ECCS calculations on fuel cladding.

Axial clad strain behavior of sphere-pac fuel pins /
by: Thomas, James Kelly, 1962-
Published: (1986)

Corrosion of research reactor aluminium clad spent fuel in water.
Published: (2003)

Degradation of automatic ECCS actuation capability by isolation of instrument lines.
Published: (1981)

Realistic emergency core cooling system evaluation model effects resulting from nuclear fuel thermal conductivity degradation.
Published: (2011)

Effect of a DC power supply failure on ECCS performances.
Published: (1980)

Assessment of current test methods for post-LOCA cladding behavior /
by: Billone, Michael C.
Published: (2012)

Corrosion of research reactor aluminium clad spent fuel in water.
Published: (2009)

Loss of particles through a clad breach in a simulated sphere-pac fuel pin /
by: Sunderland, Dion Julian, 1957-
Published: (1985)

Mechanical behavior of ballooned and ruptured cladding /
by: Flanagan, Michelle
Published: (2012)

Actuation of ECCS in the recirculation mode while in hot shutdown.
Published: (1980)

Cracking in charging pump casing cladding.
Published: (1980)

Cladding rupture, swelling & coolant blockage as a result of a reactor accident.
Published: (1979)

Design deficiencies can lead to reduced ECCS pump net positive suction head during design-basis accidents.
Published: (1998)

Data base on the behavior of high burnup fuel rods with Zr-1%Nb cladding and UO₂ fuel (VVER type) under reactivity accident conditions.
by: Yegorova, L. A. (Larisa Alexandrovna)
Published: (1999)

High temperature gas cooled reactor fuels and materials /
Published: (2010)

Analysis of the test OECD-PKL2 G7.1 with the thermal-hydraulic system code TRACE /
by: Belaïd, S., et al.
Published: (2013)

Potentially inadequate performance of ECCS in PWRs during recirculation operation following a LOCA.
Published: (1988)

Cracking of cladding and its heat-affected zone in the base metal of a reactor vessel head.
Published: (1990)

Managing gas accumulation in emergency core cooling, decay heat removal, and containment spray systems.
Published: (2008)

HPCI/RCIC high steam flow setpoints.
Published: (1982)

Potential for loss of minimum flow paths leading to ECCS pump damage during a LOCA.
Published: (1985)

Foreign material found in the emergency core cooling system.
Published: (2006)

Knowledge base for the effect of debris on pressurized water reactor emergency core cooling sump performance /
Published: (2003)

Durability of cladding : a state of the art report /
by: Ryan, P. A.
Published: (1994)

Durability of cladding : a state of art report /
by: Ryan, P. A.
Published: (1994)

Ultrasonic phased array assessment of the interference fit and leak path of the North Anna Unit 2 control rod drive mechanism nozzle 63 with destructive validation /
by: Crawford, S. L.
Published: (2012)

Potential common cause vulnerabilities in essential service water systems.
Published: (2007)

Reactor vessel top guide and core plate cracking.
Published: (1995)

Characterization and head-loss testing of latent debris from pressurized-water-reactor containment buildings /
Published: (2005)

Potential common cause vulnerabilities in essential service water systems due to inadequate chemistry controls.
Published: (2007)

An evaluation of thermal modeling techniques utilized for nuclear fuel rods /
by: Simmons, Jeffrey Warren, 1963-
Published: (1989)

Metallurgical and mechanical properties of thorium-doped Ir-0.3% W alloys /
by: Liu, C. T. (Chain Tsuan), 1937-
Published: (1980)

Inadvertent loss of capability for emergency core cooling system motors.
Published: (1997)

Incorrect unreviewed safety question determination related to emergency core cooling system swapover from the injection mode to the recirculation mode.
Published: (1997)

Recent operating experience of service water systems due to external conditions.
Published: (2006)

Operating experience regarding entrainment of air into emergency core cooling and containment spray systems.
Published: (2006)