Cover Image

Failure of DC motor-operated valves to develop rated torque because of improper cable sizing.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1989.
Series:	Information notice ; no. 89-11.
Subjects:	Nuclear power plants > Electric equipment. Nuclear power plants > Piping > Valves. Electric cables.
Online Access:	https://purl.fdlp.gov/GPO/gpo150896

Similar Items

Inadequacies in the design of DC motor-operated valves.
Published: (1988)

Motor-operated valve torque switches set below the manufacturer's recommended value.
Published: (1984)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Valve stem corrosion failures.
Published: (1985)

Potential design deficiency in motor-operated valve control circuitry.
Published: (2013)

Potential deficiency in improperly rated field wiring to solenoid valves.
Published: (1984)

Recent NRC-sponsored testing of motor-operated valves.
Published: (1989)

Results of NRC-sponsored testing of motor-operated valves.
Published: (1990)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Potentially undersized valve actuators.
Published: (1988)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

IEB 85-03 evaluation of motor-operators identifies improper torque switch settings.
Published: (1986)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Potential deficiencies in environmental qualification of Limitorque motor valve operator wiring.
Published: (1986)

Status of motor-operated valve performance prediction program by the Electric Power Research Institute.
Published: (1993)

Failure of air check valves to seat.
Published: (1985)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Check valve failures.
Published: (1981)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Motor-operated valve actuator thrust variations measured with a torque thrust cell and a strain gage.
Published: (1993)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Failures of Rockwell International globe valves.
Published: (1984)

Valve-stem failure caused by embrittlement.
Published: (1992)

Corrosion of valve-to-torque tube keys in spray pond cross connect valves.
Published: (1990)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Failures of nut-locking devices in check-valves.
Published: (1993)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

Vibration-induced valve failures.
Published: (1983)

Failures of air-operated valves affecting safety-related systems.
Published: (1988)

Standby liquid control system squib valves failure to fire.
Published: (1986)

Failures of main steam isolation valves.
Published: (1988)

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Potentially substandard valve replacement parts.
Published: (1988)

Check valve problems.
Published: (1982)