http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Biomass extrusion and reaction technologies
principles to practices and future potential
Archer Daniels Midland Company, Decatur, Illinois, North Carolina State University, Raleigh, North Carolina.
Qilu University of Technology (Shandong Academy of Sciences), Jinan, P.R. China, North Carolina State University, Raleigh, North Carolina.
Division of Cellulose and Renewable Materials,
1 online resource (280 pages) : illustrations (some color).
Using Reactive Extrusion To Manufacture Greener Products: From Laboratory Fundamentals to Commercial Scale / Giri, Preetam, Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, Michigan 48824, United States; Tambe, Chetan, Cardolite Corporation, 11 Deer Park Dr., Suite 124, Monmouth Junction, New Jersey 08852, United States; Narayan, Ramani, Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, Michigan 48824, United States / Twin-Screw Extrusion: A Key Technology for the Biorefinery / Evon, P.; Vandenbossche, V.; Candy, L.; Pontalier, P.-Y.; Rouilly, A. / Contribution of Reactive Extrusion to Technological and Scientific Challenges of Eco-Friendly Circular Economy / Massardier, Valerie, CNRS, UMR 5223, Ingénierie des Matériaux polymères, Université de Lyon, F-69003, INSA de Lyon, F-69621 Villeurbanne, France; Quitadamo, Alessia, CNRS, UMR 5223, Ingénierie des Matériaux polymères, Université de Lyon, F-69003, INSA de Lyon, F-69621 Villeurbanne, France, Sapienza, Department of Chemical and Material Engineering, University of Rome, via Eudossiana 18, 00184 Rome, Italy / Preparation of Cationic Starches by Reactive Extrusion: Experiments and Modelling / Berzin, Françoise, UMR FARE (Fractionnement des AgroRessources et Environnement), Université de Reims Champagne-Ardenne, INRA, 2 esplanade Roland-Garros, 51686 Reims, France; Vergnes, Bruno, MINES ParisTech, PSL Research University, CEMEF (Centre de Mise en Forme des Matériaux), UMR CNRS 7635, CS10207, 06904, Sophia Antipolis Cedex, France / Starch Extrudates as Sustainable Ingredients in Food and Non-Food Applications / Milotskyi, Romain, Institut de Chimie Moléculaire de Reims, ICMR, CNRS UMR 7312, URCA, B18, UFR SEN, Moulin de la Housse, Chemin de Roulliers, BP 1039, F 51 687, Reims, Cedex 2, France; Bliard, Christophe, Institut de Chimie Moléculaire de Reims, ICMR, CNRS UMR 7312, URCA, B18, UFR SEN, Moulin de la Housse, Chemin de Roulliers, BP 1039, F 51 687, Reims, Cedex 2, France; Venditti, Richard, College of Natural Resources, Department of Forest Biomaterials, North Carolina State University, 2820 Faucette Dr., Campus Box 8001, Raleigh, North Carolina 27695, United States; Ayoub, Ali, College of Natural Resources, Department of Forest Biomaterials, North Carolina State University, 2820 Faucette Dr., Campus Box 8001, Raleigh, North Carolina 27695, United States / Melt Stability of Starch-Filled LDPE during Multi-Pass Extrusion Determined by Melt-Flow and Non-Isothermal Thermogravimetric Investigations / Cran, Marlene J., Institute for Sustainable Industries and Liveable Cities Victoria University, P.O. Box 14428, Melbourne, 8001, Australia; Bigger, Stephen W., Institute for Sustainable Industries and Liveable Cities Victoria University, P.O. Box 14428, Melbourne, 8001, Australia; Venditti, Richard A., College of Natural Resources, Department of Forest Biomaterials, North Carolina State University, Raleigh, North Carolina 27695, United States; Pawlak, Joel J., College of Natural Resources, Department of Forest Biomaterials, North Carolina State University, Raleigh, North Carolina 27695, United States; Livi, Sebastien, University of Lyon, INSA de Lyon, CNRS, IMP UMR 5223, Villeurbanne 69621, France; Ayoub, Ali, College of Natural Resources, Department of Forest Biomaterials, North Carolina State University, Raleigh, North Carolina 27695, United States / Current Challenges in Melt Extrusion of Cellulose-Based Nanocomposites / Dufresne, Alain / Spinning of Cellulose Nanofibrils / Lundahl, Meri J. / Microcellular Foaming of (Nano)Biocomposites by Continuous Extrusion Assisted by Supercritical CO2 / Le Moigne, Nicolas, C2MA, IMT Mines Alès, Université de Montpellier, 6 Avenue de Clavières, 30319 Alès Cedex, France; Sauceau, Martial, C2MA, IMT Mines Alès, Université de Montpellier, 6 Avenue de Clavières, 30319 Alès Cedex, France; Chauvet, Margot, Centre RAPSODEE, IMT Mines Albi, CNRS, Université de Toulouse, 81013 Albi, France; Bénézet, Jean-Charles, C2MA, IMT Mines Alès, Université de Montpellier, 6 Avenue de Clavières, 30319 Alès Cedex, France; Fages, Jacques, Centre RAPSODEE, IMT Mines Albi, CNRS, Université de Toulouse, 81013 Albi, France / Extrusion and Ionic Liquids: A Promising Combination To Develop High Performance Polymer Materials / Lins, Luanda C., Institute of Chemistry, University of Campinas (UNICAMP), P.O. Box 6154, 13083-970 Campinas, Brazil; Livi, Sébastien, Univ Lyon, INSA Lyon, CNRS, IMP UMR 5223, F-69621, Villeurbanne, France / Wet Feeding Approach for Cellulosic Materials/PCL Biocomposites / Lo Re, Giada, Division of Biocomposites, Department of Fiber and Polymer Technology, KTH Royal Institute of Technology, Teknikringen 56, SE-100 44 Stockholm, Sweden; Sessini, Valentina, Laboratory of Polymeric and Composite Materials, University of Mons – UMONS, Place du Parc 23, 7000 Mons, Belgium / Cellulose and Nanocellulose Produced from Lignocellulosic Residues by Reactive Extrusion / Debiagi, Flavia; Faria-Tischer, Paula C. S.; Mali, Suzana / Applying Mathematical Optimization To Efficiently Make Better Decisions for Extrusion Technology: State-of-the-Art and Opportunities / Enayati, Shakiba, Management, Information Systems, and Analytics, School of Business and Economics at State University of NY, Plattsburgh, New York 12901, United States; Ayoub, Ali, North Carolina State University, College of Natural Resources, Raleigh, North Carolina 27695, United States, U.S. Department of the Interior, South East Center, Raleigh, North Carolina 27695, United States / Editors’ Biographies /
Ali Ayoub, editor, Archer Daniels Midland Company, Decatur, Illinois and North Carolina State University, Raleigh, North Carolina, Lucian Lucia, editor, North Carolina State University, Raleigh, North Carolina, sponsored by the ACS Division of Cellulose and Renewable Materials American Chemical Society, Washington, DC.
Distributed in print by Oxford University Press.
Includes bibliographical references and index.
TECHNOLOGY & ENGINEERING / Environmental / General