Residual stress measurements of Ni-base superalloys through neutron diffraction /

Quantifying residual stresses by means of thermoelastic stress analysis /
by: Gyekenyesi, Andrew L., et al.
Published: (2001)

Residual stresses in a NiCrY-coated powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2017)

Introduction to the characterization of residual stress by neutron diffraction /
by: Hutchings, Michael T., et al.
Published: (2005)

Measurement of Residual and Applied Stress Using Neutron Diffraction /
by: Hutchings, Michael T.
Published: (1992)

Retention of compressive residual stresses introduced by shot peening in a powder metal disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Relation between residual and hoop stresses and rolling bearing fatigue life /
by: Oswald, Fred B., et al.
Published: (2015)

Characterization of residual stress effects on fatigue crack growth of a friction stir welded aluminum alloy /
by: New, John A.
Published: (2015)

Residual stresses induced due to curing of the bulk matrix in a simplified three-dimensional (3D) woven repeating unit cell /
by: Bukenya, Kalima
Published: (2021)

Residual stress measurement using X-ray diffraction /
by: Anderoglu, Osman, 1979-
Published: (2005)

Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system /
by: Ghosn, Louis J.
Published: (2002)

Bi-metallic composite structures with designed internal residual stress field /
by: Brice, Craig A.
Published: (2014)

Nonlinear damage analysis- postulate and evaluation /
by: Leis, B. N., et al.
Published: (1983)

In-situ investigation of advanced structural coatings and composites /
by: Ustundag, Ersan
Published: (2003)

Quantification of processing effects on filament wound pressure vessels /
by: Aiello, Robert A., et al.
Published: (1999)

Weld stresses beyond elastic limit : materials discontinuity /
by: Verderaime, V.
Published: (1989)

Analysis of residual stress by diffraction using neutron and synchrotron radiation /
Published: (2003)

Handbook of measurement of residual stresses /
Published: (1996)

Effect of upper-cycle temperature on the load-biased, strain-temperature response of NiTi /
Published: (2011)

Residual stress : measurement by diffraction and interpretation /
by: Noyan, Ismail C. (Ismail Cevdet), 1956-
Published: (1987)

Low temperature creep of hot-extruded near-stoichiometric NiTi shape memory alloy /
by: Raj, Sai V., et al.
Published: (2013)

Optimal fabrication processes for unidirectional metal-matrix composites : a computational simulation /
by: Saravanos, D. A.
Published: (1990)

Neutron diffraction /
by: Bacon, G. E. (George Edward), 1917-
Published: (1975)

Neutron diffraction.
by: Bacon, G. E. (George Edward), 1917-
Published: (1955)

Neutron diffraction.
by: Bacon, G. E. (George Edward), 1917-
Published: (1962)

Advanced gear alloys for ultra high strength applications /
by: Shen, Tony, et al.
Published: (2011)

Neutron diffraction /
Published: (1978)

Photoelectrochemical fabrication of spectroscopic diffraction gratings--phase II /
by: Rauh, R. D.
Published: (1990)

Adaptive unstructured meshing for thermal stress analysis of built-up structures /
by: Dechaumphai, Pramote
Published: (1992)

Flexible micropost arrays for shear stress measurement /
by: Wohl, Christopher J.
Published: (2015)

Hypervelocity impact of unstressed and stressed titanium in a Whipple configuration in support of the Orion Crew Exploration Vehicle Service Module propellant tanks /
Published: (2010)

Effect of notches on creep-fatigue behavior of a P/M nickel-based superalloy /
by: Telesman, Jack
Published: (2015)

Non-classical stress concentration behavior in a radially stretched hyperelastic sheet containing a circular hole /
by: Ko, William L., et al.
Published: (2017)

Rolling bearing steels : a technical and historical perspective /
by: Zaretsky, Erwin V.
Published: (2012)

Thermal expansion of vacuum plasma sprayed coatings /
by: Raj, S. V.
Published: (2010)

Effect of stress concentrations in composite structures : progress report /
by: Babcock, Charles D.
Published: (1985)

Stress analysis and fracture in nanolaminate composites /
by: Chamis, C. C. (Christos C.)
Published: (2008)