Recent operating experience on loss of reactor coolant inventory while In a shutdown condition.

Loss of decay heat removal due to loss of fluid levels in reactor coolant system.
Published: (1986)

Inadequate control of reactor coolant system conditions during shutdown.
Published: (1993)

Loss of high head safety injection emergency boration and reactor coolant makeup capability.
Published: (1982)

Actuation of ECCS in the recirculation mode while in hot shutdown.
Published: (1980)

Loss of residual heat removal (RHR) while the reactor coolant system (RCS) is partially filled.
Published: (1987)

Possible sudden loss of RCS inventory during low coolant level operation.
Published: (1988)

Inadvertent reduction in primary coolant inventory in boiling water reactors during shutdown and startup.
Published: (1984)

Diversion of the residual heat removal pump seal cooling water flow during recirculation operation following a loss-of-coolant accident.
Published: (1989)

Depressurization of reactor coolant systems in pressurized-water reactors.
Published: (1987)

Inter-system discharge of reactor coolant.
Published: (1990)

Loss of emergency boration capability due to nitrogen gas intrusion.
Published: (1987)

Potential for loss of post-LOCA recirculation capability due to insulation debris blockage.
Published: (1985)

Loss of reactor coolant inventory and potential loss of emergency mitigation functions while in a shutdown condition.
Published: (1995)

Degradation of shutdown cooling system performance.
Published: (1993)

Potential for degradation of the emergency core cooling system and the containment spray system after a loss-of-coolant accident because of construction and protective coating deficiencies and foreign material in containment.
Published: (1998)

Undetected accumulation of gas in reactor coolant system and inaccurate reactor water level indication during shutdown.
Published: (1996)

Partial bypass of shutdown cooling flow from the reactor vessel.
Published: (1996)

Loss of decay heat removal--10 CFR 50.54(f).
Published: (1988)

Potential for common-mode failure of high pressure safety injection pumps or release of reactor coolant outside containment during a loss-of-coolant accident.
Published: (1990)

Unisolatable reactor system coolant leak following repeated applications of leak sealant.
Published: (1993)

GSI-191 PWR sump screen blockage chemical effects tests : thermodynamic simulations /
Published: (2006)

Degradation of residual heat removal (RHR) system.
Published: (1981)

Turbine overspeed and reactor cooldown during shutdown evaluation.
Published: (1994)

Fuel fragmentation, relocation, and dispersal during the loss-of-coolant accident /
by: Raynaud, Patrick A. C.
Published: (2012)

Overpressurization of reactor coolant system.
Published: (1982)

Recent experience with reactor coolant system leakage and boric acid corrosion.
Published: (2004)

Safety system response to loss of coolant and loss of offsite power.
Published: (1993)

Undetected accumulation of gas in reactor coolant system.
Published: (1994)

Optimal shutdown control of nuclear reactors /
Published: (1966)

Isolation of reactor coolant system from low-pressure systems outside containment.
Published: (1984)

Reactor coolant system leakage from a control rod drive threaded connection.
Published: (2017)

Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

Degaded throttle valves in emergency core cooling system resulting from cavitation-induced erosion during a loss-of-coolant accident.
Published: (1997)

The "calculated" loss-of-coolant accident : a review /
by: Ybarrondo, L. J.
Published: (1972)

TRAC-PF1/MOD1 calculations of LOFT experiment LP-02-6 /
by: Coddington, P., et al.
Published: (1992)