Cover Image

Direction-dependent leak characteristics of containment purge valves.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1988-1989.
Series:	Information notice ; no. 88-73.
Subjects:	Nuclear reactors > Containment. Nuclear power plants > Piping > Valves.
Online Access:	https://purl.fdlp.gov/GPO/gpo150218

Similar Items

Containment purging and venting during normal operation--guidelines for valve operability.
Published: (1979)

Containment purging and venting during normal operation.
Published: (1979)

Primary containment isolation valve discrepancies.
Published: (1983)

Breach of containment integrity.
Published: (1979)

Inadvertent containment spray due to personnel error.
Published: (1981)

Excessive nitrogen supply pressure actuates safety-relief valve operation to cause reactor depressurization.
Published: (1980)

Susceptibility of containment sump recirculation gate valves to pressure locking.
Published: (1995)

Failure of swing check valve in the decay heat removal system at Davis-Besse Unit No. 1.
Published: (1980)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)

Failure to close service water cross-connect isolation valves.
Published: (1989)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

LWR primary coolant system pressure isolation valves.
Published: (1980)

RHR valve misalignment causes degradation of ECCS in PWRS.
Published: (1987)

Valve stem corrosion failures.
Published: (1985)

Failure of a boiling water reactor target rock main steam safety/relief valve.
Published: (2003)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Main steam isolation valve guide rail failure at Waterford Unit 3.
Published: (1988)

Leak of reactor water to reactor building caused by scram solenoid valve problem.
Published: (1985)

Main steam isolation valve closure logic.
Published: (1985)

Inadequate inservice testing of main steam isolation valves.
Published: (1985)

Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)

Check valve problems.
Published: (1982)

Potentially substandard valve replacement parts.
Published: (1988)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

Degradation of containment isolation capability by a high-energy line break.
Published: (1989)

Undetected modification of flow characteristics in the high pressure safety Injection system.
Published: (1993)

Failure of air check valves to seat.
Published: (1985)

Failures of scram discharge volume vent and drain valves.
Published: (1986)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Velan swing check valves.
Published: (1981)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Horizontally-installed motor-operated gate valves.
Published: (1992)