Design and analysis of buckling-critical large-scale sandwich composite cylindrical test articles /

Buckling test results from the 8-foot-diameter orthogrid-stiffened cylinder test article TA01 : test dates: 19-21 November 2008 /
by: Hilburger, Mark W. (Mark William), et al.
Published: (2015)

Buckling test results and preliminary test and analysis correlation from the 8-foot-diameter orthogrid-stiffened cylinder test article TA02 : test dates: 3-6 February 2009 /
by: Hilburger, Mark W. (Mark William)
Published: (2017)

Buckling and postbuckling behavior of compression-loaded isotropic plates with cutouts /
by: Nemeth, Michael P.
Published: (1990)

Buckling and vibration of fiber reinforced composite plates with nanofiber reinforced matrices /
by: Chamis, C. C. (Christos C.)
Published: (2011)

Mechanical- and thermal-buckling behavior of rectangular plates with different central cutouts /
by: Ko, William L.
Published: (1998)

Design of 8-ft-diameter barrel test article attachment rings for Shell Buckling Knockdown Factor Project /
by: Lovejoy, Andrew E.
Published: (2010)

An assessment of SeaWiFS and MODIS ocean coverage /
by: Woodward, Robert H., et al.
Published: (1998)

Longitudinal weld land buckling in compression-loaded orthogrid cylinders /
by: Thornburgh, Robert P.
Published: (2010)

Buckling behavior of long anisotropic plates subjected to combined loads /
by: Nemeth, Michael P.
Published: (1996)

Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts /
by: Nemeth, Michael P.
Published: (1990)

Innovative design of composite structures : the use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes /
by: Hyer, M. W.
Published: (1990)

Design and calibration of an airborne multichannel swept-tuned spectrum analyzer /
by: Hamory, Philip J., et al.
Published: (1999)

Effects of thickness and ply orientation on buckling of laminated plates /
by: Jegley, Dawn C.
Published: (1986)

CGRO cycle 6 final report : the calibration of the BATSE spec detectors /
by: Schwartz, Richard Alan
Published: (1999)

Development of curved-plate elements for the exact buckling analysis of composite plate assemblies including transverse-shear effects /
by: McGowan, David M.
Published: (1999)

An integrating matrix formulation for buckling of rotating beams including the effects of concentrated masses /
by: Lakin, William D.
Published: (1989)

An integrating matrix formulation for buckling of rotating beams including the effects of concentrated masses /
by: Lakin, William D.
Published: (1989)

Effects of state recovery on creep buckling under variable loading /
by: Robinson, D. N., et al.
Published: (1986)

Stacking-sequence optimization for buckling of laminated plates by integer programming /
by: Haftka, Raphael T.
Published: (1991)

Design guide for predicting nonlinear random response (including snap-through) of buckled plates /
by: Ng, Chung Fai
Published: (1989)

Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation /
by: Ko, William L.
Published: (1996)

Innovative design of composite structures : the use of curvilinear fiber format in composite structure design /
by: Hyer, M. W.
Published: (1990)

Evaluation of the linear aerospike SR-71 experiment (LASRE) oxygen sensor /
by: Ennix, Kimberly A.
Published: (1999)

Predictions of thermal buckling strengths of hypersonic aircraft sandwich panels using minimum potential energy and finite element methods /
by: Ko, William L.
Published: (1995)

Transverse vibration and buckling of a cantilevered beam with tip body under constant axial base acceleration /
by: Storch, Joel, et al.
Published: (1983)

The use of Lanczos's method to solve the large generalized symmetric definite eigenvalue problem /
by: Jones, Mark T.
Published: (1989)

Design, optimization and evaluation of integrally stiffened Al 7050 panel with curved stiffeners /
Published: (2011)

The use of Lanczos's method to solve the large generalized symmetric definite eigenvalue problem in parallel /
by: Jones, Mark T.
Published: (1990)

Measurement of displacement around holes in composite plates subjected to quasi-static compression /
by: Duke, John C. (John Christian), 1951-
Published: (1986)

Postbuckling delamination of a stiffened composite panel using finite element methods /
by: Natsiavas, S., et al.
Published: (1987)

Progressive failure studies of composite panels with and without cutouts /
Published: (2001)

Development of a fluid structures interaction test technique for fabrics /
by: Zilliac, Gregory G.
Published: (2012)

Modular instrumentation system for real-time measurements and control on reciprocating engines /
by: Rice, William J., et al.
Published: (1980)

Finite element analysis and test results comparison for the hybrid wing body center section test article /
by: Przekop, Adam
Published: (2016)

Simplified models for the study of postbuckled hat-stiffened composite panels /
by: Vescovini, Riccardo
Published: (2012)

Skin/stiffener interface stresses in composite stiffened panels /
by: Wang, James Ting-Shun
Published: (1984)