Cover Image

Recent problems with service water systems.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : Uniited States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1990.
Series:	Information notice ; no. 90-39.
Subjects:	Nuclear reactors > Cooling. Feed-water pumps.
Online Access:	https://purl.fdlp.gov/GPO/gpo151727

Similar Items

Monitoring vibration to detect circumferential cracking of reactor coolant pump and reactor recirculation pump shafts.
Published: (2005)

Failures of reactor coolant pump thermal barriers and check valves in foreign plants.
Published: (1997)

Degradation of reactor coolant pump studs.
Published: (1980)

Charging pump trip during a loss-of-coolant event caused by low suction pressure.
Published: (1994)

Potential for common-mode failure of high pressure safety injection pumps or release of reactor coolant outside containment during a loss-of-coolant accident.
Published: (1990)

Design deficiency in the turbine-driven auxiliary feedwater pump cooling water system.
Published: (1989)

Potential for loss of minimum flow paths leading to ECCS pump damage during a LOCA.
Published: (1985)

Potential for residual heat removal pump damage caused by parallel pump interaction.
Published: (1990)

Implementation of TMI action item II.K.3.5, "Automatic trip of reactor coolant pumps".
Published: (1985)

Implementation of TMI action item II.K.3.5, "Automatic trip of reactor coolant pumps".
Published: (1986)

Resolution of TMI action item II.k.3.5, "Automatic trip of reactor coolant pumps".
Published: (1983)

Implementation of TMI action item II.K.3.5, "Automatic trip of reactor coolant pumps".
Published: (1986)

Potential RHR pump loss.
Published: (1987)

Loss of flow from the residual heat removal pump during refueling cavity breakdown.
Published: (1992)

Failures of RHR pump motors and pump internals.
Published: (1986)

Reactor coolant pump lube oil fire.
Published: (1994)

Separation of primary reactor coolant pump shaft and impeller.
Published: (1985)

Part 21--inadequately staked capscrew renders residual heat removal pump inoperable.
Published: (2003)

Recent operating experience on loss of reactor coolant inventory while In a shutdown condition.
Published: (1990)

Failure of residual heat removal pump bearings due to high thrust loading.
Published: (1993)

Water chemistry and corrosion problems in nuclear power plants : proceedings of an International Symposium on Water Chemistry and Corrosion Problems of Nuclear Reactor Systems and Components /
Published: (1983)

Service water system problems affecting safety-related equipment.
Published: (1989)

Degradation or loss of charging systems at PWR nuclear power plants using swing-pump designs.
Published: (1986)

Excessive reactor coolant leakage following a seal failure in a reactor coolant pump or reactor recirculation pump.
Published: (1993)

Notice of forthcoming meeting with GE to discussed proposed BWR feedwater nozzle leakage detection system.
Published: (1980)

Main feedwater system degradation in safety-related ASME code class 2 piping inside the containment of a pressurized water reactor.
Published: (2001)

Loss of decay heat removal due to loss of fluid levels in reactor coolant system.
Published: (1986)

Diversion of the residual heat removal pump seal cooling water flow during recirculation operation following a loss-of-coolant accident.
Published: (1989)

Complete loss of main and auxiliary feedwater at a PWR designed by Babcock & Wilcox.
Published: (1985)

Resolution of generic issue 101 "Boiling water reactor water level redundancy".
Published: (1989)

PWR auxiliary feedwater pump turbine control problems.
Published: (1986)

Loss of inventory from safety-related, closed-loop cooling water systems.
Published: (1998)

Depressurization of reactor coolant systems in pressurized-water reactors.
Published: (1987)

Recent events involving reactor coolant system inventory control during shutdown.
Published: (1997)

Loss of emergency boration capability due to nitrogen gas intrusion.
Published: (1987)

Potential for loss of post-LOCA recirculation capability due to insulation debris blockage.
Published: (1985)

Undetected loss of reactor coolant.
Published: (1987)

Loss of high head safety injection emergency boration and reactor coolant makeup capability.
Published: (1982)

Resolution of generic safety issue 93, "Steam binding of auxiliary feedwater pumps".
Published: (1988)

Recent experience with reactor coolant system leakage and boric acid corrosion.
Published: (2004)