 nuclear power plants : potential consequences of a large primary to secondary system leakage accident.
Published: (2009)
Published: (2009)
Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)
Published: (1995)
Accident analysis for nuclear power plants with modular high temperature gas cooled reactors /
Published: (2008)
Published: (2008)
Advances in Nuclear Power Process Heat Applications.
by: Author), IAEA (Corporate
Published: (2012)
by: Author), IAEA (Corporate
Published: (2012)
Safety system response to loss of coolant and loss of offsite power.
Published: (1993)
Published: (1993)
An assessment of the emergency core cooling systems rulemaking hearing : concluding statement - safety phase /
Published: (1974)
Published: (1974)
Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)
Published: (1996)
Loss of nonsafety-related reactor coolant system instrumentation during operation.
Published: (1979)
Published: (1979)
Loss of decay heat removal capability at Davis-Besse Unit 1 while in a refueling mode.
Published: (1980)
Published: (1980)
The "calculated" loss-of-coolant accident : a review /
by: Ybarrondo, L. J.
Published: (1972)
by: Ybarrondo, L. J.
Published: (1972)
Potential for high post-accident closed-cycle cooling water temperatures to disable equipment important to safety.
Published: (1996)
Published: (1996)
Feedwater line break analysis using RELAP5/MOD3.3 for steam generator blowdown load assessment /
by: Jung, Han-Sik
Published: (2016)
by: Jung, Han-Sik
Published: (2016)
Steam line break analysis using RELAP5/MOD3.3 for steam generator blowdown load assessment /
by: Jung, Han-Sik
Published: (2017)
by: Jung, Han-Sik
Published: (2017)
Design of the reactor coolant system and associated system nuclear power plants : Safety guide /
Published: (2004)
Published: (2004)
Potential for water hammer, thermal stratification, and steam binding in high-pressure coolant Injection piping.
Published: (1989)
Published: (1989)
Numerical analysis of mixing factors in the RPV of VVER-440 reactor using the TRACE code /
by: Heralecky, P. (Petr)
Published: (2010)
by: Heralecky, P. (Petr)
Published: (2010)
Clarification of TMI action plan item II.k.3.31.
Published: (1983)
Published: (1983)
Loss of emergency boration capability due to nitrogen gas intrusion.
Published: (1987)
Published: (1987)
Computer codes for small-break loss-of-coolant accidents : a Nordic assessment : final report of the NKA project SAK-3 /
by: Rathmann, Ole
Published: (1985)
by: Rathmann, Ole
Published: (1985)
Simulation of the G3.1 Experiment at PKL Facility Using RELAP5/Mod3.3 /
by: Villanueva, J. F.
Published: (2018)
by: Villanueva, J. F.
Published: (2018)
Loss of residual heat removal caused by accumulator nitrogen injection.
Published: (1989)
Published: (1989)
Reactor coolant and associated systems in nuclear power plants : a safety guide.
Published: (1986)
Published: (1986)
WASH-1400, the reactor safety study : the introduction of risk assessment to the regulation of nuclear reactors.
by: Bartel, Reynold, et al.
Published: (2016)
by: Bartel, Reynold, et al.
Published: (2016)
RELAP5/MOD3.3 analysis of event with actuation of safety injection system at the loss of external power /
by: Proŝek, A., et al.
Published: (2015)
by: Proŝek, A., et al.
Published: (2015)
Potential for loss of post-LOCA recirculation capability due to insulation debris blockage.
Published: (1985)
Published: (1985)
Accident analysis for nuclear power plants with graphite moderated boiling water RBMK reactors.
Published: (2005)
Published: (2005)
Potential loss of solid-state instrumentation following failure of control room cooling.
Published: (1985)
Published: (1985)
Design measures to facilitate implementation of safeguards at future water cooled nuclear power plants.
Published: (1998)
Published: (1998)
Model studies and design of thermal outfall structures, Quad-Cities Nuclear Plant /
Published: (1971)
Published: (1971)
Nuclear reactor safety heat transfer /
Published: (1981)
Published: (1981)
Research reactor 'MARIA' primary cooling loop transient analysis using RELAP5 Mod 3.3 /
by: Dabrowski, M., et al.
Published: (2014)
by: Dabrowski, M., et al.
Published: (2014)
Regulatory effectiveness of unresolved safety issue (USI) A-45, "shutdown decay heat removal requirements" /
Published: (2003)
Published: (2003)
Potential clogging of high pressure safety injection throttle valves during recirculation.
Published: (1996)
Published: (1996)
Loss of vital AC power with subsequent reactor coolant system heat-up.
Published: (1990)
Published: (1990)
Assessment of emergency core cooling system effectiveness for light water nuclear power reactors.
by: Finlayson, Fred C.
Published: (1975)
by: Finlayson, Fred C.
Published: (1975)
Inadequate core cooling instrumentation system.
Published: (1982)
Published: (1982)