Failure to close service water cross-connect isolation valves.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1989.
Series:	Information notice ; no, 89-49.
Subjects:	Nuclear reactors > Cooling. Nuclear power plants > Piping > Valves.
Online Access:	https://purl.fdlp.gov/GPO/gpo151098

Similar Items

LWR primary coolant system pressure isolation valves.
Published: (1980)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

RHR valve misalignment causes degradation of ECCS in PWRS.
Published: (1987)

Corrosion of valve-to-torque tube keys in spray pond cross connect valves.
Published: (1990)

Primary containment isolation valve discrepancies.
Published: (1983)

Main steam isolation valve guide rail failure at Waterford Unit 3.
Published: (1988)

Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Failures of main steam isolation valves.
Published: (1988)

Valve stem corrosion failures.
Published: (1985)

Failure of a boiling water reactor target rock main steam safety/relief valve.
Published: (2003)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Main steam isolation valve closure logic.
Published: (1985)

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Inadequate inservice testing of main steam isolation valves.
Published: (1985)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Direction-dependent leak characteristics of containment purge valves.
Published: (1988)

Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)

Failure of auxiliary feedwater manual isolation valve.
Published: (1986)

Main steam isolation valve failure events.
Published: (2015)

Failures of main steam isolation check valves resulting in disc separation.
Published: (1990)

Failure of main steam isolation valves as a result of sticking solenoid pilot valves.
Published: (1995)

Check valve failures.
Published: (1981)

Containment purging and venting during normal operation--guidelines for valve operability.
Published: (1979)

Failure of air check valves to seat.
Published: (1985)

Failures of scram discharge volume vent and drain valves.
Published: (1986)

Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Failures of nut-locking devices in check-valves.
Published: (1993)

Failures of Rockwell International globe valves.
Published: (1984)

Valve-stem failure caused by embrittlement.
Published: (1992)

Availability of NUREG-1169, "Technical findings related to Generic Issue C-8; boiling water reactor main steam isolation valve leakage and leakage treatment methods".
Published: (1986)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)